SNMP-TLS-TM-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE,
    OBJECT-IDENTITY, mib-2, snmpDomains,
    Counter32, Unsigned32, Gauge32, NOTIFICATION-TYPE
      FROM SNMPv2-SMI            -- RFC 2578 or any update thereof
    TEXTUAL-CONVENTION, TimeStamp, RowStatus, StorageType,
    AutonomousType
      FROM SNMPv2-TC             -- RFC 2579 or any update thereof
    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
      FROM SNMPv2-CONF           -- RFC 2580 or any update thereof
    SnmpAdminString
      FROM SNMP-FRAMEWORK-MIB    -- RFC 3411 or any update thereof
    snmpTargetParamsName, snmpTargetAddrName
      FROM SNMP-TARGET-MIB       -- RFC 3413 or any update thereof
    ;

snmpTlstmMIB MODULE-IDENTITY
    LAST-UPDATED "202311080000Z"

    ORGANIZATION "Operations and Management Area Working Group
                  <mailto:opsawg@ietf.org>"
    CONTACT-INFO
            "Author: Kenneth Vaughn
                     <mailto:kvaughn@trevilon.com>"
    DESCRIPTION
       "This is the MIB module for the TLS Transport Model
        (TLSTM).

        Copyright (c) 2023 IETF Trust and the persons identified
        as authors of the code.  All rights reserved.

        Redistribution and use in source and binary forms,
        with or without modification, is permitted pursuant
        to, and subject to the license terms contained in,
        the Revised BSD License set forth in Section 4.c
        of the IETF Trust's Legal Provisions Relating to IETF
        Documents (https://trustee.ietf.org/license-info).

        The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL',
        'SHALL NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED',
        'NOT RECOMMENDED', 'MAY', and 'OPTIONAL' in this document
        are to be interpreted as described in BCP 14 (RFC 2119)
        (RFC 8174) when, and only when, they appear in all
        capitals, as shown here."

        REVISION    "202311080000Z"
        DESCRIPTION
           "This version of this MIB module is part of
            RFC 9456; see the RFC itself for full legal
            notices.  This version does the following:

               1) Updates the definition of SnmpTLSFingerprint
                  to clarify the registry used for the one-octet
                  hash algorithm identifier.

               2) Capitalizes key words in conformance with
                  BCP 14.

               3) Replaces 'may not' with 'MUST NOT' to clarify
                  intent in several locations.

               4) Replaces 'may not' with a clarification within
                  the definition of SnmpTLSAddress.

               5) Applies cosmetic grammar improvements and
                  reformatting causing whitespace changes."

       REVISION     "201107190000Z"
       DESCRIPTION
          "This version of this MIB module is part of
           RFC 6353; see the RFC itself for full legal
           notices.  The only change was to introduce
           new wording to reflect required changes for
           Internationalized Domain Names for Applications
           (IDNA) addresses in the SnmpTLSAddress textual
           convention (TC)."

       REVISION     "201005070000Z"
       DESCRIPTION
          "This version of this MIB module is part of
           RFC 5953; see the RFC itself for full legal
           notices."
    ::= { mib-2 198 }

-- ************************************************
-- subtrees of the SNMP-TLS-TM-MIB
-- ************************************************

snmpTlstmNotifications OBJECT IDENTIFIER ::= { snmpTlstmMIB 0 }
snmpTlstmIdentities    OBJECT IDENTIFIER ::= { snmpTlstmMIB 1 }
snmpTlstmObjects       OBJECT IDENTIFIER ::= { snmpTlstmMIB 2 }
snmpTlstmConformance   OBJECT IDENTIFIER ::= { snmpTlstmMIB 3 }
snmpTlstmHashAlgorithms OBJECT-IDENTITY
    STATUS        current
    DESCRIPTION
       "A node used to register hashing algorithm identifiers
        recorded in the IANA 'SNMP-TLSTM HashAlgorithms' registry."
    ::= { snmpTlstmMIB 4 }

-- ************************************************
-- snmpTlstmObjects - Objects
-- ************************************************

snmpTLSTCPDomain OBJECT-IDENTITY
    STATUS      current
    DESCRIPTION
       "The OBJECT IDENTIFIER representing the TDomain for the
        SNMP over TLS via TCP transport domain.  The
        corresponding transport address is of type SnmpTLSAddress.

        The securityName prefix to be associated with the
        snmpTLSTCPDomain is 'tls'.  This prefix MAY be used by
        security models or other components to identify which secure
        transport infrastructure authenticated a securityName."
    REFERENCE
      "TDomain, as defined in RFC 2579: Textual Conventions
       for SMIv2"
    ::= { snmpDomains 8 }

snmpDTLSUDPDomain OBJECT-IDENTITY
    STATUS      current
    DESCRIPTION
       "The OBJECT IDENTIFIER representing the TDomain for the
        SNMP over DTLS via UDP transport domain.  The
        corresponding transport address is of type SnmpTLSAddress.

        The securityName prefix to be associated with the
        snmpDTLSUDPDomain is 'dtls'.  This prefix MAY be used by
        security models or other components to identify which secure
        transport infrastructure authenticated a securityName."
    REFERENCE
      "TDomain, as defined in RFC 2579: Textual Conventions
       for SMIv2"
    ::= { snmpDomains 9 }

SnmpTLSAddress ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "1a"
    STATUS       current
    DESCRIPTION
       "Represents an IPv4 address, an IPv6 address, or an
        ASCII-encoded host name and port number.

        An IPv4 address MUST be in dotted decimal format followed
        by a colon ':' (ASCII character 0x3A) and a decimal
        port number in ASCII.

        An IPv6 address MUST be a colon-separated format (as
        described in RFC 5952), surrounded by square brackets
        ('[', ASCII character 0x5B, and ']', ASCII character
        0x5D), followed by a colon ':' (ASCII character 0x3A)
        and a decimal port number in ASCII.

        A host name MUST be in ASCII (as per RFC 1123);
        internationalized host names MUST be encoded as A-labels as
        specified in RFC 5890.  The host name is followed by a
        colon ':' (ASCII character 0x3A) and a decimal port
        number in ASCII.  The name SHOULD be fully qualified
        whenever possible.

        Values of this textual convention are not guaranteed to be
        directly usable as transport-layer addressing information,
        potentially requiring additional processing, such as
        run-time resolution.  As such, applications that write
        them MUST be prepared for handling errors if such values
        are not supported or cannot be resolved (if resolution
        occurs at the time of the management operation).

        The DESCRIPTION clause of TransportAddress objects that
        may have SnmpTLSAddress values MUST fully describe how
        (and when) such names are to be resolved to IP addresses
        and vice versa.

        This textual convention SHOULD NOT be used directly in
        object definitions, since it restricts addresses to a
        specific format.  However, if it is used, it MAY be used
        either on its own or in conjunction with
        TransportAddressType or TransportDomain as a pair.

        When this textual convention is used as a syntax of an
        index object, there may be issues with the limit of 128
        sub-identifiers specified in SMIv2 (STD 58).  It is
        RECOMMENDED that all MIB documents using this textual
        convention make explicit any limitations on index
        component lengths that management software MUST observe.
        This MAY be done by either 1) including SIZE constraints
        on the index components or 2) specifying applicable
        constraints in the conceptual row's DESCRIPTION clause or
        in the surrounding documentation."
    REFERENCE
      "RFC 1123: Requirements for Internet Hosts - Application and
                 Support
       RFC 5890: Internationalized Domain Names for Applications
                 (IDNA): Definitions and Document Framework
       RFC 5952: A Recommendation for IPv6 Address Text
                 Representation"
    SYNTAX       OCTET STRING (SIZE (1..255))

SnmpTLSFingerprint ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "1x:1x"
    STATUS       current
    DESCRIPTION
       "A fingerprint value that can be used to uniquely reference
        other data of potentially arbitrary length.

        An SnmpTLSFingerprint value is composed of a one-octet
        hashing algorithm identifier followed by the fingerprint
        value.  The one-octet identifier value encoded is taken
        from the IANA 'SNMP-TLSTM HashAlgorithms' registry.  The
        remaining octets of the SnmpTLSFingerprint value are
        filled using the results of the hashing algorithm.

        Historically, the one-octet hashing algorithm identifier
        was based on the IANA 'TLS HashAlgorithm' registry
        (RFC 5246); however, this registry is no longer in use for
        TLS 1.3 and above and is not expected to have any new
        registrations added to it.  To allow the fingerprint
        algorithm to support additional hashing algorithms that
        might be used by later versions of (D)TLS, the octet value
        encoded is now taken from the IANA
        'SNMP-TLSTM HashAlgorithms' registry.  The initial values
        within this registry are identical to the values in the
        'TLS HashAlgorithm' registry but can be extended to
        support new hashing algorithms as needed.

        This textual convention allows for a zero-length (blank)
        SnmpTLSFingerprint value for use in tables where the
        fingerprint value MAY be optional.  MIB definitions or
        implementations MAY refuse to accept a zero-length value
        as appropriate."
    REFERENCE
      "RFC 5246: The Transport Layer Security (TLS) Protocol
                 Version 1.2
       https://www.iana.org/assignments/smi-numbers/"
    SYNTAX OCTET STRING (SIZE (0..255))

-- Identities for use in the snmpTlstmCertToTSNTable

snmpTlstmCertToTSNMIdentities OBJECT IDENTIFIER ::=
                              { snmpTlstmIdentities 1 }

snmpTlstmCertSpecified OBJECT-IDENTITY
    STATUS        current
    DESCRIPTION
       "Directly specifies the tmSecurityName to be used for this
        certificate.  The value of the tmSecurityName to use is
        specified in the 'snmpTlstmCertToTSNData' column.  The
        'snmpTlstmCertToTSNData' column MUST contain a
        non-zero-length SnmpAdminString-compliant value, or the
        mapping described in this row MUST be considered a
        failure."
    ::= { snmpTlstmCertToTSNMIdentities 1 }

snmpTlstmCertSANRFC822Name OBJECT-IDENTITY
    STATUS        current
    DESCRIPTION
       "Maps a subjectAltName's rfc822Name to a tmSecurityName.
        The local-part of the rfc822Name is passed unaltered, but
        the domain of the name MUST be passed in lowercase.
        This mapping results in a 1:1 correspondence between
        equivalent subjectAltName rfc822Name values and
        tmSecurityName values, except that the domain of the
        name MUST be passed in lowercase.

        Example rfc822Name field:  FooBar@Example.COM is mapped to
        tmSecurityName: FooBar@example.com."
    ::= { snmpTlstmCertToTSNMIdentities 2 }

snmpTlstmCertSANDNSName OBJECT-IDENTITY
    STATUS        current
    DESCRIPTION
       "Maps a subjectAltName's dNSName to a tmSecurityName after
        first converting it to all lowercase (RFC 5280 does not
        specify converting to lowercase, so this involves an extra
        step).  This mapping results in a 1:1 correspondence
        between subjectAltName dNSName values and the
        tmSecurityName values."
    REFERENCE
      "RFC 5280: Internet X.509 Public Key Infrastructure
                 Certificate and Certificate Revocation
                 List (CRL) Profile"
    ::= { snmpTlstmCertToTSNMIdentities 3 }

snmpTlstmCertSANIpAddress OBJECT-IDENTITY
    STATUS        current
    DESCRIPTION
       "Maps a subjectAltName's iPAddress to a tmSecurityName by
        transforming the binary-encoded address as follows:

           1) For IPv4, the value is converted into a
              decimal-dotted quad address (e.g., '192.0.2.1').

           2) For IPv6 addresses, the value is converted into a
              32-character all-lowercase hexadecimal string
              without any colon separators.

        This mapping results in a 1:1 correspondence between
        subjectAltName iPAddress values and the tmSecurityName
        values.

        The resulting length of an encoded IPv6 address is the
        maximum length supported by the View-based Access Control
        Model (VACM).  Using an IPv6 address while the value of
        snmpTsmConfigurationUsePrefix is 'true' (see the
        SNMP-TSM-MIB, as defined in RFC 5591) will result in
        securityName lengths that exceed what the VACM can handle."
       REFERENCE
         "RFC 5591: Transport Security Model for the Simple Network
                    Management Protocol (SNMP)"
    ::= { snmpTlstmCertToTSNMIdentities 4 }

snmpTlstmCertSANAny OBJECT-IDENTITY
    STATUS        current
    DESCRIPTION
       "Maps any of the following fields using the corresponding
        mapping algorithms:

        |------------+----------------------------|
        | Type       | Algorithm                  |
        |------------+----------------------------|
        | rfc822Name | snmpTlstmCertSANRFC822Name |
        | dNSName    | snmpTlstmCertSANDNSName    |
        | iPAddress  | snmpTlstmCertSANIpAddress  |
        |------------+----------------------------|

        The first subjectAltName value contained in the certificate
        that matches any of the above types MUST be used when
        deriving the tmSecurityName.  The mapping algorithm
        specified in the 'Algorithm' column of the corresponding
        row MUST be used to derive the tmSecurityName.

        This mapping results in a 1:1 correspondence between
        subjectAltName values and tmSecurityName values.  The
        three sub-mapping algorithms produced by this combined
        algorithm cannot produce conflicting results between
        themselves."
    ::= { snmpTlstmCertToTSNMIdentities 5 }

snmpTlstmCertCommonName OBJECT-IDENTITY
    STATUS        current
    DESCRIPTION
       "Maps a certificate's CommonName to a tmSecurityName after
        converting it to a UTF-8 encoding.  The usage of
        CommonNames is deprecated, and users are encouraged to use
        subjectAltName mapping methods instead.  This mapping
        results in a 1:1 correspondence between certificate
        CommonName values and tmSecurityName values."
    ::= { snmpTlstmCertToTSNMIdentities 6 }

-- The snmpTlstmSession Group

snmpTlstmSession         OBJECT IDENTIFIER ::= { snmpTlstmObjects 1 }

snmpTlstmSessionOpens  OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
       "The number of times an openSession() request has been
        executed as a (D)TLS client, regardless of whether it
        succeeded or failed."
    ::= { snmpTlstmSession 1 }

snmpTlstmSessionClientCloses  OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
       "The number of times a closeSession() request has been
        executed as a (D)TLS client, regardless of whether it
        succeeded or failed."
    ::= { snmpTlstmSession 2 }

snmpTlstmSessionOpenErrors  OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
       "The number of times an openSession() request failed to
        open a session as a (D)TLS client, for any reason."
    ::= { snmpTlstmSession 3 }

snmpTlstmSessionAccepts  OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
       "The number of times a (D)TLS server has accepted a new
        connection from a client and has received at least one
        SNMP message through it."
    ::= { snmpTlstmSession 4 }

snmpTlstmSessionServerCloses  OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
       "The number of times a closeSession() request has been
        executed as a (D)TLS server, regardless of whether it
        succeeded or failed."
    ::= { snmpTlstmSession 5 }

snmpTlstmSessionNoSessions  OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
       "The number of times an outgoing message was dropped
        because the session associated with the passed
        tmStateReference was no longer (or never) available."
    ::= { snmpTlstmSession 6 }

snmpTlstmSessionInvalidClientCertificates OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
       "The number of times an incoming session was not
        established on a (D)TLS server because the presented
        client certificate was invalid.  Reasons for invalidation
        include, but are not limited to, cryptographic validation
        failures or lack of a suitable mapping row in the
        snmpTlstmCertToTSNTable."
    ::= { snmpTlstmSession 7 }

snmpTlstmSessionUnknownServerCertificate OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
       "The number of times an outgoing session was not
        established on a (D)TLS client because the server
        certificate presented by an SNMP over (D)TLS server was
        invalid because no configured fingerprint or Certification
        Authority (CA) was acceptable to validate it.  This may
        result because there was no entry in the
        snmpTlstmAddrTable or because no path to a known CA could
        be found."
    ::= { snmpTlstmSession 8 }

snmpTlstmSessionInvalidServerCertificates OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
       "The number of times an outgoing session was not
        established on a (D)TLS client because the server
        certificate presented by an SNMP over (D)TLS server could
        not be validated even if the fingerprint or expected
        validation path was known.  That is, a cryptographic
        validation error occurred during certificate validation
        processing.

        Reasons for invalidation include, but are not limited to,
        cryptographic validation failures."
    ::= { snmpTlstmSession 9 }

snmpTlstmSessionInvalidCaches OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
       "The number of outgoing messages dropped because the
        tmStateReference referred to an invalid cache."
    ::= { snmpTlstmSession 10 }

-- Configuration Objects

snmpTlstmConfig          OBJECT IDENTIFIER ::= { snmpTlstmObjects 2 }

-- Certificate mapping

snmpTlstmCertificateMapping OBJECT IDENTIFIER ::=
                            { snmpTlstmConfig 1 }

snmpTlstmCertToTSNCount OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "A count of the number of entries in the
        snmpTlstmCertToTSNTable."
    ::= { snmpTlstmCertificateMapping 1 }

snmpTlstmCertToTSNTableLastChanged OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "The value of sysUpTime.0 when the snmpTlstmCertToTSNTable
        was last modified through any means, or 0 if it has not
        been modified since the command responder was started."
    ::= { snmpTlstmCertificateMapping 2 }

snmpTlstmCertToTSNTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF SnmpTlstmCertToTSNEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "This table is used by a (D)TLS server to map the (D)TLS
        client's presented X.509 certificate to a tmSecurityName.

        On an incoming (D)TLS/SNMP connection, the client's
        presented certificate either MUST be validated based on an
        established trust anchor or MUST directly match a
        fingerprint in this table.  This table does not provide
        any mechanisms for configuring the trust anchors; the
        transfer of any needed trusted certificates for path
        validation is expected to occur through an out-of-band
        transfer.

        Once the certificate has been found acceptable (either via
        path validation or by directly matching a fingerprint in
        this table), this table is consulted to determine the
        appropriate tmSecurityName to identify with the remote
        connection.  This is done by considering each active row
        from this table in prioritized order according to its
        snmpTlstmCertToTSNID value.  Each row's
        snmpTlstmCertToTSNFingerprint value determines whether the
        row is a match for the incoming connection:

           1) If the row's snmpTlstmCertToTSNFingerprint value
              identifies the presented certificate, then consider
              the row as a successful match.

           2) If the row's snmpTlstmCertToTSNFingerprint value
              identifies a locally held copy of a trusted CA
              certificate and that CA certificate was used to
              validate the path to the presented certificate, then
              consider the row as a successful match.

        Once a matching row has been found, the
        snmpTlstmCertToTSNMapType value can be used to determine
        how the tmSecurityName to associate with the session
        should be determined.  See the 'snmpTlstmCertToTSNMapType'
        column's DESCRIPTION clause for details on determining the
        tmSecurityName value.  If it is impossible to determine a
        tmSecurityName from the row's data combined with the data
        presented in the certificate, then additional rows MUST be
        searched to look for another potential match.  If a
        resulting tmSecurityName mapped from a given row is not
        compatible with the needed requirements of a
        tmSecurityName (e.g., the VACM imposes a 32-octet-maximum
        length and the certificate-derived securityName could be
        longer), then it MUST be considered an invalid match and
        additional rows MUST be searched to look for another
        potential match.

        If no matching and valid row can be found, the connection
        MUST be closed and SNMP messages MUST NOT be accepted over
        it.

        Missing values of snmpTlstmCertToTSNID are acceptable, and
        implementations SHOULD continue to the
        next-highest-numbered row.  It is RECOMMENDED that
        administrators skip index values to leave room for the
        insertion of future rows (for example, use values of 10
        and 20 when creating initial rows).

        Users are encouraged to make use of certificates with
        subjectAltName fields that can be used as tmSecurityNames.
        This allows all child certificates of a single root CA
        certificate to include a subjectAltName that maps directly
        to a tmSecurityName via a 1:1 transformation.  However,
        this table is flexible, to allow for situations where
        existing deployed certificate infrastructures do not provide
        adequate subjectAltName values for use as tmSecurityNames.
        Certificates MAY also be mapped to tmSecurityNames using
        the CommonName portion of the Subject field.  However, the
        usage of the CommonName field is deprecated, and thus this
        usage is NOT RECOMMENDED.  Direct mapping from each
        individual certificate fingerprint to a tmSecurityName is
        also possible but requires one entry in the table per
        tmSecurityName and requires more management operations to
        completely configure a device."
    ::= { snmpTlstmCertificateMapping 3 }

snmpTlstmCertToTSNEntry OBJECT-TYPE
    SYNTAX      SnmpTlstmCertToTSNEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "A row in the snmpTlstmCertToTSNTable that specifies a
        mapping for an incoming (D)TLS certificate to a
        tmSecurityName to use for a connection."
    INDEX   { snmpTlstmCertToTSNID }
    ::= { snmpTlstmCertToTSNTable 1 }

SnmpTlstmCertToTSNEntry ::= SEQUENCE {
    snmpTlstmCertToTSNID           Unsigned32,
    snmpTlstmCertToTSNFingerprint  SnmpTLSFingerprint,
    snmpTlstmCertToTSNMapType      AutonomousType,
    snmpTlstmCertToTSNData         OCTET STRING,
    snmpTlstmCertToTSNStorageType  StorageType,
    snmpTlstmCertToTSNRowStatus    RowStatus
}

snmpTlstmCertToTSNID OBJECT-TYPE
    SYNTAX      Unsigned32 (1..4294967295)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "A unique, prioritized index for the given entry.  Lower
        numbers indicate a higher priority."
    ::= { snmpTlstmCertToTSNEntry 1 }

snmpTlstmCertToTSNFingerprint OBJECT-TYPE
    SYNTAX      SnmpTLSFingerprint (SIZE (1..255))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "A cryptographic hash of an X.509 certificate.  The results
        of a successful matching fingerprint to either the trusted
        CA in the certificate validation path or the certificate
        itself is dictated by the 'snmpTlstmCertToTSNMapType'
        column."
    ::= { snmpTlstmCertToTSNEntry 2 }

snmpTlstmCertToTSNMapType OBJECT-TYPE
    SYNTAX      AutonomousType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "Specifies the mapping type for deriving a tmSecurityName
        from a certificate.  Details for mapping of a particular
        type SHALL be specified in the DESCRIPTION clause of the
        OBJECT-IDENTITY that describes the mapping.  If a mapping
        succeeds, it will return a tmSecurityName for use by the
        TLSTM and processing will stop.

        If the resulting mapped value is not compatible with the
        needed requirements of a tmSecurityName (e.g., the VACM
        imposes a 32-octet-maximum length and the
        certificate-derived securityName could be longer), then
        future rows MUST be searched for additional
        snmpTlstmCertToTSNFingerprint matches to look for a
        mapping that succeeds.

        Suitable values for assigning to this object that are
        defined within the SNMP-TLS-TM-MIB can be found in the
        snmpTlstmCertToTSNMIdentities portion of the MIB tree."
    DEFVAL { snmpTlstmCertSpecified }
    ::= { snmpTlstmCertToTSNEntry 3 }

snmpTlstmCertToTSNData OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (0..1024))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "Auxiliary data used as optional configuration information
        for a given mapping specified by the
        'snmpTlstmCertToTSNMapType' column.  Only some mapping
        systems will make use of this column.  The value in this
        column MUST be ignored for any mapping type that does not
        require that data be present in this column."
    DEFVAL { "" }
    ::= { snmpTlstmCertToTSNEntry 4 }

snmpTlstmCertToTSNStorageType OBJECT-TYPE
    SYNTAX       StorageType
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION
       "The storage type for this conceptual row.  Conceptual rows
        having the value 'permanent' need not allow write-access
        to any columnar objects in the row."
    DEFVAL      { nonVolatile }
    ::= { snmpTlstmCertToTSNEntry 5 }

snmpTlstmCertToTSNRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "The status of this conceptual row.  This object MAY be
        used to create or remove rows from this table.

        To create a row in this table, an administrator MUST set
        this object to either createAndGo(4) or createAndWait(5).

        Until instances of all corresponding columns are
        appropriately configured, the value of the corresponding
        instance of the 'snmpTlstmParamsRowStatus' column is
        notReady(3).

        In particular, a newly created row cannot be made active
        until the corresponding 'snmpTlstmCertToTSNFingerprint',
        'snmpTlstmCertToTSNMapType', and 'snmpTlstmCertToTSNData'
        columns have been set.

        The following objects MUST NOT be modified while the
        value of this object is active(1):

           - snmpTlstmCertToTSNFingerprint
           - snmpTlstmCertToTSNMapType
           - snmpTlstmCertToTSNData

        An attempt to set these objects while the value of
        snmpTlstmParamsRowStatus is active(1) will result in
        an inconsistentValue error."
    ::= { snmpTlstmCertToTSNEntry 6 }

-- Maps tmSecurityNames to certificates for use by the
-- SNMP-TARGET-MIB

snmpTlstmParamsCount OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "A count of the number of entries in the
        snmpTlstmParamsTable."
    ::= { snmpTlstmCertificateMapping 4 }

snmpTlstmParamsTableLastChanged OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "The value of sysUpTime.0 when the snmpTlstmParamsTable
        was last modified through any means, or 0 if it has not
        been modified since the command responder was started."
    ::= { snmpTlstmCertificateMapping 5 }

snmpTlstmParamsTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF SnmpTlstmParamsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "This table is used by a (D)TLS client when a (D)TLS
        connection is being set up using an entry in the
        SNMP-TARGET-MIB.  It extends the SNMP-TARGET-MIB's
        snmpTargetParamsTable with a fingerprint of a certificate
        to use when establishing such a (D)TLS connection."
    ::= { snmpTlstmCertificateMapping 6 }

snmpTlstmParamsEntry OBJECT-TYPE
    SYNTAX      SnmpTlstmParamsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "A conceptual row containing a fingerprint hash of a
        locally held certificate for a given
        snmpTargetParamsEntry.  The values in this row SHOULD be
        ignored if the connection that needs to be established, as
        indicated by the SNMP-TARGET-MIB infrastructure, is not a
        certificate-based and (D)TLS-based connection.  The
        connection SHOULD NOT be established if the certificate
        fingerprint stored in this entry does not point to a valid
        locally held certificate or if it points to an unusable
        certificate (such as might happen when the certificate's
        expiration date has been reached)."
    INDEX    { IMPLIED snmpTargetParamsName }
    ::= { snmpTlstmParamsTable 1 }

SnmpTlstmParamsEntry ::= SEQUENCE {
    snmpTlstmParamsClientFingerprint SnmpTLSFingerprint,
    snmpTlstmParamsStorageType       StorageType,
    snmpTlstmParamsRowStatus         RowStatus
}

snmpTlstmParamsClientFingerprint OBJECT-TYPE
    SYNTAX      SnmpTLSFingerprint
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "This object stores the hash of the public portion of a
        locally held X.509 certificate.  The X.509 certificate,
        its public key, and the corresponding private key will be
        used when initiating a (D)TLS connection as a (D)TLS
        client."
    ::= { snmpTlstmParamsEntry 1 }

snmpTlstmParamsStorageType OBJECT-TYPE
    SYNTAX       StorageType
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION
       "The storage type for this conceptual row.  Conceptual rows
        having the value 'permanent' need not allow write-access
        to any columnar objects in the row."
    DEFVAL      { nonVolatile }
    ::= { snmpTlstmParamsEntry 2 }

snmpTlstmParamsRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "The status of this conceptual row.  This object MAY be
        used to create or remove rows from this table.

        To create a row in this table, an administrator MUST set
        this object to either createAndGo(4) or createAndWait(5).

        Until instances of all corresponding columns are
        appropriately configured, the value of the corresponding
        instance of the 'snmpTlstmParamsRowStatus' column is
        notReady(3).

        In particular, a newly created row cannot be made active
        until the corresponding 'snmpTlstmParamsClientFingerprint'
        column has been set.

        The snmpTlstmParamsClientFingerprint object MUST NOT be
        modified while the value of this object is active(1).

        An attempt to set these objects while the value of
        snmpTlstmParamsRowStatus is active(1) will result in
        an inconsistentValue error."
    ::= { snmpTlstmParamsEntry 3 }

snmpTlstmAddrCount OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "A count of the number of entries in the
        snmpTlstmAddrTable."
    ::= { snmpTlstmCertificateMapping 7 }

snmpTlstmAddrTableLastChanged OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "The value of sysUpTime.0 when the snmpTlstmAddrTable
        was last modified through any means, or 0 if it has not
        been modified since the command responder was started."
    ::= { snmpTlstmCertificateMapping 8 }

snmpTlstmAddrTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF SnmpTlstmAddrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "This table is used by a (D)TLS client when a (D)TLS
        connection is being set up using an entry in the
        SNMP-TARGET-MIB.  It extends the SNMP-TARGET-MIB's
        snmpTargetAddrTable so that the client can verify that the
        correct server has been reached.  This verification can
        use either 1) a certificate fingerprint or 2) an
        identity authenticated via certification path validation.

        If there is an active row in this table corresponding to
        the entry in the SNMP-TARGET-MIB that was used to
        establish the connection and the row's
        'snmpTlstmAddrServerFingerprint' column has a non-empty
        value, then the server's presented certificate is compared
        with the snmpTlstmAddrServerFingerprint value (and the
        'snmpTlstmAddrServerIdentity' column is ignored).  If the
        fingerprint matches, the verification has succeeded.  If
        the fingerprint does not match, then the connection MUST
        be closed.

        If the server's presented certificate has passed
        certification path validation (RFC 5280) to a configured
        trust anchor and an active row exists with a zero-length
        snmpTlstmAddrServerFingerprint value, then the
        'snmpTlstmAddrServerIdentity' column contains the expected
        host name.  This expected host name is then compared
        against the server's certificate as follows:

           - Implementations MUST support matching the expected
             host name against a dNSName in the subjectAltName
             extension field and MAY support checking the name
             against the CommonName portion of the subject
             distinguished name.

           - The '*' (ASCII 0x2A) wildcard character is allowed in
             the dNSName of the subjectAltName extension (and in
             CommonName, if used to store the host name), but
             only as the leftmost (least significant) DNS label
             in that value.  This wildcard matches any leftmost
             DNS label in the server name.  That is, the subject
             *.example.com matches the server names a.example.com
             and b.example.com but does not match example.com or
             a.b.example.com.  Implementations MUST support
             wildcards in certificates as specified above but MAY
             provide a configuration option to disable them.

           - If the locally configured name is an
             internationalized domain name, conforming
             implementations MUST convert it to the ASCII
             Compatible Encoding (ACE) format for performing
             comparisons, as specified in Section 7 of RFC 5280.

        If the expected host name fails these conditions, then the
        connection MUST be closed.

        If there is no row in this table corresponding to the
        entry in the SNMP-TARGET-MIB and the server can be
        authorized by another, implementation-dependent means,
        then the connection MAY still proceed."
    ::= { snmpTlstmCertificateMapping 9 }

snmpTlstmAddrEntry OBJECT-TYPE
    SYNTAX      SnmpTlstmAddrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "A conceptual row containing a copy of a certificate's
        fingerprint for a given snmpTargetAddrEntry.  The values
        in this row SHOULD be ignored if the connection that needs
        to be established, as indicated by the SNMP-TARGET-MIB
        infrastructure, is not a (D)TLS-based connection.  If an
        snmpTlstmAddrEntry exists for a given snmpTargetAddrEntry,
        then the presented server certificate MUST match or the
        connection MUST NOT be established.  If a row in this
        table does not exist to match an snmpTargetAddrEntry row,
        then the connection SHOULD still proceed if some other
        certification path validation algorithm (e.g., RFC 5280)
        can be used."
    INDEX    { IMPLIED snmpTargetAddrName }
    ::= { snmpTlstmAddrTable 1 }

SnmpTlstmAddrEntry ::= SEQUENCE {
    snmpTlstmAddrServerFingerprint    SnmpTLSFingerprint,
    snmpTlstmAddrServerIdentity       SnmpAdminString,
    snmpTlstmAddrStorageType          StorageType,
    snmpTlstmAddrRowStatus            RowStatus
}

snmpTlstmAddrServerFingerprint OBJECT-TYPE
    SYNTAX      SnmpTLSFingerprint
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "A cryptographic hash of a public X.509 certificate.  This
        object should store the hash of the public X.509
        certificate that the remote server should present during
        the (D)TLS connection setup.  The fingerprint of the
        presented certificate and this hash value MUST match
        exactly, or the connection MUST NOT be established."
    DEFVAL { "" }
    ::= { snmpTlstmAddrEntry 1 }

snmpTlstmAddrServerIdentity OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "The reference identity to check against the identity
        presented by the remote system."
    DEFVAL { "" }
    ::= { snmpTlstmAddrEntry 2 }

snmpTlstmAddrStorageType OBJECT-TYPE
    SYNTAX       StorageType
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION
       "The storage type for this conceptual row.  Conceptual rows
        having the value 'permanent' need not allow write-access
        to any columnar objects in the row."
    DEFVAL      { nonVolatile }
    ::= { snmpTlstmAddrEntry 3 }

snmpTlstmAddrRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "The status of this conceptual row.  This object may be
        used to create or remove rows from this table.

        To create a row in this table, an administrator MUST set
        this object to either createAndGo(4) or createAndWait(5).

        Until instances of all corresponding columns are
        appropriately configured, the value of the corresponding
        instance of the 'snmpTlstmAddrRowStatus' column is
        notReady(3).

        In particular, a newly created row cannot be made active
        until the corresponding 'snmpTlstmAddrServerFingerprint'
        column has been set.

        Rows MUST NOT be active if the
        'snmpTlstmAddrServerFingerprint' column is blank and the
        snmpTlstmAddrServerIdentity is set to '*', since this
        would insecurely accept any presented certificate.

        The snmpTlstmAddrServerFingerprint object MUST NOT be
        modified while the value of this object is active(1).

        An attempt to set these objects while the value of
        snmpTlstmAddrRowStatus is active(1) will result in
        an inconsistentValue error."
    ::= { snmpTlstmAddrEntry 4 }

-- ************************************************
--  snmpTlstmNotifications - Notifications Information
-- ************************************************

snmpTlstmServerCertificateUnknown NOTIFICATION-TYPE
    OBJECTS { snmpTlstmSessionUnknownServerCertificate }
    STATUS  current
    DESCRIPTION
       "Notification that the server certificate presented by an
        SNMP over (D)TLS server was invalid because no configured
        fingerprint or CA was acceptable to validate it.  This may
        be because there was no entry in the snmpTlstmAddrTable or
        because no path to a known CA could be found.

        To avoid notification loops, this notification MUST NOT be
        sent to servers that themselves have triggered the
        notification."
    ::= { snmpTlstmNotifications 1 }

snmpTlstmServerInvalidCertificate NOTIFICATION-TYPE
    OBJECTS {
        snmpTlstmAddrServerFingerprint,
        snmpTlstmSessionInvalidServerCertificates
    }
    STATUS  current
    DESCRIPTION
       "Notification that the server certificate presented by an
        SNMP over (D)TLS server could not be validated even if the
        fingerprint or expected validation path was known.
        That is, a cryptographic validation error occurred during
        certificate validation processing.

        To avoid notification loops, this notification MUST NOT be
        sent to servers that themselves have triggered the
        notification."
    ::= { snmpTlstmNotifications 2 }

-- ************************************************
-- snmpTlstmCompliances - Conformance Information
-- ************************************************

snmpTlstmCompliances OBJECT IDENTIFIER ::= { snmpTlstmConformance 1 }

snmpTlstmGroups OBJECT IDENTIFIER ::= { snmpTlstmConformance 2 }

-- ************************************************
-- Compliance statements
-- ************************************************

snmpTlstmCompliance MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
       "The compliance statement for SNMP engines that support the
        SNMP-TLS-TM-MIB."
    MODULE
        MANDATORY-GROUPS { snmpTlstmStatsGroup,
                           snmpTlstmIncomingGroup,
                           snmpTlstmOutgoingGroup,
                           snmpTlstmNotificationGroup }
    ::= { snmpTlstmCompliances 1 }

-- ************************************************
-- Units of conformance
-- ************************************************

snmpTlstmStatsGroup OBJECT-GROUP
    OBJECTS {
        snmpTlstmSessionOpens,
        snmpTlstmSessionClientCloses,
        snmpTlstmSessionOpenErrors,
        snmpTlstmSessionAccepts,
        snmpTlstmSessionServerCloses,
        snmpTlstmSessionNoSessions,
        snmpTlstmSessionInvalidClientCertificates,
        snmpTlstmSessionUnknownServerCertificate,
        snmpTlstmSessionInvalidServerCertificates,
        snmpTlstmSessionInvalidCaches
    }
    STATUS      current
    DESCRIPTION
       "A collection of objects for maintaining statistical
        information of an SNMP engine that implements the SNMP
        TLSTM."
    ::= { snmpTlstmGroups 1 }

snmpTlstmIncomingGroup OBJECT-GROUP
    OBJECTS {
        snmpTlstmCertToTSNCount,
        snmpTlstmCertToTSNTableLastChanged,
        snmpTlstmCertToTSNFingerprint,
        snmpTlstmCertToTSNMapType,
        snmpTlstmCertToTSNData,
        snmpTlstmCertToTSNStorageType,
        snmpTlstmCertToTSNRowStatus
    }
    STATUS      current
    DESCRIPTION
       "A collection of objects for maintaining incoming
        connection certificate mappings to tmSecurityNames of an
        SNMP engine that implements the SNMP TLSTM."
    ::= { snmpTlstmGroups 2 }

snmpTlstmOutgoingGroup OBJECT-GROUP
    OBJECTS {
        snmpTlstmParamsCount,
        snmpTlstmParamsTableLastChanged,
        snmpTlstmParamsClientFingerprint,
        snmpTlstmParamsStorageType,
        snmpTlstmParamsRowStatus,
        snmpTlstmAddrCount,
        snmpTlstmAddrTableLastChanged,
        snmpTlstmAddrServerFingerprint,
        snmpTlstmAddrServerIdentity,
        snmpTlstmAddrStorageType,
        snmpTlstmAddrRowStatus
    }
    STATUS      current
    DESCRIPTION
       "A collection of objects for maintaining outgoing
        connection certificates to use when opening connections as
        a result of SNMP-TARGET-MIB settings."
    ::= { snmpTlstmGroups 3 }

snmpTlstmNotificationGroup NOTIFICATION-GROUP
    NOTIFICATIONS {
        snmpTlstmServerCertificateUnknown,
        snmpTlstmServerInvalidCertificate
    }
    STATUS current
    DESCRIPTION
       "Notifications."
    ::= { snmpTlstmGroups 4 }

END