Content for TS 26.131 Word version: 18.1.0
0…
5…
5.4…
5.4.3…
5.4.5…
5.4.7…
5.5…
5.8…
5.12…
6…
6.4…
6.4.3…
6.4.5…
6.4.7…
6.5…
6.8…
6.11…
6.12…
7…
7.4…
7.5…
7.8…
7.11…
7.12…
8…
8.4…
8.5…
8.8…
8.11…
8.12…
5.4.7 Electrical interface UE sending |R17| p. 22
The sensitivity/frequency characteristics shall be as follows:
The sending sensitivity frequency response measured at the electrical reference point shall be within a mask, which can be drawn between the points given in Table 6a. The mask is drawn with straight lines between the breaking points in Table 6a on a logarithmic (frequency) - linear (dB sensitivity) scale.
Frequency (Hz)Upper limit Lower limit
| Frequency (Hz) | Upper limit (dB) | Lower limit (dB) |
|---|---|---|
| 100 | 3 | |
| 200 | 3 | |
| 300 | 3 | -3 |
| 1 000 | 5 | -3 |
| 3 100 | 0 | |
| 3 400 | 12 | -5 |
| 4 000 | 12 | |
|
NOTE:
All sensitivity values are expressed in dB on an arbitrary scale.
|
||
Compliance shall be checked by the relevant test described in TS 26.132.
5.4.8 Electrical interface UE receiving |R17| p. 23
The sensitivity/frequency characteristics shall be as follows:
The receiving sensitivity frequency response measured at the output of the electrical interface UE shall be within a mask, which can be drawn with straight lines between the breaking points in Table 6b on a logarithmic (frequency) - linear (dB sensitivity) scale.
| Frequency (Hz) | Upper limit | Lower limit |
|---|---|---|
| 100 | 2 | |
| 200 | 2 | |
| 300 | 2 | -6 |
| 1 000 | 2 | -2 |
| 2 000 | 6 | -2 |
| 3 400 | 6 | -5 |
| 4 000 | 6 | |
|
NOTE:
All sensitivity values are expressed in dB on an arbitrary scale.
|
||
Compliance shall be checked by the relevant test described in TS 26.132.
