This subclause describes the procedure for V2X application resource adapation where the VAE server maps the V2X application requirement to network resource request for single or groups of V2X UEs.
Figure 9.11.3.2-1 illustrates the procedure where the VAE server supports V2X application resource adaptation.
Pre-conditions:
-
The VAE server has the KPI information for the V2X services.
-
The VAE server is provided with the network monitoring information as per the subclause A.3.
-
The VAE server is configured with the NRM server information.
Step 1.
The V2X application specific server sends a V2X application requirement request to the VAE server for an adaptation of the V2X service operation per V2X UE or per group of UEs.
Step 2.
The VAE server translates the V2X application requirement to different network resource requirement for group of users, which may be a subset of V2X UEs within the V2X group that will be affected by application adaptation.
Step 3.
If the V2X application requirement is successfully translated to the network resource requirement, the VAE server sends a V2X application requirement response to the V2X application specific server.
Step 4.
The VAE server performs network resource adaptation by interacting with the NRM server as specified in the
TS 23.434 for the V2X application requirement received in step 1.
Step 5.
Based on the result of the network resource adaptation in step 4 corresponding to step 1, the VAE server sends a V2X application requirement notification to the V2X application specific server.