The input data listed in
clause 5.2.5.2.2 of TS 23.502 apply when an AM Policy Association is created for a 5G-RG, except for the handling of RFSP information that applies only if a 5G RG is registered over 3GPP access.
The input information when the UE registers via W-5GAN includes the Access type set to non-3GPP access, the User Location Information including the GLI or the HFC node Id.
The output information when the UE registers via W-5GAN is defined in
clause 9.5 and the Policy Control Request triggers applicable for for RG access via W-5GAN are defined in
clause 9.5.3.
The input data listed in
clause 5.2.5.2.5 of TS 23.502 apply when an AM Policy Association is updated for a 5G-RG or for a FN-RG, except for the notification of UE location change (if an RG registers only on Wireline access), PRA changes or RFSP index change.
PCRT on UE location change apply when a 5G RG registers on a second access (5G RG using Hybrid access).
The output information when the UE registers via W-5GAN is defined in
clause 9.5 and the Policy Control Request triggers applicable when RG accesses via W-5GAN are defined in
clause 9.5.3.
The Access type change trigger requests the AMF to report a new Access Type and RAT Type to the PCF. When the UE simultaneous connects over both 3GPP and wireline non-3GPP access type, the AMF reports the list of Access Type and RAT combinations available in the UE access and mobility context in the
Npcf_AMPolicyControl_Update service operation.