Tech-invite 3GPPspace IETFspace

21 22 23 24 25 26 27 28 29 31 32 33 34 35 36 37 38 4‑5x

Content for TS 38.133 Word version: 18.6.0

1… 3… 4… 5… 6… 7… 8… 9… 10… 12… A… A.4… A.5… A.6… A.7… A.8… A.9… A.10… A.11… A.12… A.13… A.14… A.15… A.16… A.17… A.18… B…

B.1 Conditions for NR RRC_IDLE state mobility B.2 Conditions for UE measurements procedures and performance requirements in RRC_CONNECTED state B.3 RRM Requirements Exceptions B.4 Conditions for V2X B.5 High level test procedure for SAN RRM tests

B (Normative) Conditions for RRM requirements applicability for operating bands p. 6212

B.1 Conditions for NR RRC_IDLE state mobility p. 6212

B.1.1 Introduction p. 6212

B.1.2 Conditions for measurements on NR intra-frequency cells for cell re-selection p. 6212

B.1.3 Conditions for measurements on NR inter-frequency cells for cell re-selection p. 6213

B.1.4 Conditions for measurements on NR intra-frequency cells for cell re-selection for RedCap p. 6213

B.1.5 Conditions for measurements on NR inter-frequency cells for cell re-selection for RedCap p. 6215

B.1.6 Conditions for measurements on NR intra-frequency cells for cell re-selection for satellite access p. 6215

B.1.7 Conditions for measurements on NR inter-frequency cells for cell re-selection for satellite access p. 6216

B.2 Conditions for UE measurements procedures and performance requirements in RRC_CONNECTED state p. 6216

B.2.1 Introduction p. 6216

B.2.1.1 General p. 6216

B.2.1.2 Derivation of Minimum SSB_RP values for FR1 p. 6216

B.2.1.3 Derivation of Minimum SSB_RP values for FR2 p. 6216

B.2.1.3.1 Minimum SSB_RP values for Rx Beam Peak angle of arrival p. 6216

B.2.1.3.2 Minimum SSB_RP values for angle of arrival within Spherical coverage p. 6217

B.2.1.4 Gain to SS-RSRP and CSI-RSRP measurement point for FR1 p. 6218

B.2.1.5 Gain to SS-RSRP and CSI-RSRP measurement point for FR2 p. 6218

B.2.1.5.1 Gain to SS-RSRP and CSI-RSRP measurement point for Rx Beam Peak angle of arrival p. 6218

B.2.1.5.2 Gain to SS-RSRP measurement point for different frequency p. 6219

B.2.1.5.3 Alignment of Rough beam to Rx beam Peak p. 6219

B.2.1.6 Gain to PRS-RSRP measurement point for FR2 p. 6219

B.2.1.6.1 Gain to PRS-RSRP measurement point for Rx Beam Peak angle of arrival p. 6219

B.2.2 Conditions for NR intra-frequency measurements p. 6220

B.2.3 Conditions for NR inter-frequency measurements p. 6221

B.2.4 Conditions for NR L1-RSRP reporting p. 6224

B.2.4.1 Conditions for SSB based L1-RSRP reporting p. 6224

B.2.4.2 Conditions for CSI-RS based L1-RSRP reporting p. 6226

B.2.5 Conditions for RRC connection release with redirection to NR p. 6227

B.2.6 Void

B.2.6.1 Void

B.2.6.2 Void

B.2.7 Conditions for SRS-RSRP measurements p. 6228

B.2.8 Conditions for NR L1-SINR reporting p. 6229

B.2.8.1 Conditions for L1-SINR reporting with CSI-RS based CMR and no dedicated IMR configured p. 6229

B.2.8.2 Conditions for L1-SINR reporting with SSB based CMR and dedicated IMR configured p. 6230

B.2.8.2.1 L1-SINR reporting with SSB based CMR and dedicated ZP-IMR configured p. 6230

B.2.8.2.2 L1-SINR reporting with SSB based CMR and dedicated NZP-IMR configured p. 6230

B.2.8.3 Conditions for L1-SINR reporting with CSI-RS based CMR and dedicated IMR configured p. 6232

B.2.8.3.1 L1-SINR reporting with CSI-RS based CMR and dedicated ZP-IMR configured p. 6232

B.2.8.3.2 L1-SINR reporting with CSI-RS based CMR and dedicated NZP-IMR configured p. 6233

B.2.9 Conditions for NR intra-frequency measurements under CCA p. 6234

B.2.10 Conditions for NR inter-frequency measurements under CCA p. 6234

B.2.11 Conditions for NR L1-RSRP reporting under CCA p. 6234

B.2.11.1 Conditions for SSB based L1-RSRP reporting p. 6234

B.2.12 Conditions for NR CSI-RS based intra-frequency measurements p. 6235

B.2.13 Conditions for NR CSI-RS based inter-frequency measurements p. 6236

B.2.14 Conditions for NR PRS-based measurements p. 6238

B.2.15 Conditions for NR intra-frequency measurements for RedCap p. 6240

B.2.16 Conditions for NR inter-frequency measurements for RedCap p. 6241

B.2.17 Conditions for NR intra-frequency measurements for satellite access p. 6242

B.2.18 Conditions for NR inter-frequency measurements for satellite access p. 6243

B.2.19 Conditions for NR L1-RSRP reporting for satellite access p. 6243

B.2.19.1 Conditions for SSB based L1-RSRP reporting for satellite access p. 6243

B.2.19.2 Conditions for CSI-RS based L1-RSRP reporting for satellite access p. 6243

B.2.20 Conditions for RRC connection release with redirection to NR for satellite access p. 6244

B.3 RRM Requirements Exceptions p. 6244

B.3.1 Introduction p. 6244

B.3.2 Receiver sensitivity relaxation for CA p. 6244

B.3.2.1 Receiver sensitivity relaxation for UE supporting CA in FR1 p. 6244

B.3.2.2 Receiver sensitivity relaxation for UE configured with CA in FR1 p. 6244

B.3.2.2.1 Inter-band carrier aggregation p. 6244

B.3.2.2.2 Reference sensitivity exceptions due to UL harmonic interference for CA p. 6244

B.3.2.2.3 Reference sensitivity exceptions due to intermodulation interference due to 2UL CA p. 6245

B.3.2.3 Receiver sensitivity relaxation for UE supporting CA in FR2 p. 6245

B.3.2.4 Receiver sensitivity relaxation for UE configured with CA in FR2 p. 6245

B.3.2.4.1 Intra-band contiguous carrier aggregation p. 6245

B.3.2.4.2 Intra-band non-contiguous carrier aggregation p. 6245

B.3.3 Receiver sensitivity relaxation for DC p. 6245

B.3.3.1 Receiver sensitivity relaxation for EN-DC p. 6245

B.3.3.2 Receiver sensitivity relaxation for NE-DC p. 6245

B.3.4 Receiver sensitivity relaxation for SUL p. 6245

B.3.4.1 Receiver sensitivity relaxation for UE supporting SUL in FR1 p. 6245

B.3.4.2 Receiver sensitivity relaxation for UE configured with SUL in FR1 p. 6246

B.3.4.2.1 Reference sensitivity exceptions due to UL harmonic interference for SUL p. 6246

B.4 Conditions for V2X p. 6246

B.4.1 Test parameters for GNSS signals p. 6246

B.4.2 Conditions for PSBCH-RSRP Accuracy Requirements p. 6246

B.4.3 Conditions for Selection/Reselection to Intra-frequency SyncRef UE p. 6247

B.4.4 Conditions for L1 SL-RSRP Accuracy Requirements p. 6247

B.4.5 Conditions for PSBCH-RSRP Accuracy Requirements under CCA p. 6247

B.4.6 Conditions for Selection/Reselection to Intra-frequency SyncRef UE under CCA p. 6248

B.4.7 Conditions for L1 SL-RSRP Accuracy Requirements under CCA p. 6248

B.5 High level test procedure for SAN RRM tests p. 6248

$ Change history p. 6250