Content for TS 31.102 Word version: 18.5.0

0… 3… 4… 4.2.9… 4.2.17… 4.2.26… 4.2.34… 4.2.44… 4.2.52… 4.2.60… 4.2.68… 4.2.76… 4.2.85… 4.2.93… 4.2.101… 4.2.107… 4.3… 4.4.2… 4.4.2.4… 4.4.3… 4.4.4… 4.4.5… 4.4.6… 4.4.8… 4.4.8.7… 4.4.9… 4.4.11… 4.4.11.7… 4.4.11.17… 4.4.12… 4.5… 4.6… 4.6.5… 4.6.6… 4.7 5… 5.2… 5.3… 5.4… 5.9… 6… 7… 7.1.2… 7.3… A B… D E… G H… I… L… M…

4.4.11.17 EF_DRI (Disaster roaming information EF) 4.4.11.18 EF_5GSEDRX (5GS eDRX Parameters) 4.4.11.19 EF_{5GNSWO_CONF} (5G Non-Seamless WLAN Offload configuration) 4.4.11.20 EF_MCHPPLMN (Multiplier Coefficient for Higher Priority PLMN search) 4.4.11.21 EF_{KAUSF_DERIVATION} (K_AUSF derivation configuration)
...

4.4.11.17 EF_DRI (Disaster roaming information EF) |R17| p. 220

If service No. 140 is "available" in EFUST, this file shall be present.

This EF contains the indication of whether disaster roaming is enabled in the UE as specified in TS 23.122.

In addition it contains disaster roaming parameters indicating availability of each related information field.

Further it contains disaster roaming wait range as specified in TS 23.122, disaster return wait range as specified in TS 23.122, the indication of 'applicability of "lists of PLMN(s) to be used in disaster condition" provided by a VPLMN' and "list of PLMN(s) to be used in disaster condition" provided by the HPLMN' from the USIM into the ME, as specified in TS 24.501 Annex C.

Identifier: '4F0F'

Structure: transparent

Optional

SFI: '0F'

File size: ≥ 7 bytes

Update activity: low

Access Conditions:

READ	PIN
UPDATE	ADM
DEACTIVATE	ADM
ACTIVATE	ADM

Bytes	Description	M/O	Length
1	Disaster roaming is enabled	M	1 byte
2	Disaster roaming parameters indicator status	M	1 byte
3 to 4	Disaster roaming wait range	M	2 bytes
5 to 6	Disaster return wait range	M	2 bytes
7	Applicability indicator for "list of PLMN(s) to be used in disaster condition" provided by VPLMN	M	1 byte
8 to X + 7	"list of PLMN(s) to be used in disaster condition" provided by the HPLMN	O	X bytes

Storage is allocated for all of the possible disaster roaming parameters, regardless of whether they are present or absent. Any bytes unused, due to parameters not requiring all of the bytes, or due to absent parameters, shall be set to 'FF'.

Disaster roaming is enabled

Coding:

The indication of whether disaster roaming is enabled, it is coded in one byte as follows:

b8	b7	b6	b5	b4	b3	b2	b1
RFU, bit = 0							Indication of whether disaster roaming is enabled as described in TS 24.501

Disaster roaming parameters indicator status

Contents:

Each of the disaster roaming information parameters which can be stored in the remainder of the record are marked absent or present by individual bits within this byte.

Coding:

allocation of bits:

bit number	Parameter indicated
1	Disaster roaming wait range.
2	Disaster return wait range
3	Applicability indicator for "list of PLMN(s) to be used in disaster condition" provided by VPLMN.
4	"list of PLMN(s) to be used in disaster condition" provided by the HPLMN.
5	reserved, set to 1.
6	reserved, set to 1.
7	reserved, set to 1.
8	reserved, set to 1.

Bit value	Meaning
0	Parameter present
1	Parameter absent

Disaster roaming wait range

Coding:

The disaster roaming wait range is coded as specified in clause 9.11.3.84 of TS 24.501 and starts from octet 3 of the registration wait range as defined in Figure 9.11.3.84.1 of TS 24.501.

Disaster return wait range

Coding:

The disaster return wait range is coded as specified in clause 9.11.3.84 of TS 24.501 and starts from octet 3 of the registration wait range as defined in Figure 9.11.3.84.1 of TS 24.501.

Applicability indicator for "list of PLMN(s) to be used in disaster condition" provided by VPLMN

Coding:

The applicability indicator for "list of PLMN(s) to be used in disaster condition" provided by VPLMN is coded as specified in TS 24.501.

"list of PLMN(s) to be used in disaster condition" provided by the HPLMN

Contents:

As described in TS 24.501, it contains in descending priority order, a list of HPLMN provided PLMNs to be used in disaster condition.

Length	Description	Status
1 byte	list of PLMN(s) to be used in disaster condition tag ('80')	O
X bytes	Length of list of PLMN(s) to be used in disaster condition (3n, where n is the number of PLMNs)	O
3n bytes	list of PLMN(s) to be used in disaster condition	O

Coding:

Bytes	Description	M/O	Length
1 to 3	PLMN 1 (Highest priority)	O	3 bytes
4 to 6	PLMN 2	O	3 bytes
7 to 9	PLMN 3	O	3 bytes
10 to 12	PLMN 4	O	3 bytes
:	:	:	:
(3n-2) to 3n	PLMN n (Lowest priority)	O	3 bytes

Coding of PLMN:

Contents:

Mobile Country Code (MCC) followed by the Mobile Network Code (MNC).

Coding:

According to TS 24.501. For instance, using 246 for the MCC and 81 for the MNC and if this is stored in PLMN 3 the contents are as follows:

Bytes 7 to 9:

'42' 'F6' '18'.

If storage for fewer than n PLMNs is required, the unused bytes shall be set to 'FF'.

4.4.11.18 EF_5GSEDRX (5GS eDRX Parameters) |R17| p. 222

If service No. 141 is "available" in EFUST, this file shall be present.

This EF contains the following 5GS eDRX parameters:

ratType: Radio Access Technology Type;
edrxValue: Extended idle mode DRX cycle length.

Identifier: '4F10'

Structure: transparent

Optional

SFI: '10'

File size: X bytes, (X ≥ 2)

Update activity: low

Access Conditions:

READ	PIN
UPDATE	ADM
DEACTIVATE	ADM
ACTIVATE	ADM

Bytes	Description	M/O	Length
1	5GS ratType	M	1 byte
2	The extended idle mode DRX cycle length value	M	1 byte

5GS ratType

Contents:

The NG-RAN rat type which eDRX values are applicable to.

Coding:

b8	b7	b6	b5	b4	b3	b2	b1
						1: the rat type is NG-RAN 0: RFU	1: the rat type is Satellite NG-RAN 0: RFU

The extended idle mode DRX cycle length value

Contents:

The extended idle mode DRX cycle length value.

Coding:

This data object contains the extended idle mode DRX cycle length value, the coding of which is specified in TS 24.008 Table 10.5.5.32.

4.4.11.19 EF_{5GNSWO_CONF} (5G Non-Seamless WLAN Offload configuration) |R17| p. 223

If service No. 142 is "available", this file shall be present.

This EF contains 5G Non-Seamless WLAN Offload configuration related information.

If the 5G Non-Seamless WLAN Offload usage Indicator is enabled ME shall always use 5G NSWO as in TS 33.501 (i.e., it shall not use EPS NSWO).

Identifier: '4F11'

Structure: transparent

Optional

SFI: '11'

File size: ≥ 1 byte

Update activity: low

Access Conditions:

READ	PIN
UPDATE	ADM
DEACTIVATE	ADM
ACTIVATE	ADM

Bytes	Description	M/O	Length
1	5G Non-Seamless WLAN Offload usage Indicator	M	1byte

5G Non-Seamless WLAN Offload usage Indicator

Contents:

5G Non-Seamless WLAN Offload usage Indicator

Coding:

'00' - 5G Non-Seamless WLAN Offload usage Indicator is disabled
'01' - 5G Non-Seamless WLAN Offload usage Indicator is enabled
All other values are RFU

4.4.11.20 EF_MCHPPLMN (Multiplier Coefficient for Higher Priority PLMN search) |R17| p. 223

If service No. 144 is "available" in EFUST, this file shall be available.

This EF contains a multiplier coefficient which is used together with timer interval configured in EFHPPLMN to adjust the interval of time between two searches for a higher priority PLMN via NG-RAN satellite access (see TS 23.122).

Identifier: '4F15'

Structure: transparent

Optional

SFI: '15'

File size: X bytes, (X ≥ 1)

Update activity: low

Access Conditions:

READ	PIN
UPDATE	ADM
DEACTIVATE	ADM
ACTIVATE	ADM

Bytes	Description	M/O	Length
1	Multiplier coefficient for higher priority PLMN search	M	1 byte

Multiplier coefficient

Contents:

The multiplier coefficient to adjust the time interval for higher priority PLMN search.

Coding:

For UEs supporting satellite NG-RAN access as specified in TS 23.122, the multiplier coefficient is coded as an unsigned byte. The range is from one to a maximum value of 255. The encoding is:

'00': Not defined.
'01': 1;
'02': 2;
...
'FF': 255; (maximum value).

4.4.11.21 EF_{KAUSF_DERIVATION} (K_AUSF derivation configuration) |R17| p. 224

If service No. 145 is "available", this file shall be present. This EF contains the configuration parameter for KAUSF derivation, as defined in TS 33.501.

Identifier: '4F16'

Structure: transparent

Optional

SFI: '16'

File size: X bytes, (X ≥ 1)

Update activity: low

Access Conditions:

READ	PIN
UPDATE	ADM
DEACTIVATE	ADM
ACTIVATE	ADM

Bytes	Description	M/O	Length
1	KAUSF derivation configuration	M	1 byte
2 to X	RFU	O	X bytes

Multiplier coefficient

Contents:

Configuration for KAUSF derivation

Coding:

b8	b7	b6	b5	b4	b3	b2	b1
RFU (see TS 31.101)							KAUSF derivation configuration in SNPN: b1=0 Use EMSK for derivation of KAUSF in SNPN b1=1 Use MSK for derivation of KAUSF in SNPN

Content for TS 31.102 Word version: 18.5.0

4.4.11.17 EFDRI (Disaster roaming information EF) |R17| p. 220

4.4.11.18 EF5GSEDRX (5GS eDRX Parameters) |R17| p. 222

4.4.11.19 EF5GNSWO_CONF (5G Non-Seamless WLAN Offload configuration) |R17| p. 223

4.4.11.20 EFMCHPPLMN (Multiplier Coefficient for Higher Priority PLMN search) |R17| p. 223

4.4.11.21 EFKAUSF_DERIVATION (KAUSF derivation configuration) |R17| p. 224

4.4.11.17 EF_DRI (Disaster roaming information EF) |R17| p. 220

4.4.11.18 EF_5GSEDRX (5GS eDRX Parameters) |R17| p. 222

4.4.11.19 EF_{5GNSWO_CONF} (5G Non-Seamless WLAN Offload configuration) |R17| p. 223

4.4.11.20 EF_MCHPPLMN (Multiplier Coefficient for Higher Priority PLMN search) |R17| p. 223

4.4.11.21 EF_{KAUSF_DERIVATION} (K_AUSF derivation configuration) |R17| p. 224