Content for TS 38.133 Word version: 18.6.0
1…
3…
4…
5…
6…
7…
8…
9…
10…
12…
A…
A.4…
A.5…
A.6…
A.7…
A.8…
A.9…
A.10…
A.11…
A.12…
A.13…
A.14…
A.15…
A.16…
A.17…
A.18…
B…
A.18 E-UTRA standalone tests for NR RRM for RedCap
A.18.1 RRC_IDLE state mobility
A.18.2 RRC_CONNECTED state mobility
A.18.3 Measurement procedure
A.19 NR standalone tests for ATG
A.18 E-UTRA standalone tests for NR RRM for RedCap p. 6039
A.18.1 RRC_IDLE state mobility p. 6039
A.18.2 RRC_CONNECTED state mobility p. 6044
A.18.2.1 Handover p. 6044
A.18.2.2 RRC connection release with redirection p. 6049
A.18.3 Measurement procedure p. 6056
A.18.3.1 E-UTRA - NR Inter-RAT Measurements p. 6056
A.18.3.1.1 NR Inter-RAT event triggered reporting tests for FR1 without SSB time index detection when DRX is not used p. 6056
A.18.3.1.2 NR Inter-RAT event triggered reporting tests for FR1 without SSB time index detection when DRX is used p. 6062
A.18.3.1.3 NR Inter-RAT event triggered reporting tests for FR1 with SSB time index detection when DRX is not used p. 6068
A.18.3.1.4 NR Inter-RAT event triggered reporting tests for FR1 with SSB time index detection when DRX is used p. 6074
A.18.3.1.5 NR Inter-RAT event triggered reporting tests for FR2 without SSB time index detection when DRX is not used p. 6080
A.18.3.1.6 NR Inter-RAT event triggered reporting tests for FR2 without SSB time index detection when DRX is used p. 6083
A.18.3.1.7 NR Inter-RAT event triggered reporting tests for FR2 with SSB time index detection when DRX is not used p. 6086
A.18.3.1.8 NR Inter-RAT event triggered reporting tests for FR2 with SSB time index detection when DRX is used p. 6089
A.19 NR standalone tests for ATG p. 6092
A.19.1 RRC_IDLE state mobility p. 6092
A.19.1.1 Cell reselection to FR1 intra-frequency NR case p. 6092
A.19.1.1.1 Test Purpose and Environment p. 6092
A.19.1.1.2 Test Parameters p. 6092
A.19.1.1.3 Test Requirements p. 6093
A.19.1.2 Cell reselection to FR1 inter-frequency NR case p. 6094
A.19.1.2.1 Test Purpose and Environment p. 6094
A.19.1.2.2 Test Parameters p. 6094
A.19.1.2.3 Test Requirements p. 6097
A.19.1.3 Cell reselection to FR1 inter-frequency NR case for UE configured with hs-ATG-cellReselectionSet-r18 p. 6097
A.19.1.3.1 Test Purpose and Environment p. 6097
A.19.1.3.2 Test Parameters p. 6097
A.19.1.3.3 Test Requirements p. 6101
A.19.2 RRC_CONNECTED state mobility p. 6101
A.19.2.1 Handover p. 6101
A.19.2.1.1 Intra-frequency handover from FR1 to FR1; known target cell p. 6101
A.19.2.1.1.1 Test Purpose and Environment p. 6101
A.19.2.1.1.2 Test Parameters p. 6101
A.19.2.1.1.3 Test Requirements p. 6102
A.19.2.1.2 Inter-frequency handover from FR1 to FR1; unknown target cell p. 6102
A.19.2.1.2.1 Test Purpose and Environment p. 6102
A.19.2.1.2.2 Test Parameters p. 6102
A.19.2.1.2.3 Test Requirements p. 6103
A.19.2.2 Conditional Handover p. 6104
A.19.2.2.1 Intra-frequency distance-based conditional Handover from FR1 to FR1 p. 6104
A.19.2.2.1.1 Test Purpose and Environment p. 6104
A.19.2.2.1.2 Test Parameters p. 6104
A.19.2.2.1.3 Test Requirements p. 6108
A.19.2.2.2 Inter-frequency distance-based conditional Handover from FR1 to FR1 p. 6109
A.19.2.2.2.1 Test Purpose and Environment p. 6109
A.19.2.2.2.2 Test Parameters p. 6109
A.19.2.2.2.3 Test Requirements p. 6113
A.19.2.3 RRC Connection Mobility Control p. 6114
A.19.2.3.1 SA: RRC Re-establishment p. 6114
A.19.2.3.1.1 Intra-frequency RRC Re-establishment in FR1 for ATG p. 6114
A.19.2.3.1.2 Inter-frequency RRC Re-establishment in FR1 with unknown target cell without serving cell timing for ATG p. 6115
A.19.2.3.2 Random Access for ATG UE p. 6118
A.19.2.3.2.1 - p. 6118
A.19.2.3.2.2 - p. 6119
A.19.2.3.2.3 2-step RA type contention based random access test in FR1 for NR standalone p. 6120
A.19.2.3.2.4 2-step RA type non-contention based test in FR1 for NR standalone p. 6121
A.19.2.3.3 - p. 6121
A.19.2.3.3.1 - p. 6121
A.19.3 Timing p. 6123
A.19.3.1 UE transmit timing p. 6123
A.19.3.2 UE timer accuracy p. 6127
A.19.3.3 Timing advance p. 6127
A.19.4 Signalling characteristics p. 6128
A.19.4.1 Radio link Monitoring p. 6128
A.19.4.1.1 Radio Link Monitoring Out-of-sync Test for FR1 PCell configured with SSB-based RLM RS in non-DRX mode p. 6128
A.19.4.1.2 Radio Link Monitoring In-sync Test for FR1 PCell configured with SSB-based RLM RS in non-DRX mode p. 6134
A.19.4.1.3 Radio Link Monitoring Out-of-sync Test for FR1 PCell configured with CSI-RS-based RLM in non-DRX mode p. 6140
A.19.4.1.4 Radio Link Monitoring In-sync Test for FR1 PCell configured with CSI-RS-based RLM in non-DRX mode p. 6146
A.19.4.2 Beam Failure Detection and Link recovery procedures p. 6152
A.19.4.2.1 Beam Failure Detection and Link Recovery Test for FR1 PCell configured with SSB-based BFD and LR in non-DRX mode p. 6152
A.19.4.2.2 Beam Failure Detection and Link Recovery Test for FR1 PCell configured with CSI-RS-based BFD and LR in non-DRX mode p. 6159
A.19.4.3 Active BWP switch p. 6165
A.19.4.3.1 DCI-based and Timer-based Active BWP Switch p. 6165
A.19.4.3.2 RRC-based Active BWP Switch p. 6169
A.19.4.4 UE specific CBW change p. 6174
A.19.4.5 Pathloss reference signal switching delay p. 6179
A.19.5 Measurement procedure p. 6183
A.19.5.1 Intra-frequency Measurements p. 6183
A.19.5.1.1 SA event triggered reporting tests without gap without SSB index reading under non-DRX p. 6183
A.19.5.1.1.1 Test purpose and Environment p. 6183
A.19.5.1.1.2 Test parameters p. 6183
A.19.5.1.1.3 Test Requirements p. 6184
A.19.5.1.2 SA event triggered reporting tests with per-UE gaps under non-DRX p. 6184
A.19.5.1.2.1 Test purpose and Environment p. 6184
A.19.5.1.2.2 Test parameters p. 6184
A.19.5.1.2.3 Test Requirements p. 6184
A.19.5.1.3 SA event triggered reporting tests without gap under non-DRX with SSB index reading p. 6185
A.19.5.1.3.1 Test purpose and Environment p. 6185
A.19.5.1.3.2 Test parameters p. 6185
A.19.5.1.3.3 Test Requirements p. 6185
A.19.5.1.4 SA event triggered reporting tests with per-UE gaps under non-DRX with SSB index reading p. 6186
A.19.5.1.4.1 Test purpose and Environment p. 6186
A.19.5.1.4.2 Test parameters p. 6186
A.19.5.1.4.3 Test Requirements p. 6186
A.19.5.2 Inter-frequency Measurements p. 6187
A.19.5.2.1 - p. 6187
A.19.5.2.1.2 Test parameters p. 6187
A.19.5.2.1.3 Test Requirements p. 6189
A.19.5.2.2.2 Test parameters p. 6189
A.19.5.2.3.2 Test parameters p. 6190
A.19.5.2.3.3 Test Requirements p. 6191
A.19.5.3 L1-RSRP measurement for beam reporting for ATG p. 6191
A.19.5.3.1 SSB based L1-RSRP measurement when DRX is not used p. 6191
A.19.5.3.1.1 Test Purpose and Environment p. 6191
A.19.5.3.1.2 Test parameters p. 6191
A.19.5.3.1.3 Test Requirements p. 6192
A.19.5.3.2 CSI-RS based L1-RSRP measurement when DRX is not used p. 6192
A.19.5.3.2.1 Test Purpose and Environment p. 6192
A.19.5.3.2.2 Test parameters p. 6192
A.19.5.3.2.3 Test Requirements p. 6192
A.19.5.4 L1-SINR measurement for beam reporting for ATG p. 6193
A.19.5.4.1 L1-SINR measurement with CSI-RS based CMR and no dedicated IMR configured when DRX is not used p. 6193
A.19.5.4.1.3 Test Requirements p. 6193
A.19.5.4.2 L1-SINR measurement with SSB based CMR and dedicated IMR when DRX is not used p. 6193
A.19.5.4.2.1 Test Purpose and Environment p. 6193
A.19.5.4.2.2 Test parameters p. 6194
A.19.5.4.2.3 Test Requirements p. 6194
A.19.5.4.3 L1-SINR measurement with CSI-RS based CMR and dedicated IMR configured when DRX is not used p. 6194
A.19.5.4.3.1 Test Purpose and Environment p. 6194
A.19.5.4.3.2 Test parameters p. 6195
A.19.5.4.3.3 Test Requirements p. 6195
A.19.5.5 NR measurements with autonomous gaps for ATG p. 6195
A.19.6 Measurement Performance requirements p. 6196
A.19.6.1 SS-RSRP for ATG UE p. 6196
A.19.6.1.1 SA: intra-frequency case measurement accuracy with FR1 serving cell and FR1 target cell p. 6196
A.19.6.1.1.1 Test Purpose and Environment p. 6196
A.19.6.1.1.2 Test parameters p. 6196
A.19.6.1.1.3 Test Requirements p. 6197
A.19.6.1.2 SA inter-frequency case measurement accuracy with FR1 serving cell and FR1 target cell p. 6197
A.19.6.1.2.1 Test Purpose and Environment p. 6197
A.19.6.1.2.2 Test parameters p. 6197
A.19.6.1.2.3 Test Requirements p. 6198
A.19.6.2 SS-RSRQ for ATG UE p. 6198
A.19.6.2.1 SA: Intra-frequency measurement accuracy with FR1 serving cell and FR1 target cell p. 6198
A.19.6.2.1.1 Test Purpose and Environment p. 6198
A.19.6.2.1.2 Test Parameters p. 6198
A.19.6.2.1.3 Test Requirements p. 6198
A.19.6.2.2 SA Inter-frequency measurement accuracy with FR1 serving cell and FR1 target cell p. 6199
A.19.6.2.2.1 Test Purpose and Environment p. 6199
A.19.6.2.2.2 Test Parameters p. 6199
A.19.6.2.2.3 Test Requirements p. 6199
A.19.6.3 SS-SINR for ATG UE p. 6199
A.19.6.3.1 SA intra-frequency measurement accuracy with FR1 serving cell and FR1 target cell p. 6199
A.19.6.3.1.1 Test Purpose and Environment p. 6199
A.19.6.3.1.2 Test Parameters p. 6200
A.19.6.3.1.3 Test Requirements p. 6200
A.19.6.3.2 SA Inter-frequency measurement accuracy with FR1 serving cell and FR1 target cell p. 6200
A.19.6.3.2.1 Test Purpose and Environment p. 6200
A.19.6.3.2.2 Test Parameters p. 6200
A.19.6.3.2.3 Test Requirements p. 6201
A.19.6.4 L1-RSRP measurement for beam reporting for ATG UE p. 6201
A.19.6.4.1 SSB based L1-RSRP measurement p. 6201
A.19.6.4.1.1 Test Purpose and Environment p. 6201
A.19.6.4.1.2 Test parameters p. 6201
A.19.6.4.1.3 Test Requirements p. 6202
A.19.6.4.2 CSI-RS based L1-RSRP measurement on resource set with repetition off p. 6202
A.19.6.4.2.1 Test Purpose and Environment p. 6202
A.19.6.4.2.2 Test parameters p. 6202
A.19.6.4.2.3 Test Requirements p. 6202
A.19.6.5 L1-SINR measurement for beam reporting based CMR for ATG UE p. 6203
A.19.6.5.1 L1-SINR measurement with CSI-RS based CMR and no dedicated IMR configured and CSI-RS resource set with repetition off p. 6203
A.19.6.5.1.1 Test Purpose and Environment p. 6203
A.19.6.5.1.2 Test parameters p. 6203
A.19.6.5.1.3 Test Requirements p. 6203
A.19.6.5.2 L1-SINR measurement with SSB based CMR and dedicated IMR p. 6204
A.19.6.5.2.1 Test Purpose and Environment p. 6204
A.19.6.5.2.2 Test parameters p. 6204
A.19.6.5.2.3 Test Requirements p. 6204
A.19.6.5.3 L1-SINR measurement with CSI-RS based CMR and dedicated IMR p. 6204
A.19.6.5.3.1 Test Purpose and Environment p. 6204
A.19.6.5.3.2 Test parameters p. 6205
A.19.6.5.3.3 Test Requirements p. 6205
A.19.6.6 CSI-RSRP for ATG UE p. 6205
A.19.6.6.1 SA: intra-frequency case measurement accuracy with FR1 serving cell and FR1 target cell p. 6205
A.19.6.6.1.1 Test Purpose and Environment p. 6205
A.19.6.6.1.2 Test parameters p. 6205
A.19.6.6.1.3 Test Requirements p. 6206
A.19.6.6.2 SA inter-frequency case measurement accuracy with FR1 serving cell and FR1 target cell p. 6206
A.19.6.6.2.1 Test Purpose and Environment p. 6206
A.19.6.6.2.2 Test parameters p. 6206
A.19.6.6.2.3 Test Requirements p. 6207
A.19.6.7 CSI-RSRQ for ATG UE p. 6207
A.19.6.7.1 SA: Intra-frequency measurement accuracy with FR1 serving cell and FR1 target cell p. 6207
A.19.6.7.1.1 Test Purpose and Environment p. 6207
A.19.6.7.1.2 Test Parameters p. 6207
A.19.6.7.1.3 Test Requirements p. 6208
A.19.6.7.2 SA Inter-frequency measurement accuracy with FR1 serving cell and FR1 target cell p. 6208
A.19.6.7.2.1 Test Purpose and Environment p. 6208
A.19.6.7.2.2 Test Parameters p. 6208
A.19.6.7.2.3 Test Requirements p. 6208
A.19.6.8 CSI-SINR for ATG UE p. 6209
A.19.6.8.1 SA intra-frequency measurement accuracy with FR1 serving cell and FR1 target cell p. 6209
A.19.6.8.1.1 Test Purpose and Environment p. 6209
A.19.6.8.1.2 Test Parameters p. 6209
A.19.6.8.1.3 Test Requirements p. 6209
A.19.6.8.2 SA Inter-frequency measurement accuracy with FR1 serving cell and FR1 target cell p. 6209
A.19.6.8.2.1 Test Purpose and Environment p. 6209
A.19.6.8.2.2 Test Parameters p. 6209
A.19.6.8.2.3 Test Requirements p. 6210
