Tech-invite  3GPPspace  IETFspace
21  22  23  24  25  26  27  28  29  31  32  33  34  35  36  37  38  4‑5x

Content for  TS 26.131  Word version:  18.1.0

Top   Top   Up   Prev   Next
0…   5…   5.4…   5.4.3…   5.4.5…   5.4.7…   5.5…   5.8…   5.12…   6…   6.4…   6.4.3…   6.4.5…   6.4.7…   6.5…   6.8…   6.11…   6.12…   7…   7.4…   7.5…   7.8…   7.11…   7.12…   8…   8.4…   8.5…   8.8…   8.11…   8.12… 
8 Fullband telephony transmission performance  8.1 Applicability  8.2 Overall loss/loudness ratings  8.2.1 General  8.2.2 Connections with handset UE  8.2.2a Connections with handset UE in the presence of background noise  8.2.3 Connections with desktop hands-free UE  8.2.4 Connections with hand-held hands-free UE  8.2.5 Connections with headset UE  8.2.5a Connections with headset UE in the presence of background noise  8.2.6 Connections with electrical interface UE  8.3 Idle channel noise (handset, headset UE, and electrical interface UE)  8.3.1 Sending (handset and headset UE)  8.3.2 Receiving (handset and headset UE)  8.3.3 Sending (electrical interface UE)  8.3.4 Receiving (electrical interface UE) 
...

 

8  Fullband telephony transmission performance |R12|  p. 92

8.1  Applicability  p. 92

The performance requirements in this clause shall apply when UE is used to provide fullband telephony, either as a stand-alone service, or as part of a multimedia service. The requirements in the clause apply only when the far-end terminal is also providing fullband telephony. When a fullband-enabled terminal is providing narrowband telephony, the requirements in clause 5, 'narrowband telephony transmission performance' shall apply. When a fullband-enabled terminal is providing wideband telephony, the requirements in clause 6, 'Wideband telephony transmission performance' shall apply. When a fullband-enabled terminal is providing super-wideband telephony, the requirements in clause 7, 'Super-wideband telephony transmission performance' shall apply.
Up

8.2  Overall loss/loudness ratings  p. 93

8.2.1  General  p. 93

See requirements for super-wideband.

8.2.2  Connections with handset UE  p. 93

See requirements for super-wideband.
Compliance shall be checked by the relevant tests described in TS 26.132.

8.2.2a  Connections with handset UE in the presence of background noise |R15|  p. 93

See requirements for super-wideband.
Compliance shall be checked by the relevant tests described in TS 26.132.

8.2.3  Connections with desktop hands-free UE  p. 93

See requirements for super-wideband.
Compliance shall be checked by the relevant tests described in TS 26.132.

8.2.4  Connections with hand-held hands-free UE  p. 93

See requirements for super-wideband.
Compliance shall be checked by the relevant tests described in TS 26.132.

8.2.5  Connections with headset UE  p. 93

See requirements for super-wideband.
Compliance shall be checked by the relevant tests described in TS 26.132.

8.2.5a  Connections with headset UE in the presence of background noise |R15|  p. 93

See requirements for super-wideband.
Compliance shall be checked by the relevant tests described in TS 26.132.

8.2.6  Connections with electrical interface UE |R17|  p. 93

See requirements for super-wideband.
Compliance shall be checked by the relevant tests described in TS 26.132.

8.3  Idle channel noise (handset, headset UE, and electrical interface UE)  p. 94

8.3.1  Sending (handset and headset UE)  p. 94

See requirements for super-wideband.
Compliance shall be checked by the relevant test described in TS 26.132.

8.3.2  Receiving (handset and headset UE)  p. 94

See requirements for super-wideband.
Compliance shall be checked by the relevant test described in TS 26.132.

8.3.3  Sending (electrical interface UE) |R17|  p. 94

See requirements for super-wideband.
Compliance shall be checked by the relevant test described in TS 26.132.

8.3.4  Receiving (electrical interface UE) |R17|  p. 94

See requirements for super-wideband.
Compliance shall be checked by the relevant test described in TS 26.132.

Up   Top   ToC