RFC 3546
Transport Layer Security (TLS) Extensions
Network Working Group S. Blake-Wilson Request for Comments: 3546 BCI Updates: 2246 M. Nystrom Category: Standards Track RSA Security D. Hopwood Independent Consultant J. Mikkelsen Transactionware T. Wright Vodafone June 2003 Transport Layer Security (TLS) Extensions Status of this Memo This document specifies an Internet standards track protocol for the Internet community, and requests discussion and suggestions for improvements. Please refer to the current edition of the "Internet Official Protocol Standards" (STD 1) for the standardization state and status of this protocol. Distribution of this memo is unlimited. Copyright Notice Copyright (C) The Internet Society (2003). All Rights Reserved.Abstract
This document describes extensions that may be used to add functionality to Transport Layer Security (TLS). It provides both generic extension mechanisms for the TLS handshake client and server hellos, and specific extensions using these generic mechanisms. The extensions may be used by TLS clients and servers. The extensions are backwards compatible - communication is possible between TLS 1.0 clients that support the extensions and TLS 1.0 servers that do not support the extensions, and vice versa. Conventions used in this Document The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14, RFC 2119 [KEYWORDS].
Table of Contents
1. Introduction ............................................. 2 2. General Extension Mechanisms ............................. 4 2.1. Extended Client Hello ............................... 5 2.2. Extended Server Hello ............................... 5 2.3. Hello Extensions .................................... 6 2.4. Extensions to the handshake protocol ................ 7 3. Specific Extensions ...................................... 8 3.1. Server Name Indication .............................. 8 3.2. Maximum Fragment Length Negotiation ................. 10 3.3. Client Certificate URLs ............................. 11 3.4. Trusted CA Indication ............................... 14 3.5. Truncated HMAC ...................................... 15 3.6. Certificate Status Request........................... 16 4. Error alerts .............................................. 18 5. Procedure for Defining New Extensions...................... 20 6. Security Considerations .................................. 21 6.1. Security of server_name ............................. 21 6.2. Security of max_fragment_length ..................... 21 6.3. Security of client_certificate_url .................. 22 6.4. Security of trusted_ca_keys ......................... 23 6.5. Security of truncated_hmac .......................... 23 6.6. Security of status_request .......................... 24 7. Internationalization Considerations ...................... 24 8. IANA Considerations ...................................... 24 9. Intellectual Property Rights ............................. 26 10. Acknowledgments .......................................... 26 11. Normative References ..................................... 27 12. Informative References ................................... 28 13. Authors' Addresses ....................................... 28 14. Full Copyright Statement ................................. 291. Introduction
This document describes extensions that may be used to add functionality to Transport Layer Security (TLS). It provides both generic extension mechanisms for the TLS handshake client and server hellos, and specific extensions using these generic mechanisms. TLS is now used in an increasing variety of operational environments - many of which were not envisioned when the original design criteria for TLS were determined. The extensions introduced in this document are designed to enable TLS to operate as effectively as possible in new environments like wireless networks.
Wireless environments often suffer from a number of constraints not
commonly present in wired environments. These constraints may
include bandwidth limitations, computational power limitations,
memory limitations, and battery life limitations.
The extensions described here focus on extending the functionality
provided by the TLS protocol message formats. Other issues, such as
the addition of new cipher suites, are deferred.
Specifically, the extensions described in this document are designed
to:
- Allow TLS clients to provide to the TLS server the name of the
server they are contacting. This functionality is desirable to
facilitate secure connections to servers that host multiple
'virtual' servers at a single underlying network address.
- Allow TLS clients and servers to negotiate the maximum fragment
length to be sent. This functionality is desirable as a result of
memory constraints among some clients, and bandwidth constraints
among some access networks.
- Allow TLS clients and servers to negotiate the use of client
certificate URLs. This functionality is desirable in order to
conserve memory on constrained clients.
- Allow TLS clients to indicate to TLS servers which CA root keys
they possess. This functionality is desirable in order to prevent
multiple handshake failures involving TLS clients that are only
able to store a small number of CA root keys due to memory
limitations.
- Allow TLS clients and servers to negotiate the use of truncated
MACs. This functionality is desirable in order to conserve
bandwidth in constrained access networks.
- Allow TLS clients and servers to negotiate that the server sends
the client certificate status information (e.g., an Online
Certificate Status Protocol (OCSP) [OCSP] response) during a TLS
handshake. This functionality is desirable in order to avoid
sending a Certificate Revocation List (CRL) over a constrained
access network and therefore save bandwidth.
In order to support the extensions above, general extension
mechanisms for the client hello message and the server hello message
are introduced.
The extensions described in this document may be used by TLS 1.0
clients and TLS 1.0 servers. The extensions are designed to be
backwards compatible - meaning that TLS 1.0 clients that support the
extensions can talk to TLS 1.0 servers that do not support the
extensions, and vice versa.
Backwards compatibility is primarily achieved via two considerations:
- Clients typically request the use of extensions via the extended
client hello message described in Section 2.1. TLS 1.0 [TLS]
requires servers to accept extended client hello messages, even if
the server does not "understand" the extension.
- For the specific extensions described here, no mandatory server
response is required when clients request extended functionality.
Note however, that although backwards compatibility is supported,
some constrained clients may be forced to reject communications with
servers that do not support the extensions as a result of the limited
capabilities of such clients.
The remainder of this document is organized as follows. Section 2
describes general extension mechanisms for the client hello and
server hello handshake messages. Section 3 describes specific
extensions to TLS 1.0. Section 4 describes new error alerts for use
with the TLS extensions. The final sections of the document address
IPR, security considerations, registration of the application/pkix-
pkipath MIME type, acknowledgements, and references.
2. General Extension Mechanisms
This section presents general extension mechanisms for the TLS
handshake client hello and server hello messages.
These general extension mechanisms are necessary in order to enable
clients and servers to negotiate whether to use specific extensions,
and how to use specific extensions. The extension formats described
are based on [MAILING LIST].
Section 2.1 specifies the extended client hello message format,
Section 2.2 specifies the extended server hello message format, and
Section 2.3 describes the actual extension format used with the
extended client and server hellos.
2.1. Extended Client Hello
Clients MAY request extended functionality from servers by sending the extended client hello message format in place of the client hello message format. The extended client hello message format is: struct { ProtocolVersion client_version; Random random; SessionID session_id; CipherSuite cipher_suites<2..2^16-1>; CompressionMethod compression_methods<1..2^8-1>; Extension client_hello_extension_list<0..2^16-1>; } ClientHello; Here the new "client_hello_extension_list" field contains a list of extensions. The actual "Extension" format is defined in Section 2.3. In the event that a client requests additional functionality using the extended client hello, and this functionality is not supplied by the server, the client MAY abort the handshake. Note that [TLS], Section 7.4.1.2, allows additional information to be added to the client hello message. Thus the use of the extended client hello defined above should not "break" existing TLS 1.0 servers. A server that supports the extensions mechanism MUST accept only client hello messages in either the original or extended ClientHello format, and (as for all other messages) MUST check that the amount of data in the message precisely matches one of these formats; if not then it MUST send a fatal "decode_error" alert. This overrides the "Forward compatibility note" in [TLS].2.2. Extended Server Hello
The extended server hello message format MAY be sent in place of the server hello message when the client has requested extended functionality via the extended client hello message specified in Section 2.1. The extended server hello message format is:
struct {
ProtocolVersion server_version;
Random random;
SessionID session_id;
CipherSuite cipher_suite;
CompressionMethod compression_method;
Extension server_hello_extension_list<0..2^16-1>;
} ServerHello;
Here the new "server_hello_extension_list" field contains a list of
extensions. The actual "Extension" format is defined in Section 2.3.
Note that the extended server hello message is only sent in response
to an extended client hello message. This prevents the possibility
that the extended server hello message could "break" existing TLS 1.0
clients.
2.3. Hello Extensions
The extension format for extended client hellos and extended server
hellos is:
struct {
ExtensionType extension_type;
opaque extension_data<0..2^16-1>;
} Extension;
Here:
- "extension_type" identifies the particular extension type.
- "extension_data" contains information specific to the particular
extension type.
The extension types defined in this document are:
enum {
server_name(0), max_fragment_length(1),
client_certificate_url(2), trusted_ca_keys(3),
truncated_hmac(4), status_request(5), (65535)
} ExtensionType;
Note that for all extension types (including those defined in
future), the extension type MUST NOT appear in the extended server
hello unless the same extension type appeared in the corresponding
client hello. Thus clients MUST abort the handshake if they receive
an extension type in the extended server hello that they did not
request in the associated (extended) client hello.
Nonetheless "server initiated" extensions may be provided in the future within this framework by requiring the client to first send an empty extension to indicate that it supports a particular extension. Also note that when multiple extensions of different types are present in the extended client hello or the extended server hello, the extensions may appear in any order. There MUST NOT be more than one extension of the same type. Finally note that all the extensions defined in this document are relevant only when a session is initiated. However, a client that requests resumption of a session does not in general know whether the server will accept this request, and therefore it SHOULD send an extended client hello if it would normally do so for a new session. If the resumption request is denied, then a new set of extensions will be negotiated as normal. If, on the other hand, the older session is resumed, then the server MUST ignore extensions appearing in the client hello, and send a server hello containing no extensions; in this case the extension functionality negotiated during the original session initiation is applied to the resumed session.2.4. Extensions to the handshake protocol
This document suggests the use of two new handshake messages, "CertificateURL" and "CertificateStatus". These messages are described in Section 3.3 and Section 3.6, respectively. The new handshake message structure therefore becomes: enum { hello_request(0), client_hello(1), server_hello(2), certificate(11), server_key_exchange (12), certificate_request(13), server_hello_done(14), certificate_verify(15), client_key_exchange(16), finished(20), certificate_url(21), certificate_status(22), (255) } HandshakeType;
struct {
HandshakeType msg_type; /* handshake type */
uint24 length; /* bytes in message */
select (HandshakeType) {
case hello_request: HelloRequest;
case client_hello: ClientHello;
case server_hello: ServerHello;
case certificate: Certificate;
case server_key_exchange: ServerKeyExchange;
case certificate_request: CertificateRequest;
case server_hello_done: ServerHelloDone;
case certificate_verify: CertificateVerify;
case client_key_exchange: ClientKeyExchange;
case finished: Finished;
case certificate_url: CertificateURL;
case certificate_status: CertificateStatus;
} body;
} Handshake;
3. Specific Extensions
This section describes the specific TLS extensions specified in this
document.
Note that any messages associated with these extensions that are sent
during the TLS handshake MUST be included in the hash calculations
involved in "Finished" messages.
Section 3.1 describes the extension of TLS to allow a client to
indicate which server it is contacting. Section 3.2 describes the
extension to provide maximum fragment length negotiation. Section
3.3 describes the extension to allow client certificate URLs.
Section 3.4 describes the extension to allow a client to indicate
which CA root keys it possesses. Section 3.5 describes the extension
to allow the use of truncated HMAC. Section 3.6 describes the
extension to support integration of certificate status information
messages into TLS handshakes.
3.1. Server Name Indication
[TLS] does not provide a mechanism for a client to tell a server the
name of the server it is contacting. It may be desirable for clients
to provide this information to facilitate secure connections to
servers that host multiple 'virtual' servers at a single underlying
network address.
In order to provide the server name, clients MAY include an extension
of type "server_name" in the (extended) client hello. The
"extension_data" field of this extension SHALL contain
"ServerNameList" where:
struct {
NameType name_type;
select (name_type) {
case host_name: HostName;
} name;
} ServerName;
enum {
host_name(0), (255)
} NameType;
opaque HostName<1..2^16-1>;
struct {
ServerName server_name_list<1..2^16-1>
} ServerNameList;
Currently the only server names supported are DNS hostnames, however
this does not imply any dependency of TLS on DNS, and other name
types may be added in the future (by an RFC that Updates this
document). TLS MAY treat provided server names as opaque data and
pass the names and types to the application.
"HostName" contains the fully qualified DNS hostname of the server,
as understood by the client. The hostname is represented as a byte
string using UTF-8 encoding [UTF8], without a trailing dot.
If the hostname labels contain only US-ASCII characters, then the
client MUST ensure that labels are separated only by the byte 0x2E,
representing the dot character U+002E (requirement 1 in section 3.1
of [IDNA] notwithstanding). If the server needs to match the HostName
against names that contain non-US-ASCII characters, it MUST perform
the conversion operation described in section 4 of [IDNA], treating
the HostName as a "query string" (i.e. the AllowUnassigned flag MUST
be set). Note that IDNA allows labels to be separated by any of the
Unicode characters U+002E, U+3002, U+FF0E, and U+FF61, therefore
servers MUST accept any of these characters as a label separator. If
the server only needs to match the HostName against names containing
exclusively ASCII characters, it MUST compare ASCII names case-
insensitively.
Literal IPv4 and IPv6 addresses are not permitted in "HostName".
It is RECOMMENDED that clients include an extension of type "server_name" in the client hello whenever they locate a server by a supported name type. A server that receives a client hello containing the "server_name" extension, MAY use the information contained in the extension to guide its selection of an appropriate certificate to return to the client, and/or other aspects of security policy. In this event, the server SHALL include an extension of type "server_name" in the (extended) server hello. The "extension_data" field of this extension SHALL be empty. If the server understood the client hello extension but does not recognize the server name, it SHOULD send an "unrecognized_name" alert (which MAY be fatal). If an application negotiates a server name using an application protocol, then upgrades to TLS, and a server_name extension is sent, then the extension SHOULD contain the same name that was negotiated in the application protocol. If the server_name is established in the TLS session handshake, the client SHOULD NOT attempt to request a different server name at the application layer.3.2. Maximum Fragment Length Negotiation
[TLS] specifies a fixed maximum plaintext fragment length of 2^14 bytes. It may be desirable for constrained clients to negotiate a smaller maximum fragment length due to memory limitations or bandwidth limitations. In order to negotiate smaller maximum fragment lengths, clients MAY include an extension of type "max_fragment_length" in the (extended) client hello. The "extension_data" field of this extension SHALL contain: enum{ 2^9(1), 2^10(2), 2^11(3), 2^12(4), (255) } MaxFragmentLength; whose value is the desired maximum fragment length. The allowed values for this field are: 2^9, 2^10, 2^11, and 2^12.
Servers that receive an extended client hello containing a "max_fragment_length" extension, MAY accept the requested maximum fragment length by including an extension of type "max_fragment_length" in the (extended) server hello. The "extension_data" field of this extension SHALL contain "MaxFragmentLength" whose value is the same as the requested maximum fragment length. If a server receives a maximum fragment length negotiation request for a value other than the allowed values, it MUST abort the handshake with an "illegal_parameter" alert. Similarly, if a client receives a maximum fragment length negotiation response that differs from the length it requested, it MUST also abort the handshake with an "illegal_parameter" alert. Once a maximum fragment length other than 2^14 has been successfully negotiated, the client and server MUST immediately begin fragmenting messages (including handshake messages), to ensure that no fragment larger than the negotiated length is sent. Note that TLS already requires clients and servers to support fragmentation of handshake messages. The negotiated length applies for the duration of the session including session resumptions. The negotiated length limits the input that the record layer may process without fragmentation (that is, the maximum value of TLSPlaintext.length; see [TLS] section 6.2.1). Note that the output of the record layer may be larger. For example, if the negotiated length is 2^9=512, then for currently defined cipher suites (those defined in [TLS], [KERB], and [AESSUITES]), and when null compression is used, the record layer output can be at most 793 bytes: 5 bytes of headers, 512 bytes of application data, 256 bytes of padding, and 20 bytes of MAC. That means that in this event a TLS record layer peer receiving a TLS record layer message larger than 793 bytes may discard the message and send a "record_overflow" alert, without decrypting the message.3.3. Client Certificate URLs
[TLS] specifies that when client authentication is performed, client certificates are sent by clients to servers during the TLS handshake. It may be desirable for constrained clients to send certificate URLs in place of certificates, so that they do not need to store their certificates and can therefore save memory.
In order to negotiate to send certificate URLs to a server, clients
MAY include an extension of type "client_certificate_url" in the
(extended) client hello. The "extension_data" field of this
extension SHALL be empty.
(Note that it is necessary to negotiate use of client certificate
URLs in order to avoid "breaking" existing TLS 1.0 servers.)
Servers that receive an extended client hello containing a
"client_certificate_url" extension, MAY indicate that they are
willing to accept certificate URLs by including an extension of type
"client_certificate_url" in the (extended) server hello. The
"extension_data" field of this extension SHALL be empty.
After negotiation of the use of client certificate URLs has been
successfully completed (by exchanging hellos including
"client_certificate_url" extensions), clients MAY send a
"CertificateURL" message in place of a "Certificate" message:
enum {
individual_certs(0), pkipath(1), (255)
} CertChainType;
enum {
false(0), true(1)
} Boolean;
struct {
CertChainType type;
URLAndOptionalHash url_and_hash_list<1..2^16-1>;
} CertificateURL;
struct {
opaque url<1..2^16-1>;
Boolean hash_present;
select (hash_present) {
case false: struct {};
case true: SHA1Hash;
} hash;
} URLAndOptionalHash;
opaque SHA1Hash[20];
Here "url_and_hash_list" contains a sequence of URLs and optional
hashes.
When X.509 certificates are used, there are two possibilities:
- if CertificateURL.type is "individual_certs", each URL refers to a
single DER-encoded X.509v3 certificate, with the URL for the
client's certificate first, or
- if CertificateURL.type is "pkipath", the list contains a single
URL referring to a DER-encoded certificate chain, using the type
PkiPath described in Section 8.
When any other certificate format is used, the specification that
describes use of that format in TLS should define the encoding format
of certificates or certificate chains, and any constraint on their
ordering.
The hash corresponding to each URL at the client's discretion is
either not present or is the SHA-1 hash of the certificate or
certificate chain (in the case of X.509 certificates, the DER-encoded
certificate or the DER-encoded PkiPath).
Note that when a list of URLs for X.509 certificates is used, the
ordering of URLs is the same as that used in the TLS Certificate
message (see [TLS] Section 7.4.2), but opposite to the order in which
certificates are encoded in PkiPath. In either case, the self-signed
root certificate MAY be omitted from the chain, under the assumption
that the server must already possess it in order to validate it.
Servers receiving "CertificateURL" SHALL attempt to retrieve the
client's certificate chain from the URLs, and then process the
certificate chain as usual. A cached copy of the content of any URL
in the chain MAY be used, provided that a SHA-1 hash is present for
that URL and it matches the hash of the cached copy.
Servers that support this extension MUST support the http: URL scheme
for certificate URLs, and MAY support other schemes.
If the protocol used to retrieve certificates or certificate chains
returns a MIME formatted response (as HTTP does), then the following
MIME Content-Types SHALL be used: when a single X.509v3 certificate
is returned, the Content-Type is "application/pkix-cert" [PKIOP], and
when a chain of X.509v3 certificates is returned, the Content-Type is
"application/pkix-pkipath" (see Section 8).
If a SHA-1 hash is present for an URL, then the server MUST check that the SHA-1 hash of the contents of the object retrieved from that URL (after decoding any MIME Content-Transfer-Encoding) matches the given hash. If any retrieved object does not have the correct SHA-1 hash, the server MUST abort the handshake with a "bad_certificate_hash_value" alert. Note that clients may choose to send either "Certificate" or "CertificateURL" after successfully negotiating the option to send certificate URLs. The option to send a certificate is included to provide flexibility to clients possessing multiple certificates. If a server encounters an unreasonable delay in obtaining certificates in a given CertificateURL, it SHOULD time out and signal a "certificate_unobtainable" error alert.3.4. Trusted CA Indication
Constrained clients that, due to memory limitations, possess only a small number of CA root keys, may wish to indicate to servers which root keys they possess, in order to avoid repeated handshake failures. In order to indicate which CA root keys they possess, clients MAY include an extension of type "trusted_ca_keys" in the (extended) client hello. The "extension_data" field of this extension SHALL contain "TrustedAuthorities" where: struct { TrustedAuthority trusted_authorities_list<0..2^16-1>; } TrustedAuthorities; struct { IdentifierType identifier_type; select (identifier_type) { case pre_agreed: struct {}; case key_sha1_hash: SHA1Hash; case x509_name: DistinguishedName; case cert_sha1_hash: SHA1Hash; } identifier; } TrustedAuthority; enum { pre_agreed(0), key_sha1_hash(1), x509_name(2), cert_sha1_hash(3), (255) } IdentifierType; opaque DistinguishedName<1..2^16-1>;
Here "TrustedAuthorities" provides a list of CA root key identifiers
that the client possesses. Each CA root key is identified via
either:
- "pre_agreed" - no CA root key identity supplied.
- "key_sha1_hash" - contains the SHA-1 hash of the CA root key. For
DSA and ECDSA keys, this is the hash of the "subjectPublicKey"
value. For RSA keys, the hash is of the big-endian byte string
representation of the modulus without any initial 0-valued bytes.
(This copies the key hash formats deployed in other environments.)
- "x509_name" - contains the DER-encoded X.509 DistinguishedName of
the CA.
- "cert_sha1_hash" - contains the SHA-1 hash of a DER-encoded
Certificate containing the CA root key.
Note that clients may include none, some, or all of the CA root keys
they possess in this extension.
Note also that it is possible that a key hash or a Distinguished Name
alone may not uniquely identify a certificate issuer - for example if
a particular CA has multiple key pairs - however here we assume this
is the case following the use of Distinguished Names to identify
certificate issuers in TLS.
The option to include no CA root keys is included to allow the client
to indicate possession of some pre-defined set of CA root keys.
Servers that receive a client hello containing the "trusted_ca_keys"
extension, MAY use the information contained in the extension to
guide their selection of an appropriate certificate chain to return
to the client. In this event, the server SHALL include an extension
of type "trusted_ca_keys" in the (extended) server hello. The
"extension_data" field of this extension SHALL be empty.
3.5. Truncated HMAC
Currently defined TLS cipher suites use the MAC construction HMAC
with either MD5 or SHA-1 [HMAC] to authenticate record layer
communications. In TLS the entire output of the hash function is
used as the MAC tag. However it may be desirable in constrained
environments to save bandwidth by truncating the output of the hash
function to 80 bits when forming MAC tags.
In order to negotiate the use of 80-bit truncated HMAC, clients MAY include an extension of type "truncated_hmac" in the extended client hello. The "extension_data" field of this extension SHALL be empty. Servers that receive an extended hello containing a "truncated_hmac" extension, MAY agree to use a truncated HMAC by including an extension of type "truncated_hmac", with empty "extension_data", in the extended server hello. Note that if new cipher suites are added that do not use HMAC, and the session negotiates one of these cipher suites, this extension will have no effect. It is strongly recommended that any new cipher suites using other MACs consider the MAC size as an integral part of the cipher suite definition, taking into account both security and bandwidth considerations. If HMAC truncation has been successfully negotiated during a TLS handshake, and the negotiated cipher suite uses HMAC, both the client and the server pass this fact to the TLS record layer along with the other negotiated security parameters. Subsequently during the session, clients and servers MUST use truncated HMACs, calculated as specified in [HMAC]. That is, CipherSpec.hash_size is 10 bytes, and only the first 10 bytes of the HMAC output are transmitted and checked. Note that this extension does not affect the calculation of the PRF as part of handshaking or key derivation. The negotiated HMAC truncation size applies for the duration of the session including session resumptions.3.6. Certificate Status Request
Constrained clients may wish to use a certificate-status protocol such as OCSP [OCSP] to check the validity of server certificates, in order to avoid transmission of CRLs and therefore save bandwidth on constrained networks. This extension allows for such information to be sent in the TLS handshake, saving roundtrips and resources. In order to indicate their desire to receive certificate status information, clients MAY include an extension of type "status_request" in the (extended) client hello. The "extension_data" field of this extension SHALL contain "CertificateStatusRequest" where:
struct {
CertificateStatusType status_type;
select (status_type) {
case ocsp: OCSPStatusRequest;
} request;
} CertificateStatusRequest;
enum { ocsp(1), (255) } CertificateStatusType;
struct {
ResponderID responder_id_list<0..2^16-1>;
Extensions request_extensions;
} OCSPStatusRequest;
opaque ResponderID<1..2^16-1>;
opaque Extensions<0..2^16-1>;
In the OCSPStatusRequest, the "ResponderIDs" provides a list of OCSP
responders that the client trusts. A zero-length "responder_id_list"
sequence has the special meaning that the responders are implicitly
known to the server - e.g., by prior arrangement. "Extensions" is a
DER encoding of OCSP request extensions.
Both "ResponderID" and "Extensions" are DER-encoded ASN.1 types as
defined in [OCSP]. "Extensions" is imported from [PKIX]. A zero-
length "request_extensions" value means that there are no extensions
(as opposed to a zero-length ASN.1 SEQUENCE, which is not valid for
the "Extensions" type).
In the case of the "id-pkix-ocsp-nonce" OCSP extension, [OCSP] is
unclear about its encoding; for clarification, the nonce MUST be a
DER-encoded OCTET STRING, which is encapsulated as another OCTET
STRING (note that implementations based on an existing OCSP client
will need to be checked for conformance to this requirement).
Servers that receive a client hello containing the "status_request"
extension, MAY return a suitable certificate status response to the
client along with their certificate. If OCSP is requested, they
SHOULD use the information contained in the extension when selecting
an OCSP responder, and SHOULD include request_extensions in the OCSP
request.
Servers return a certificate response along with their certificate by
sending a "CertificateStatus" message immediately after the
"Certificate" message (and before any "ServerKeyExchange" or
"CertificateRequest" messages). If a server returns a
"CertificateStatus" message, then the server MUST have included an
extension of type "status_request" with empty "extension_data" in the
extended server hello.
struct {
CertificateStatusType status_type;
select (status_type) {
case ocsp: OCSPResponse;
} response;
} CertificateStatus;
opaque OCSPResponse<1..2^24-1>;
An "ocsp_response" contains a complete, DER-encoded OCSP response
(using the ASN.1 type OCSPResponse defined in [OCSP]). Note that
only one OCSP response may be sent.
The "CertificateStatus" message is conveyed using the handshake
message type "certificate_status".
Note that a server MAY also choose not to send a "CertificateStatus"
message, even if it receives a "status_request" extension in the
client hello message.
Note in addition that servers MUST NOT send the "CertificateStatus"
message unless it received a "status_request" extension in the client
hello message.
Clients requesting an OCSP response, and receiving an OCSP response
in a "CertificateStatus" message MUST check the OCSP response and
abort the handshake if the response is not satisfactory.
4. Error Alerts
This section defines new error alerts for use with the TLS extensions
defined in this document.
The following new error alerts are defined. To avoid "breaking"
existing clients and servers, these alerts MUST NOT be sent unless
the sending party has received an extended hello message from the
party they are communicating with.
- "unsupported_extension" - this alert is sent by clients that
receive an extended server hello containing an extension that they
did not put in the corresponding client hello (see Section 2.3).
This message is always fatal.
- "unrecognized_name" - this alert is sent by servers that receive a
server_name extension request, but do not recognize the server
name. This message MAY be fatal.
- "certificate_unobtainable" - this alert is sent by servers who are
unable to retrieve a certificate chain from the URL supplied by
the client (see Section 3.3). This message MAY be fatal - for
example if client authentication is required by the server for the
handshake to continue and the server is unable to retrieve the
certificate chain, it may send a fatal alert.
- "bad_certificate_status_response" - this alert is sent by clients
that receive an invalid certificate status response (see Section
3.6). This message is always fatal.
- "bad_certificate_hash_value" - this alert is sent by servers when
a certificate hash does not match a client provided
certificate_hash. This message is always fatal.
These error alerts are conveyed using the following syntax:
enum {
close_notify(0),
unexpected_message(10),
bad_record_mac(20),
decryption_failed(21),
record_overflow(22),
decompression_failure(30),
handshake_failure(40),
/* 41 is not defined, for historical reasons */
bad_certificate(42),
unsupported_certificate(43),
certificate_revoked(44),
certificate_expired(45),
certificate_unknown(46),
illegal_parameter(47),
unknown_ca(48),
access_denied(49),
decode_error(50),
decrypt_error(51),
export_restriction(60),
protocol_version(70),
insufficient_security(71),
internal_error(80),
user_canceled(90),
no_renegotiation(100),
unsupported_extension(110), /* new */
certificate_unobtainable(111), /* new */
unrecognized_name(112), /* new */
bad_certificate_status_response(113), /* new */
bad_certificate_hash_value(114), /* new */
(255)
} AlertDescription;
5. Procedure for Defining New Extensions
Traditionally for Internet protocols, the Internet Assigned Numbers
Authority (IANA) handles the allocation of new values for future
expansion, and RFCs usually define the procedure to be used by the
IANA. However, there are subtle (and not so subtle) interactions
that may occur in this protocol between new features and existing
features which may result in a significant reduction in overall
security.
Therefore, requests to define new extensions (including assigning
extension and error alert numbers) must be approved by IETF Standards
Action.
The following considerations should be taken into account when
designing new extensions:
- All of the extensions defined in this document follow the
convention that for each extension that a client requests and that
the server understands, the server replies with an extension of
the same type.
- Some cases where a server does not agree to an extension are error
conditions, and some simply a refusal to support a particular
feature. In general error alerts should be used for the former,
and a field in the server extension response for the latter.
- Extensions should as far as possible be designed to prevent any
attack that forces use (or non-use) of a particular feature by
manipulation of handshake messages. This principle should be
followed regardless of whether the feature is believed to cause a
security problem.
Often the fact that the extension fields are included in the
inputs to the Finished message hashes will be sufficient, but
extreme care is needed when the extension changes the meaning of
messages sent in the handshake phase. Designers and implementors
should be aware of the fact that until the handshake has been
authenticated, active attackers can modify messages and insert,
remove, or replace extensions.
- It would be technically possible to use extensions to change major
aspects of the design of TLS; for example the design of cipher
suite negotiation. This is not recommended; it would be more
appropriate to define a new version of TLS - particularly since
the TLS handshake algorithms have specific protection against
version rollback attacks based on the version number, and the
possibility of version rollback should be a significant
consideration in any major design change.
6. Security Considerations
Security considerations for the extension mechanism in general, and
the design of new extensions, are described in the previous section.
A security analysis of each of the extensions defined in this
document is given below.
In general, implementers should continue to monitor the state of the
art, and address any weaknesses identified.
Additional security considerations are described in the TLS 1.0 RFC
[TLS].
6.1. Security of server_name
If a single server hosts several domains, then clearly it is
necessary for the owners of each domain to ensure that this satisfies
their security needs. Apart from this, server_name does not appear
to introduce significant security issues.
Implementations MUST ensure that a buffer overflow does not occur
whatever the values of the length fields in server_name.
Although this document specifies an encoding for internationalized
hostnames in the server_name extension, it does not address any
security issues associated with the use of internationalized
hostnames in TLS - in particular, the consequences of "spoofed" names
that are indistinguishable from another name when displayed or
printed. It is recommended that server certificates not be issued
for internationalized hostnames unless procedures are in place to
mitigate the risk of spoofed hostnames.
6.2. Security of max_fragment_length
The maximum fragment length takes effect immediately, including for
handshake messages. However, that does not introduce any security
complications that are not already present in TLS, since [TLS]
requires implementations to be able to handle fragmented handshake
messages.
Note that as described in section 3.2, once a non-null cipher suite has been activated, the effective maximum fragment length depends on the cipher suite and compression method, as well as on the negotiated max_fragment_length. This must be taken into account when sizing buffers, and checking for buffer overflow.6.3. Security of client_certificate_url
There are two major issues with this extension. The first major issue is whether or not clients should include certificate hashes when they send certificate URLs. When client authentication is used *without* the client_certificate_url extension, the client certificate chain is covered by the Finished message hashes. The purpose of including hashes and checking them against the retrieved certificate chain, is to ensure that the same property holds when this extension is used - i.e., that all of the information in the certificate chain retrieved by the server is as the client intended. On the other hand, omitting certificate hashes enables functionality that is desirable in some circumstances - for example clients can be issued daily certificates that are stored at a fixed URL and need not be provided to the client. Clients that choose to omit certificate hashes should be aware of the possibility of an attack in which the attacker obtains a valid certificate on the client's key that is different from the certificate the client intended to provide. Although TLS uses both MD5 and SHA-1 hashes in several other places, this was not believed to be necessary here. The property required of SHA-1 is second pre-image resistance. The second major issue is that support for client_certificate_url involves the server acting as a client in another URL protocol. The server therefore becomes subject to many of the same security concerns that clients of the URL scheme are subject to, with the added concern that the client can attempt to prompt the server to connect to some, possibly weird-looking URL. In general this issue means that an attacker might use the server to indirectly attack another host that is vulnerable to some security flaw. It also introduces the possibility of denial of service attacks in which an attacker makes many connections to the server, each of which results in the server attempting a connection to the target of the attack.
Note that the server may be behind a firewall or otherwise able to access hosts that would not be directly accessible from the public Internet; this could exacerbate the potential security and denial of service problems described above, as well as allowing the existence of internal hosts to be confirmed when they would otherwise be hidden. The detailed security concerns involved will depend on the URL schemes supported by the server. In the case of HTTP, the concerns are similar to those that apply to a publicly accessible HTTP proxy server. In the case of HTTPS, the possibility for loops and deadlocks to be created exists and should be addressed. In the case of FTP, attacks similar to FTP bounce attacks arise. As a result of this issue, it is RECOMMENDED that the client_certificate_url extension should have to be specifically enabled by a server administrator, rather than being enabled by default. It is also RECOMMENDED that URI protocols be enabled by the administrator individually, and only a minimal set of protocols be enabled, with unusual protocols offering limited security or whose security is not well-understood being avoided. As discussed in [URI], URLs that specify ports other than the default may cause problems, as may very long URLs (which are more likely to be useful in exploiting buffer overflow bugs). Also note that HTTP caching proxies are common on the Internet, and some proxies do not check for the latest version of an object correctly. If a request using HTTP (or another caching protocol) goes through a misconfigured or otherwise broken proxy, the proxy may return an out-of-date response.6.4. Security of trusted_ca_keys
It is possible that which CA root keys a client possesses could be regarded as confidential information. As a result, the CA root key indication extension should be used with care. The use of the SHA-1 certificate hash alternative ensures that each certificate is specified unambiguously. As for the previous extension, it was not believed necessary to use both MD5 and SHA-1 hashes.6.5. Security of truncated_hmac
It is possible that truncated MACs are weaker than "un-truncated" MACs. However, no significant weaknesses are currently known or expected to exist for HMAC with MD5 or SHA-1, truncated to 80 bits.
Note that the output length of a MAC need not be as long as the length of a symmetric cipher key, since forging of MAC values cannot be done off-line: in TLS, a single failed MAC guess will cause the immediate termination of the TLS session. Since the MAC algorithm only takes effect after the handshake messages have been authenticated by the hashes in the Finished messages, it is not possible for an active attacker to force negotiation of the truncated HMAC extension where it would not otherwise be used (to the extent that the handshake authentication is secure). Therefore, in the event that any security problem were found with truncated HMAC in future, if either the client or the server for a given session were updated to take into account the problem, they would be able to veto use of this extension.6.6. Security of status_request
If a client requests an OCSP response, it must take into account that an attacker's server using a compromised key could (and probably would) pretend not to support the extension. A client that requires OCSP validation of certificates SHOULD either contact the OCSP server directly in this case, or abort the handshake. Use of the OCSP nonce request extension (id-pkix-ocsp-nonce) may improve security against attacks that attempt to replay OCSP responses; see section 4.4.1 of [OCSP] for further details.7. Internationalization Considerations
None of the extensions defined here directly use strings subject to localization. Domain Name System (DNS) hostnames are encoded using UTF-8. If future extensions use text strings, then internationalization should be considered in their design.8. IANA Considerations
The MIME type "application/pkix-pkipath" has been registered by the IANA with the following template: To: ietf-types@iana.org Subject: Registration of MIME media type application/pkix-pkipath MIME media type name: application MIME subtype name: pkix-pkipath Required parameters: none
Optional parameters: version (default value is "1")
Encoding considerations:
This MIME type is a DER encoding of the ASN.1 type PkiPath,
defined as follows:
PkiPath ::= SEQUENCE OF Certificate
PkiPath is used to represent a certification path. Within the
sequence, the order of certificates is such that the subject of
the first certificate is the issuer of the second certificate,
etc.
This is identical to the definition that will be published in
[X509-4th-TC1]; note that it is different from that in [X509-4th].
All Certificates MUST conform to [PKIX]. (This should be
interpreted as a requirement to encode only PKIX-conformant
certificates using this type. It does not necessarily require
that all certificates that are not strictly PKIX-conformant must
be rejected by relying parties, although the security consequences
of accepting any such certificates should be considered
carefully.)
DER (as opposed to BER) encoding MUST be used. If this type is
sent over a 7-bit transport, base64 encoding SHOULD be used.
Security considerations:
The security considerations of [X509-4th] and [PKIX] (or any
updates to them) apply, as well as those of any protocol that uses
this type (e.g., TLS).
Note that this type only specifies a certificate chain that can be
assessed for validity according to the relying party's existing
configuration of trusted CAs; it is not intended to be used to
specify any change to that configuration.
Interoperability considerations:
No specific interoperability problems are known with this type,
but for recommendations relating to X.509 certificates in general,
see [PKIX].
Published specification: this memo, and [PKIX].
Applications which use this media type: TLS. It may also be used by
other protocols, or for general interchange of PKIX certificate
chains.
Additional information:
Magic number(s): DER-encoded ASN.1 can be easily recognized.
Further parsing is required to distinguish from other ASN.1
types.
File extension(s): .pkipath
Macintosh File Type Code(s): not specified
Person & email address to contact for further information:
Magnus Nystrom <magnus@rsasecurity.com>
Intended usage: COMMON
Author/Change controller:
Magnus Nystrom <magnus@rsasecurity.com>
9. Intellectual Property Rights
The IETF takes no position regarding the validity or scope of any
intellectual property or other rights that might be claimed to
pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights
might or might not be available; neither does it represent that it
has made any effort to identify any such rights. Information on the
IETF's procedures with respect to rights in standards-track and
standards-related documentation can be found in RFC 2028. Copies of
claims of rights made available for publication and any assurances of
licenses to be made available, or the result of an attempt made to
obtain a general license or permission for the use of such
proprietary rights by implementors or users of this specification can
be obtained from the IETF Secretariat.
The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary
rights which may cover technology that may be required to practice
this document. Please address the information to the IETF Executive
Director.
10. Acknowledgments
The authors wish to thank the TLS Working Group and the WAP Security
Group. This document is based on discussion within these groups.
11. Normative References
[HMAC] Krawczyk, H., Bellare, M. and R. Canetti, "HMAC: Keyed-hashing for message authentication", RFC 2104, February 1997. [HTTP] Fielding, R., Gettys, J., Mogul, J., Frystyk, H., Masinter, L., Leach, P. and T. Berners-Lee, "Hypertext Transfer Protocol -- HTTP/1.1", RFC 2616, June 1999. [IDNA] Faltstrom, P., Hoffman, P. and A. Costello, "Internationalizing Domain Names in Applications (IDNA)", RFC 3490, March 2003. [KEYWORDS] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [OCSP] Myers, M., Ankney, R., Malpani, A., Galperin, S. and C. Adams, "Internet X.509 Public Key Infrastructure: Online Certificate Status Protocol - OCSP", RFC 2560, June 1999. [PKIOP] Housley, R. and P. Hoffman, "Internet X.509 Public Key Infrastructure - Operation Protocols: FTP and HTTP", RFC 2585, May 1999. [PKIX] Housley, R., Polk, W., Ford, W. and D. Solo, "Internet Public Key Infrastructure - Certificate and Certificate Revocation List (CRL) Profile", RFC 3280, April 2002. [TLS] Dierks, T. and C. Allen, "The TLS Protocol Version 1.0", RFC 2246, January 1999. [URI] Berners-Lee, T., Fielding, R. and L. Masinter, "Uniform Resource Identifiers (URI): Generic Syntax", RFC 2396, August 1998. [UTF8] Yergeau, F., "UTF-8, a transformation format of ISO 10646", RFC 2279, January 1998. [X509-4th] ITU-T Recommendation X.509 (2000) | ISO/IEC 9594- 8:2001, "Information Systems - Open Systems Interconnection - The Directory: Public key and attribute certificate frameworks."
[X509-4th-TC1] ITU-T Recommendation X.509(2000) Corrigendum 1(2001) | ISO/IEC 9594-8:2001/Cor.1:2002, Technical Corrigendum 1 to ISO/IEC 9594:8:2001.12. Informative References
[KERB] Medvinsky, A. and M. Hur, "Addition of Kerberos Cipher Suites to Transport Layer Security (TLS)", RFC 2712, October 1999. [MAILING LIST] J. Mikkelsen, R. Eberhard, and J. Kistler, "General ClientHello extension mechanism and virtual hosting," ietf-tls mailing list posting, August 14, 2000. [AESSUITES] Chown, P., "Advanced Encryption Standard (AES) Ciphersuites for Transport Layer Security (TLS)", RFC 3268, June 2002.13. Authors' Addresses
Simon Blake-Wilson BCI EMail: sblakewilson@bcisse.com Magnus Nystrom RSA Security EMail: magnus@rsasecurity.com David Hopwood Independent Consultant EMail: david.hopwood@zetnet.co.uk Jan Mikkelsen Transactionware EMail: janm@transactionware.com Tim Wright Vodafone EMail: timothy.wright@vodafone.com
14. Full Copyright Statement
Copyright (C) The Internet Society (2003). All Rights Reserved. This document and translations of it may be copied and furnished to others, and derivative works that comment on or otherwise explain it or assist in its implementation may be prepared, copied, published and distributed, in whole or in part, without restriction of any kind, provided that the above copyright notice and this paragraph are included on all such copies and derivative works. However, this document itself may not be modified in any way, such as by removing the copyright notice or references to the Internet Society or other Internet organizations, except as needed for the purpose of developing Internet standards in which case the procedures for copyrights defined in the Internet Standards process must be followed, or as required to translate it into languages other than English. The limited permissions granted above are perpetual and will not be revoked by the Internet Society or its successors or assigns. This document and the information contained herein is provided on an "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Acknowledgement Funding for the RFC Editor function is currently provided by the Internet Society.