Content for TS 25.133 Word version: 18.0.0
A Test Cases
A.1 Purpose of Annex
A.2 Requirement classification for statistical testing
A.3 RRM test configurations
A.4 Idle Mode
A.5 UTRAN Connected Mode Mobility
...
...
A (Normative) Test Cases p. 145
A.1 Purpose of Annex p. 145
A.2 Requirement classification for statistical testing |R6| p. 145
A.3 RRM test configurations |R6| p. 146
A.4 Idle Mode |R6| p. 147
A.4.1 Void
A.4.2 Cell Re-Selection p. 147
A.4.2.1 Scenario 1: Single carrier case p. 147
A.4.2.2 Scenario 2: Multi carrier case p. 148
A.4.2.3 Idle mode interfrequency reselection with an increased number of carriers |R12| p. 150
A.4.2.4 Scenario 4: Single carrier case with extended DRX |R13| p. 154
A.4.2.5 Scenario 5: Idle mode interfrequency reselection with extended DRX |R16| p. 155
A.4.3 UTRAN to GSM Cell Re-Selection p. 157
A.4.4 FDD/TDD Cell Re-selection p. 161
A.4.4.1 Test Purpose and Environment p. 161
A.4.4.1.1 3,84 Mcps TDD Option p. 161
A.4.4.1.2 1.28 Mcps TDD Option p. 163
A.4.4.2 Test Requirements p. 164
A.4.5 UTRAN to E-UTRA Cell Reselection |R8| p. 165
A.4.5.1 E-UTRA FDD is of higher priority p. 165
A.4.5.2 E-UTRA FDD is of lower priority p. 168
A.4.5.3 RSRQ based reselection when E-UTRA FDD is of higher priority |R11| p. 171
A.4.5.4 E-UTRA FDD is of higher priority (Increased UE carrier monitoring) |R12| p. 174
A.4.5A UTRAN to E-UTRA TDD Cell Reselection with Increased Carrier Monitoring |R12| p. 180
A.5 UTRAN Connected Mode Mobility |R6| p. 184
A.5.1 FDD/FDD Soft Handover p. 184
A.5.1.1 Test Purpose and Environment p. 184
A.5.1.1.1 Test procedure p. 185
A.5.1.2 Test Requirements p. 185
A.5.2 FDD/FDD Hard Handover p. 185
A.5.3 Void
A.5.4 Inter-system Handover from UTRAN FDD to GSM p. 188
A.5.4a Inter-system Handover from UTRAN FDD to E-UTRAN FDD |R8| p. 190
A.5.4b Inter-system Handover from UTRAN FDD to E-UTRAN TDD |R8| p. 193
A.5.4c Inter-system Handover from UTRAN FDD to E-UTRAN FDD; Unknown Target Cell |R8| p. 196
A.5.4d Inter-system Handover from UTRAN FDD to E-UTRAN TDD; Unknown Target Cell |R8| p. 198
A.5.5 Cell Re-selection in CELL_FACH p. 200
A.5.5.1 One frequency present in neighbour list and FACH measurement occasions configured p. 200
A.5.5.1A One frequency present in neighbour list and HS-DSCH DRX configured |R11| p. 202
A.5.5.1B One frequency present in neighbour list and HS-DSCH 2nd DRX configured |R11| p. 204
A.5.5.1C One frequency present in neighbour list and FACH measurement occasions configured, secondary BCH in use |R12| p. 206
A.5.5.2 Two frequencies present in the neighbour list and FACH measurement occasions configured p. 208
A.5.5.2A Two frequencies present in the neighbour list and HS-DSCH DRX configured (Absolute priority levels not configured) |R11| p. 210
A.5.5.2B Two frequencies present in the neighbour list and HS-DSCH DRX configured (Absolute priority levels configured) |R11| p. 212
A.5.5.2C Two frequencies present in the neighbour list and HS-DSCH 2nd DRX configured (Absolute priority levels not configured) |R11| p. 214
A.5.5.2D Two frequencies present in the neighbour list and HS-DSCH 2nd DRX configured (Absolute priority levels configured) |R11| p. 216
A.5.5.2E Five frequencies present in the neighbour list and FACH measurement occasions configured for Increased Carrier Monitoring |R12| p. 218
A.5.5.3 Cell Reselection to GSM p. 222
A.5.5.3A Cell Reselection to GSM in DRX |R12| p. 224
A.5.5.4 Cell Reselection during an MBMS session, two frequencies present in neighbour list p. 227
A.5.5.5 UTRAN to E-UTRA Cell Reselection |R11| p. 230
A.5.5.5.1 Reselection to E-UTRA FDD when HS-DSCH DRX is configured (E-UTRA has higher priority) p. 230
A.5.5.5.2 Reselection to E-UTRA FDD when HS-DSCH DRX is configured (E-UTRA has lower priority) p. 233
A.5.5.5.3 Reselection to E-UTRA FDD when HS-DSCH 2nd DRX is configured (E-UTRA has higher priority) p. 236
A.5.5.5.4 Reselection to E-UTRA TDD when HS-DSCH DRX is configured (E-UTRA has higher priority) p. 239
A.5.5.5.5 Reselection to E-UTRA TDD when HS-DSCH DRX is configured (E-UTRA has lower priority) p. 242
A.5.5.5.6 Reselection to E-UTRA TDD when HS-DSCH 2nd DRX is configured configured (E-UTRA has higher priority) p. 245
A.5.5.5.7 Reselection to E-UTRA FDD with FACH measurement occasions configured p. 248
A.5.5.5.8 Reselection to E-UTRA TDD with FACH measurement occasions configured p. 251
A.5.6 Cell Re-selection in CELL_PCH p. 254
A.5.6.1 One frequency present in the neighbour list p. 254
A.5.6.2 Two frequencies present in the neighbour list p. 256
A.5.6.3 Cell re-selection during an MBMS session, one UTRAN inter-frequency and 2 GSM cells present in the neighbour list p. 257
A.5.7 Cell Re-selection in URA_PCH p. 260
A.5.7.1 One frequency present in the neighbour list p. 260
A.5.7.2 Two frequencies present in the neighbour list p. 261
A.5.8 Serving HS-DSCH cell change p. 263
A.5.8.1 Test Purpose and Environment p. 263
A.5.8.1.1 Test procedure p. 264
A.5.8.2 Test Requirements p. 264
A.5.9 Enhanced Serving HS-DSCH cell change |R8| p. 264
A.5.9.1 Test Purpose and Environment p. 264
A.5.9.1.1 Test procedure p. 266
A.5.9.2 Test Requirements p. 266
A.5.10 Intrafrequency System information acquisition for CSG cell |R9| p. 266
A.5.11 Interfrequency System information acquisition for CSG cell |R9| p. 268
