Content for TS 25.133 Word version: 18.0.0
A.6 RRC Connection Control
A.7 Timing and Signalling Characteristics
A.8 UE Measurements Procedures
A.9 Measurement Performance Requirements
A.6 RRC Connection Control |R6| p. 270
A.6.1 RRC Re-establishment delay p. 270
A.6.1.1 Test Purpose and Environment p. 270
A.6.1.1.1 TEST 1 p. 270
A.6.1.1.2 TEST 2 p. 271
A.6.1.2 Test Requirements p. 272
A.6.1.2.1 Test 1 p. 272
A.6.1.2.2 Test 2 p. 272
A.6.2 Random Access p. 273
A.6.2.1 Test Purpose and Environment p. 273
A.6.2.2 Test Requirements p. 274
A.6.2.2.1 Correct behaviour when receiving an ACK p. 274
A.6.2.2.2 Correct behaviour when receiving an NACK p. 274
A.6.2.2.3 Correct behaviour at Time-out p. 275
A.6.2.2.4 Correct behaviour when reaching maximum transmit power p. 275
A.6.2.2.5 Correct behaviour when selecting 2 or 10msec TTI length for Enhanced Uplink in CELL_FACH state and idle mode |R11| p. 275
A.6.3 Void
A.6.4 Transport format combination selection in UE p. 275
A.6.4.1 Test Purpose and Environment p. 275
A.6.4.1.1 Interactive or Background, PS, UL: 64 kbps p. 276
A.6.4.1.2 Interactive or Background, PS, UL: 64 kbps + Conversational / speech, CS, UL: 12.2kbps |R10| p. 277
A.6.4.2 Test Requirements p. 279
A.6.5 Void
A.6.6 E-TFC restriction in UE p. 280
A.7 Timing and Signalling Characteristics |R6| p. 286
A.7.1 UE Transmit Timing p. 286
A.8 UE Measurements Procedures |R6| p. 288
A.8.1 FDD intra frequency measurements p. 288
A.8.1.1 Event triggered reporting in AWGN propagation conditions p. 288
A.8.1.2 Event triggered reporting of multiple neighbours in AWGN propagation condition p. 289
A.8.1.3 Event triggered reporting of two detectable neighbours in AWGN propagation condition p. 291
A.8.1.4 Correct reporting of neighbours in fading propagation condition p. 292
A.8.1.5 Event triggered reporting of multiple neighbour cells in Case 1 fading condition p. 293
A.8.1.6 Event triggered reporting of multiple neighbour cells in Case 3 fading condition p. 295
A.8.1.7 Event triggered reporting in AWGN propagation conditions |R12| p. 296
A.8.2 FDD inter frequency measurements p. 298
A.8.2.1 Correct reporting of neighbours in AWGN propagation condition p. 298
A.8.2.2 Correct reporting of neighbours in Fading propagation condition p. 300
A.8.2.3 Correct reporting of neighbours in fading propagation condition using TGL1=14 p. 301
A.8.2A FDD adjacent frequency measurements |R8| p. 302
A.8.2A.1 Event triggered reporting in AWGN propagation conditions p. 302
A.8.2A.2 Event triggered reporting of two detectable neighbours in AWGN propagation condition p. 303
A.8.2A.3 Correct reporting of neighbours in fading propagation condition p. 304
A.8.2B FDD inter frequency measurements without compressed mode |R10| p. 306
A.8.2C FDD detected set measurements |R10| p. 309
A.8.2C.1 Event triggered reporting of interfrequency detected set measurements with compressed mode p. 309
A.8.2C.2 Event triggered reporting of inter frequency detected set measurements without compressed mode p. 310
A.8.2D Correct reporting of neighbours in AWGN propagation condition with an increased number of carriers and reduced performance group configured |R12| p. 311
A.8.2E Correct reporting of neighbours in AWGN propagation condition (Increased UE carrier monitoring without reduced performance group configured) |R12| p. 314
A.8.3 Void
A.8.4 GSM measurements p. 317
A.8.4.1 Correct reporting of GSM neighbours in AWGN propagation condition p. 317
A.8.5 Combined Interfrequency and GSM measurements p. 321
A.8.5A CSG Proximity Indication Testing Case for UTRAN FDD - FDD Inter frequency |R9| p. 323
A.8.6 E-UTRAN Measurements |R8| p. 326
A.8.6.1 Correct reporting of E-UTRAN FDD neighbours in fading propagation condition in CELL_DCH p. 326
A.8.6.2 Correct reporting of E-UTRAN TDD neighbours in fading propagation condition in CELL_DCH p. 329
A.8.6.3 Correct reporting of E-UTRAN FDD neighbours in fading propagation condition in CELL_FACH |R11| p. 332
A.8.6.4 Correct reporting of E-UTRAN TDD neighbours in fading propagation condition |R11| p. 335
A.8.6.5 Correct reporting of E-UTRAN FDD neighbours in fading propagation condition in CELL_DCH for Increased Carrier Monitoring with reduced performance group configured |R12| p. 338
A.8.6.6 Correct reporting of E-UTRAN TDD neighbours in fading propagation condition in CELL_DCH for Increased Carrier Monitoring with reduced performance group configured |R12| p. 342
A.8.7 Combined Interfrequency and E-UTRAN measurements |R8| p. 347
A.9 Measurement Performance Requirements |R6| p. 353
A.9.1 Measurement Performance for UE p. 353
A.9.1.1 CPICH RSCP p. 353
A.9.1.1.1 Test Purpose and Environment p. 353
A.9.1.1.1.1 Intra frequency test parameters p. 353
A.9.1.1.1.2 Inter frequency test parameters p. 354
A.9.1.1.2 Test Requirements p. 355
A.9.1.2 CPICH Ec/Io p. 355
A.9.1.2.1 Test Purpose and Environment p. 355
A.9.1.2.1.1 Intra frequency test parameters p. 355
A.9.1.2.1.2 Inter frequency test parameters p. 356
A.9.1.2.2 Test Requirements p. 357
A.9.1.3 UTRA Carrier RSSI p. 358
A.9.1.3A GSM Carrier RSSI p. 361
A.9.1.3B Transport channel BLER p. 362
A.9.1.3C UE transmitted power p. 362
A.9.1.3C.1 Test Purpose and Environment p. 362
A.9.1.3C.1.1 Test procedure p. 363
A.9.1.3C.2 Test Requirements p. 363
A.9.1.4 SFN-CFN observed time difference p. 363
A.9.1.4.1 Test Purpose and Environment p. 363
A.9.1.4.1.1 Intra frequency test parameters p. 363
A.9.1.4.1.2 Inter frequency test parameters p. 364
A.9.1.4.2 Test Requirements p. 365
A.9.1.5 SFN-SFN observed time difference p. 365
A.9.1.5.1 SFN-SFN observed time difference type 1 p. 365
A.9.1.5.2 SFN-SFN observed time difference type 2 without IPDL period active p. 366
A.9.1.5.3 SFN-SFN observed time difference type 2 with IPDL period active p. 367
A.9.1.6 UE Rx-Tx time difference p. 368
A.9.1.7 Void
A.9.1.8 Void
A.9.1.9 UE Transmission Power Headroom p. 370
A.9.1.9.1 Test Purpose and Environment p. 370
A.9.1.9.1.1 Test Procedure p. 371
A.9.1.9.2 Test Requirements p. 371
A.9.1.10 E-UTRAN FDD RSRP absolute accuracy (CELL_DCH) |R9| p. 372
A.9.1.11 E-UTRAN TDD RSRP Absolute Accuracy (CELL_DCH) |R9| p. 375
A.9.1.12 E-UTRA FDD RSRQ absolute accuracy (CELL_DCH) |R9| p. 378
A.9.1.13 E-UTRAN TDD RSRQ Absolute Accuracy (CELL_DCH) |R9| p. 381
A.9.1.14 E-UTRAN FDD RSRP Absolute Accuracy for 5 MHz Bandwidth |R11| p. 384
A.9.1.15 E-UTRA FDD RSRQ Absolute Accuracy for 5 MHz Bandwidth |R11| p. 385
A.9.1.16 E-UTRAN FDD RSRP absolute accuracy (CELL_FACH) |R11| p. 387
A.9.1.17 E-UTRAN TDD RSRP Absolute Accuracy (CELL_FACH) |R11| p. 390
A.9.1.18 E-UTRA FDD RSRQ absolute accuracy (CELL_FACH) |R12| p. 392
A.9.1.19 E-UTRAN TDD RSRQ Absolute Accuracy (CELL_FACH) |R12| p. 394
A.9.1.20 E-UTRA FDD WB-RSRQ Absolute Accuracy (CELL_DCH) |R11| p. 396
A.9.1.21 E-UTRA TDD WB-RSRQ Absolute Accuracy (CELL_DCH) |R11| p. 398
