Tech-invite  3GPPspace  IETFspace
21  22  23  24  25  26  27  28  29  31  32  33  34  35  36  37  38  4‑5x

Content for  TS 24.502  Word version:  19.0.0

Top   Top   Up   Prev   Next
1…   4…   5…   5.3B…   6…   7…   7.2.5…   7.3…   7.3A…   7.4…   7.6…   7.9…   7.10…   8…   9…   9.3…   9.3.2…   9.3.2.2.3…   9.3.3… 
9.3.2.2.3 EAP-Request/5G-NAS message  9.3.2.2.4 EAP-Response/5G-Stop message  9.3.2.2.5 EAP-Request/5G-Notification message  9.3.2.2.6 EAP-Response/5G-Notification message 

 

9.3.2.2.3  EAP-Request/5G-NAS message  p. 103
EAP-Request/5G-NAS message is coded as specified in Figure 9.3.2.2.3-1and Table 9.3.2.2.3-1.
Reproduction of 3GPP TS 24.502, Fig. 9.3.2.2.3-1: EAP-Request/5G-NAS message
Figure 9.3.2.2.3-1: EAP-Request/5G-NAS message
Up
Code field is set to 1 (decimal) as specified in Section 4.1 of RFC 3748 and indicates request.
Identifier field is set as specified in Section 4.1 of RFC 3748.
Length field is set as specified in Section 4.1 of RFC 3748 and indicates the length of the EAP-Request/5G-NAS message in octets.
Type field is set to 254 (decimal) as specified in Section 5.7 of RFC 3748 and indicates the expanded type.
Vendor-Id field is set to the 3GPP Vendor-Id of 10415 (decimal) registered with IANA under the SMI Private Enterprise Code registry.
Vendor-Type field is set to EAP-5G method identifier of 3 (decimal) as specified in TS 33.402 Annex C.
Message-Id field is set to 5G-NAS-Id of 2 (decimal).
Spare field consists of spare bits.
NAS-PDU length field indicates the length of NAS-PDU field in octets.
NAS-PDU field contains a NAS message from the AMF as specified TS 24.501.
Extensions field is an optional field and consists of spare bits.
Up
9.3.2.2.4  EAP-Response/5G-Stop message  p. 104
EAP-Response/5G-Stop message is coded as specified in Figure 9.3.2.2.4-1 and Table 9.3.2.2.4-1.
Reproduction of 3GPP TS 24.502, Fig. 9.3.2.2.4-1: EAP-Response/5G-Stop message
Figure 9.3.2.2.4-1: EAP-Response/5G-Stop message
Up
Code field is set to 2 (decimal) as specified in Section 4.1 of RFC 3748 and indicates response.
Identifier field is set as specified in Section 4.1 of RFC 3748.
Length field is set as specified in Section 4.1 of RFC 3748 and indicates the length of the EAP-Response/5G-Stop message in octets.
Type field is set to 254 (decimal) as specified in Section 5.7 of RFC 3748 and indicates the expanded type.
Vendor-Id field is set to the 3GPP Vendor-Id of 10415 (decimal) registered with IANA under the SMI Private Enterprise Code registry.
Vendor-Type field is set to EAP-5G method identifier of 3 (decimal) as specified in TS 33.402 Annex C.
Message-Id field is set to 5G-Stop-Id of 4 (decimal).
Spare field consists of spare bits.
Extensions field is an optional field and consists of spare bits.
Up
9.3.2.2.5  EAP-Request/5G-Notification message |R16|  p. 105
EAP-Request/5G-Notification message is coded as specified in Figure 9.3.2.2.5-1 and Table 9.3.2.2.5-1.
Reproduction of 3GPP TS 24.502, Fig. 9.3.2.2.5-1: EAP-Request/5G-Notification message
Figure 9.3.2.2.5-1: EAP-Request/5G-Notification message
Up
Code field is set to 1 (decimal) as specified in Section 4.1 of RFC 3748 and indicates request.
Identifier field is set as specified in Section 4.1 of RFC 3748.
Length field is set as specified in Section 4.1 of RFC 3748 and indicates the length of the EAP-Request/5G-Notification message in octets.
Type field is set to 254 (decimal) as specified in Section 5.7 of RFC 3748 and indicates the expanded type.
Vendor-Id field is set to the 3GPP Vendor-Id of 10415 (decimal) registered with IANA under the SMI Private Enterprise Code registry.
Vendor-Type field is set to EAP-5G method identifier of 3 (decimal) as specified in TS 33.402 Annex C.
Message-Id field is set to 5G-Notification-Id of 3 (decimal).
Spare field consists of spare bits.
AN-parameters length indicates the length of the AN-parameters field in octets.
AN-Parameters field is coded according to Figure 9.3.2.2.5-2 and Table 9.3.2.2.5-2.
Extensions field is an optional field and consists of spare bits.
Reproduction of 3GPP TS 24.502, Fig. 9.3.2.2.5-2: AN-parameters field
Figure 9.3.2.2.5-2: AN-parameters field
Up
Each AN-parameter field is coded according to Figure 9.3.2.2.5-3 and Table 9.3.2.2.5-3.
Reproduction of 3GPP TS 24.502, Fig. 9.3.2.2.5-3: AN-parameter field
Figure 9.3.2.2.5-3: AN-parameter field
Up
The AN-parameter length field indicates the length of the AN-parameter value field.
The AN-parameter type field indicates the type of the AN-parameter value field. Sending entity shall not set the AN-parameter type field to a spare value. Receiving entity shall ignore any AN-parameter field with the AN-parameter type field set to a spare value. The following AN-parameter type field values are specified:
  • 01H (TNGF IPv4 contact info);
  • 02H (TNGF IPv6 contact info);
All other values of the AN-parameter type field are spare. Receiving entity shall ignore an AN-parameter field with the AN-parameter type field set to a spare value.
When the AN-parameter type field indicates the TNGF IPv4 contact info, the AN-parameter value field is coded as value part (as specified in TS 24.007 for type 3 information element) of TNGF IPv4 contact info information element as specified in clause 9.2.5.
When the AN-parameter type field indicates the TNGF IPv6 contact info, the AN-parameter value field is coded as value part (as specified in TS 24.007 for type 3 information element) of TNGF IPv6 contact info information element as specified in clause 9.2.6.
Up
9.3.2.2.6  EAP-Response/5G-Notification message |R16|  p. 107
EAP-Response/5G-Notification message is coded as specified in Figure 9.3.2.2.6-1 and Table 9.3.2.2.6-1.
Reproduction of 3GPP TS 24.502, Fig. 9.3.2.2.6-1: EAP-Response/5G-Notification message
Figure 9.3.2.2.6-1: EAP-Response/5G-Notification message
Up
Code field is set to 2 (decimal) as specified in Section 4.1 of RFC 3748 and indicates response.
Identifier field is set as specified in Section 4.1 of RFC 3748.
Length field is set as specified in Section 4.1 of RFC 3748 and indicates the length of the EAP-Response/5G-Notification message in octets.
Type field is set to 254 (decimal) as specified in Section 5.7 of RFC 3748 and indicates the expanded type.
Vendor-Id field is set to the 3GPP Vendor-Id of 10415 (decimal) registered with IANA under the SMI Private Enterprise Code registry.
Vendor-Type field is set to EAP-5G method identifier of 3 (decimal) as specified in TS 33.402 Annex C.
Message-Id field is set to 5G-Notification-Id of 3 (decimal).
Spare field consists of spare bits.
Extensions field is an optional field and consists of spare bits.
Up

Up   Top   ToC