Content for TS 25.133 Word version: 18.0.0
9 Measurements Performance Requirements p. 112
9.1 Measurement Performance for UE p. 112
9.1.1 CPICH RSCP p. 113
9.1.1.1 Intra frequency measurements accuracy p. 113
9.1.1.2 Inter frequency measurement accuracy p. 114
9.1.1.3 CPICH RSCP measurement report mapping p. 114
9.1.2 CPICH Ec/Io p. 115
9.1.2.1 Intra frequency measurements accuracy p. 115
9.1.2.2 Inter frequency measurement accuracy p. 116
9.1.2.3 CPICH Ec/Io measurement report mapping p. 117
9.1.3 UTRA Carrier RSSI p. 117
9.1.3.1 Absolute accuracy requirement p. 118
9.1.3.2 Relative accuracy requirement p. 118
9.1.3.3 UTRA Carrier RSSI measurement report mapping p. 118
9.1.4 GSM carrier RSSI p. 119
9.1.4a E-UTRAN RSRP |R8| p. 119
9.1.4b E-UTRAN RSRQ |R8| p. 119
9.1.4c E-UTRAN WB-RSRQ |R11| p. 120
9.1.5 Transport channel BLER p. 120
9.1.5.1 BLER measurement requirement p. 120
9.1.5.2 Transport channel BLER measurement report mapping p. 120
9.1.6 UE transmitted power p. 120
9.1.7 SFN-CFN observed time difference p. 121
9.1.7.1 Intra frequency measurement requirement p. 121
9.1.7.2 Inter frequency measurement requirement p. 122
9.1.7.3 SFN-CFN observed time difference measurement report mapping p. 123
9.1.8 SFN-SFN observed time difference p. 123
9.1.8.1 SFN-SFN observed time difference type 1 p. 123
9.1.8.1.1 Measurement requirement p. 123
9.1.8.1.2 SFN-SFN observed time difference type 1 measurement report mapping p. 124
9.1.8.2 SFN-SFN observed time difference type 2 p. 124
9.1.8.2.1 Intra frequency measurement requirement accuracy without IPDL period active p. 124
9.1.8.2.2 Intra frequency measurement requirement accuracy with IPDL period active p. 125
9.1.8.2.3 Inter frequency measurement requirement accuracy p. 126
9.1.8.2.4 SFN-SFN observed time difference type 2 measurement report mapping p. 126
9.1.9 UE Rx-Tx time difference p. 126
9.1.9.1 UE Rx-Tx time difference type 1 p. 126
9.1.9.1.1 Measurement requirement p. 127
9.1.9.1.2 UE Rx-Tx time difference type 1 measurement report mapping p. 127
9.1.9.2 UE Rx-Tx time difference type 2 p. 127
9.1.10 Void
9.1.11 P-CCPCH RSCP p. 128
9.1.11.1 Absolute accuracy requirements p. 128
9.1.11.2 P-CCPCH RSCP measurement report mapping p. 129
9.1.12 UE GPS Timing of Cell Frames for UE positioning p. 129
9.1.13 UE transmission power headroom |R6| p. 130
9.1.13.1 Delay requirement p. 130
9.1.13.2 Measurement period requirement p. 130
9.1.13.3 UE transmission power headroom measurement report mapping p. 130
9.1.13.4 UE transmission power headroom measurement report accuracy p. 131
9.1.14 IEEE 802.11 Measurements |R12| p. 132
9.1.14.1 Introduction p. 132
9.1.14.2 IEEE 802.11 Beacon RSSI p. 132
9.2 Measurements Performance for UTRAN p. 132
9.2.1 Received total wideband power p. 133
9.2.1.1 Absolute accuracy requirement p. 133
9.2.1.2 Relative accuracy requirement p. 133
9.2.1.3 Received total wideband power measurement report mapping p. 133
9.2.2 SIR p. 134
9.2.3 SIRerror p. 134
9.2.4 Transmitted carrier power p. 135
9.2.4.1 Accuracy requirement p. 135
9.2.4.2 Transmitted carrier power measurement report mapping p. 135
9.2.5 Transmitted code power p. 135
9.2.5.1 Absolute accuracy requirement p. 135
9.2.5.2 Relative accuracy requirement p. 136
9.2.5.3 Transmitted code power measurement report mapping p. 136
9.2.6 Void
9.2.7 Physical channel BER p. 136
9.2.8 Round trip time p. 137
9.2.8.1 Absolute accuracy requirement p. 137
9.2.8.1.1 Minimum requirement |R7| p. 137
9.2.8.1.2 Requirement for extended round trip time |R7| p. 137
9.2.8.2 Round trip time measurement report mapping p. 137
9.2.9 Transport Channel BER p. 138
9.2.10 UTRAN GPS Timing of Cell Frames for UE positioning p. 139
9.2.10.1 Accuracy requirement p. 139
9.2.10.2 UTRAN GPS timing of Cell Frames for UE positioning measurement report mapping |R4| p. 139
9.2.11 PRACH Propagation delay p. 140
9.2.11.1 Accuracy requirement p. 140
9.2.11.2 PRACH Propagation delay measurement report mapping p. 140
9.2.12 Acknowledged PRACH preambles p. 141
9.2.13 Void
9.2.14 Void
9.2.15 SFN-SFN observed time difference |R4| p. 141
9.2.15.1 Accuracy requirement p. 141
9.2.15.1.1 Accuracy requirement without IPDL p. 141
9.2.15.1.2 Accuracy requirement with IPDL p. 142
9.2.15.2 SFN-SFN observed time difference measurement report mapping p. 142
9.2.16 Transmitted carrier power of all codes not used for HS-PDSCH, HS-SCCH, E-AGCH, E-RGCH or E-HICH transmission |R5| p. 142
9.2.16.1 Accuracy requirement p. 142
9.2.16.2 Measurement report mapping for transmitted carrier power of all codes not used for HS-PDSCH, HS-SCCH, E-AGCH, E-RGCH or E-HICH transmission p. 143
9.2.17 DL Transmission Branch Load |R6| p. 143
9.2.17.1 Accuracy requirement p. 143
9.2.17.2 DL Transmission Branch Load measurement report mapping p. 143
9.2.18 Received scheduled E-DCH power share (RSEPS) |R7| p. 144
