RFC 3202
Definitions of Managed Objects for Frame Relay Service Level Definitions
7. Object Definitions
FRSLD-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Counter32, Gauge32, Integer32, Counter64, TimeTicks, mib-2 FROM SNMPv2-SMI CounterBasedGauge64 FROM HCNUM-TC TEXTUAL-CONVENTION, RowStatus, TimeStamp FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF ifIndex FROM IF-MIB DLCI FROM FRAME-RELAY-DTE-MIB; frsldMIB MODULE-IDENTITY LAST-UPDATED "200201030000Z" -- January 3, 2002 ORGANIZATION "IETF Frame Relay Service MIB Working Group" CONTACT-INFO "IETF Frame Relay Service MIB (frnetmib) Working Group WG Charter: http://www.ietf.org/html.charters/ frnetmib-charter.html WG-email: frnetmib@sunroof.eng.sun.com Subscribe: frnetmib-request@sunroof.eng.sun.com Email Archive: ftp://ftp.ietf.org/ietf-mail-archive/frnetmib
Chair: Andy Malis
Vivace Networks
Email: Andy.Malis@vivacenetworks.com
WG editor: Robert Steinberger
Paradyne Networks and
Fujitsu Network Communications
Email: robert.steinberger@fnc.fujitsu.com
Co-author: Orly Nicklass
RAD Data Communications Ltd.
EMail: Orly_n@rad.co.il"
DESCRIPTION
"The MIB module to describe generic objects for
FRF.13 Frame Relay Service Level Definitions."
REVISION "200201030000Z" -- January 3, 2002
DESCRIPTION
"Initial version, published as RFC 3202"
::= { mib-2 95 }
--
-- Textual Conventions
--
FrsldTxRP ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The reference point a PVC uses for calculation
of transmitter related statistics.
The valid values for this type of object are as follows:
- srcLocalRP(1) for the local source
- ingTxLocalRP(2) for the local ingress queue input
- tpTxLocalRP(3) for the local traffic policing
- eqiTxLocalRP(4) for the local egress queue input
- eqoTxLocalRP(5) for the local egress queue output
- otherTxLocalRP(6) for any other local transmit point
- srcRemoteRP(7) for the remote source
- ingTxLocalRP(8) for the remote ingress queue input
- tpTxLocalRP(9) for the remote traffic policing
- eqiTxRemoteRP(10) for the remote egress queue input
- eqoTxRemoteRP(11) for the remote egress queue output
- otherTxRemoteRP(12) for any other remote xmit point"
REFERENCE
"FRF.13: Section 2.3"
SYNTAX INTEGER {
srcLocalRP(1),
ingTxLocalRP(2),
tpTxLocalRP(3),
eqiTxLocalRP(4),
eqoTxLocalRP(5),
otherTxLocalRP(6),
srcRemoteRP(7),
ingTxRemoteRP(8),
tpTxRemoteRP(9),
eqiTxRemoteRP(10),
eqoTxRemoteRP(11),
otherTxRemoteRP(12)
}
FrsldRxRP ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The reference point a PVC uses for calculation
of receiver related statistics.
The valid values for this object are as follows:
- desLocalRP(1) for the local destination
- ingRxLocalRP(2) for the local ingress queue input
- tpRxLocalRP(3) for the local traffic policing
- eqiRxLocalRP(4) for the local egress queue input
- eqoRxLocalRP(5) for the local egress queue output
- otherRxLocalRP(6) for any other local receive point
- desRemoteRP(7) for the remote destination
- ingRxRemoteRP(8) for the remote ingress input
- tpRxRemoteRP(9) for the remote traffic policing
- eqiRxRemoteRP(10) for the remote egress queue input
- eqoRxRemoteRP(11) for the remote egress queue output
- otherRxRemoteRP(12) for any other remote receive point"
REFERENCE
"FRF.13: Section 2.3"
SYNTAX INTEGER {
desLocalRP(1),
ingRxLocalRP(2),
tpRxLocalRP(3),
eqiRxLocalRP(4),
eqoRxLocalRP(5),
otherRxLocalRP(6),
desRemoteRP(7),
ingRxRemoteRP(8),
tpRxRemoteRP(9),
eqiRxRemoteRP(10),
eqoRxRemoteRP(11),
otherRxRemoteRP(12)
}
--
-- Base Objects
---
frsldObjects OBJECT IDENTIFIER ::= { frsldMIB 1 }
frsldCapabilities OBJECT IDENTIFIER ::= { frsldMIB 2 }
frsldConformance OBJECT IDENTIFIER ::= { frsldMIB 3 }
-- The Frame Relay Service Level Definitions PVC Control Table
--
-- This table is used to define and display the parameters of
-- service level definitions on individual PVCs.
frsldPvcCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF FrsldPvcCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Frame Relay Service Level Definitions
PVC control table."
::= { frsldObjects 1 }
frsldPvcCtrlEntry OBJECT-TYPE
SYNTAX FrsldPvcCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the Frame Relay Service Level
Definitions PVC control table."
INDEX { ifIndex, frsldPvcCtrlDlci,
frsldPvcCtrlTransmitRP, frsldPvcCtrlReceiveRP}
::= { frsldPvcCtrlTable 1 }
FrsldPvcCtrlEntry ::=
SEQUENCE {
--
-- Index Control Variables
--
frsldPvcCtrlDlci DLCI,
frsldPvcCtrlTransmitRP FrsldTxRP,
frsldPvcCtrlReceiveRP FrsldRxRP,
frsldPvcCtrlStatus RowStatus,
--
-- Service Level Definitions Setup Variables
--
frsldPvcCtrlPacketFreq Integer32,
--
-- Delay Specific Setup Variables
--
frsldPvcCtrlDelayFrSize Integer32,
frsldPvcCtrlDelayType INTEGER,
frsldPvcCtrlDelayTimeOut Integer32,
--
-- Data Persistence Control Variables
--
frsldPvcCtrlPurge Integer32,
frsldPvcCtrlDeleteOnPurge INTEGER,
frsldPvcCtrlLastPurgeTime TimeStamp
}
frsldPvcCtrlDlci OBJECT-TYPE
SYNTAX DLCI
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of this object is equal to the DLCI
value for this PVC."
::= { frsldPvcCtrlEntry 1 }
frsldPvcCtrlTransmitRP OBJECT-TYPE
SYNTAX FrsldTxRP
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The reference point this PVC uses for calculation
of transmitter related statistics. This object
together with frsldPvcCtrlReceiveRP define the
measurement domain."
REFERENCE
"FRF.13: Section 2.3"
::= { frsldPvcCtrlEntry 2 }
frsldPvcCtrlReceiveRP OBJECT-TYPE
SYNTAX FrsldRxRP
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The reference point this PVC uses for calculation
of receiver related statistics. This object
together with frsldPvcCtrlTransmitRP define the
measurement domain."
::= { frsldPvcCtrlEntry 3 }
frsldPvcCtrlStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the current row. This object is
used to add, delete, and disable rows in this
table. When the status changes to active(1) for the
first time, a row will also be added to the data
table below. This row SHOULD not be removed until
the status is changed to deleted.
When this object is set to destroy(6), all associated
sample and data table rows will also be deleted.
When this object is changed from active(1) to any
other valid value, the defined purge behavior will
affect the data and sample tables.
The rows added to this table MUST have a valid
ifIndex and an ifType related to frame relay. Further,
the reference points referred to by frsldPvcCtrlTransmitRP
and frsldPvcCtrlReceiveRP MUST be supported (see the
frsldRPCaps object).
If at any point the row is not in the active(1) state
and the DLCI no longer exists, the state SHOULD
report notReady(3).
The data in this table SHOULD persist through power
cycles. The symantics of readiness for the rows still
applies. This means that it is possible for a row to be
reprovisioned as notReady(3) if the underlying DLCI does
not persist."
::= { frsldPvcCtrlEntry 4 }
frsldPvcCtrlPacketFreq OBJECT-TYPE
SYNTAX Integer32 (0..3600)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The frequency in seconds between initiation of
specialized packets used to collect delay and / or
delivery information as supported by the device.
A value of zero indicates that no packets will
be sent."
DEFVAL { 60 }
::= { frsldPvcCtrlEntry 5 }
frsldPvcCtrlDelayFrSize OBJECT-TYPE
SYNTAX Integer32 (1..8188)
UNITS "octets"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The size of the payload in the frame used for
calculation of network delay."
DEFVAL { 128 }
::= { frsldPvcCtrlEntry 6 }
frsldPvcCtrlDelayType OBJECT-TYPE
SYNTAX INTEGER {
oneWay(1),
roundTrip(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of delay measurement performed."
REFERENCE
"FRF.13: Section 3"
::= { frsldPvcCtrlEntry 7 }
frsldPvcCtrlDelayTimeOut OBJECT-TYPE
SYNTAX Integer32 (1..3600)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A delay frame will count as a missed poll if
it is not updated in the time specified by
frsldPvcCtrlDelayTimeOut."
DEFVAL { 60 }
::= { frsldPvcCtrlEntry 8 }
frsldPvcCtrlPurge OBJECT-TYPE
SYNTAX Integer32 (0..172800) -- up to 48 hours
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object defines the amount of time the device
will wait, after discovering that a DLCI does not exist,
the DLCI was deleted or the value of frsldPvcCtrlStatus
changes from active(1) to either notInService(2) or
notReady(3), prior to automatically purging the history
in the sample tables and resetting the data in the data
tables to all zeroes. If frsldPvcCtrlStatus is manually
set to destroy(6), this object does not apply."
DEFVAL { 0 }
::= { frsldPvcCtrlEntry 9 }
frsldPvcCtrlDeleteOnPurge OBJECT-TYPE
SYNTAX INTEGER {
none(1),
sampleContols(2),
all(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object defines whether rows will
automatically be deleted from the tables
when the information is purged.
- A value of none(1) indicates that no rows
will deleted. The last known values will
be preserved.
- A value of sampleControls(2) indicates
that all associated sample control rows
will be deleted.
- A value of all(3) indicates that all
associated rows SHOULD be deleted."
DEFVAL { all }
::= { frsldPvcCtrlEntry 10 }
frsldPvcCtrlLastPurgeTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the value of sysUpTime
at the time the information was last purged.
This value SHOULD be set to the sysUpTime
upon setting frsldPvcCtrlStatus to active(1)
for the first time. Each time a
discontinuity in the counters occurs, this
value MUST be set to the sysUpTime.
If frsldPvcCtrlStatus has never been active(1),
this object SHOULD return 0.
This object SHOULD be used as the discontinuity
timer for the counters in frsldPvcDataTable."
::= { frsldPvcCtrlEntry 11 }
-- The Frame Relay Service Level Definitions Sampling Control
-- Table
--
-- This table is used to define the sample control parameters
-- of service level definitions on individual PVCs.
frsldSmplCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF FrsldSmplCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Frame Relay Service Level Definitions
sampling control table."
::= { frsldObjects 2 }
frsldSmplCtrlEntry OBJECT-TYPE
SYNTAX FrsldSmplCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the Frame Relay Service Level
Definitions sample control table."
INDEX { ifIndex, frsldPvcCtrlDlci,
frsldPvcCtrlTransmitRP, frsldPvcCtrlReceiveRP,
frsldSmplCtrlIdx }
::= { frsldSmplCtrlTable 1 }
FrsldSmplCtrlEntry ::=
SEQUENCE {
--
-- Index Control Variables
--
frsldSmplCtrlIdx Integer32,
frsldSmplCtrlStatus RowStatus,
--
-- Collection Control Variables
--
frsldSmplCtrlColPeriod Integer32,
frsldSmplCtrlBuckets Integer32,
frsldSmplCtrlBucketsGranted Integer32
}
frsldSmplCtrlIdx OBJECT-TYPE
SYNTAX Integer32 (1..256)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique index for this row in the
sample control table."
::= { frsldSmplCtrlEntry 1 }
frsldSmplCtrlStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the current row. This object is
used to add, delete, and disable rows in this
table. This row SHOULD NOT be removed until the
status is changed to destroy(6). When the status
changes to active(1), the collection in the sample
tables below will be activated.
The rows added to this table MUST have a valid
ifIndex, an ifType related to frame relay,
frsldPvcCtrlDlci MUST exist for the specified
ifIndex and frsldPvcCtrlStatus MUST have a
value of active(1).
The value of frsldPvcCtrlStatus MUST be active(1)
to transition this object to active(1). If
the value of frsldPvcCtrlStatus becomes anything
other than active(1) when the state of this object
is not active(1), this object SHOULD be set to
notReady(3).
The data in this table SHOULD persist through power
cycles. The symantics of readiness for the rows still
applies. This means that it is possible for a row to be
reprovisioned as notReady(3) if the underlying DLCI does
not persist."
::= { frsldSmplCtrlEntry 2 }
frsldSmplCtrlColPeriod OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The amount of time in seconds that defines a
period of collection for the statistics.
At the end of each period, the statistics will be
sampled and a row is added to the sample table."
::= { frsldSmplCtrlEntry 3 }
frsldSmplCtrlBuckets OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of discrete buckets over which the
data statistics are sampled.
When this object is created or modified, the device
SHOULD attempt to set the frsldSmplCtrlBuckets-
Granted to a value as close as is possible
depending upon the implementation and the available
resources."
DEFVAL { 60 }
::= { frsldSmplCtrlEntry 4 }
frsldSmplCtrlBucketsGranted OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of discrete buckets granted. This
object will return 0 until frsldSmplCtrlStatus is
set to active(1). At that time the buckets will be
allocated depending upon implementation and
available resources."
::= { frsldSmplCtrlEntry 5 }
-- The Frame Relay Service Level Definitions PVC Data Table
--
-- This table contains the accumulated values of
-- the collected data. This table is the table that should
-- be referenced by external polling mechanisms if time
-- based polling be desired.
frsldPvcDataTable OBJECT-TYPE
SYNTAX SEQUENCE OF FrsldPvcDataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Frame Relay Service Level Definitions
data table.
This table contains accumulated values of the
collected data. It is the table that should be
referenced by external polling mechanisms if
time based polling be desired."
::= { frsldObjects 3 }
frsldPvcDataEntry OBJECT-TYPE
SYNTAX FrsldPvcDataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the Frame Relay Service Level
Definitions data table."
INDEX { ifIndex, frsldPvcCtrlDlci,
frsldPvcCtrlTransmitRP, frsldPvcCtrlReceiveRP}
::= { frsldPvcDataTable 1 }
FrsldPvcDataEntry ::=
SEQUENCE {
frsldPvcDataMissedPolls Counter32,
frsldPvcDataFrDeliveredC Counter32,
frsldPvcDataFrDeliveredE Counter32,
frsldPvcDataFrOfferedC Counter32,
frsldPvcDataFrOfferedE Counter32,
frsldPvcDataDataDeliveredC Counter32,
frsldPvcDataDataDeliveredE Counter32,
frsldPvcDataDataOfferedC Counter32,
frsldPvcDataDataOfferedE Counter32,
frsldPvcDataHCFrDeliveredC Counter64,
frsldPvcDataHCFrDeliveredE Counter64,
frsldPvcDataHCFrOfferedC Counter64,
frsldPvcDataHCFrOfferedE Counter64,
frsldPvcDataHCDataDeliveredC Counter64,
frsldPvcDataHCDataDeliveredE Counter64,
frsldPvcDataHCDataOfferedC Counter64,
frsldPvcDataHCDataOfferedE Counter64,
frsldPvcDataUnavailableTime TimeTicks,
frsldPvcDataUnavailables Counter32
}
frsldPvcDataMissedPolls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of polls that have been determined
to be missed. These polls are typically associated
with the calculation of delay but may also be
used for the calculation of other statistics. If an
anticipated poll is not received in a reasonable
amount of time, it should be counted as missed.
The value used to determine the reasonable amount
of time is contained in frsldPvcCtrlDelayTimeOut.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime."
::= { frsldPvcDataEntry 1 }
frsldPvcDataFrDeliveredC OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that were received at
frsldPvcCtrlReceiveRP and determined to have been
sent within CIR.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime."
REFERENCE
"FRF.13: Section 4.1 (FramesDeliveredc)"
::= { frsldPvcDataEntry 2 }
frsldPvcDataFrDeliveredE OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that were received at
frsldPvcCtrlReceiveRP and determined to have been
sent in excess of the CIR.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime."
REFERENCE
"FRF.13: Section 4.1 (FramesDeliverede)"
::= { frsldPvcDataEntry 3 }
frsldPvcDataFrOfferedC OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that were offered through
frsldPvcCtrlTransmitRP within CIR.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime."
REFERENCE
"FRF.13: Section 4.1 (FramesOfferedc)"
::= { frsldPvcDataEntry 4 }
frsldPvcDataFrOfferedE OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that were offered through
frsldPvcCtrlTransmitRP in excess of the CIR.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime."
REFERENCE
"FRF.13: Section 4.1 (FramesOfferede)"
::= { frsldPvcDataEntry 5 }
frsldPvcDataDataDeliveredC OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets that were received at
frsldPvcCtrlReceiveRP and determined to have been
sent within CIR.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime."
REFERENCE
"FRF.13: Section 5.1 (DataDeliveredc)"
::= { frsldPvcDataEntry 6 }
frsldPvcDataDataDeliveredE OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets that were received at
frsldPvcCtrlReceiveRP and determined to have been
sent in excess of the CIR.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime."
REFERENCE
"FRF.13: Section 5.1 (DataDeliverede)"
::= { frsldPvcDataEntry 7 }
frsldPvcDataDataOfferedC OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets that were offered through
frsldPvcCtrlTransmitRP within CIR.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime."
REFERENCE
"FRF.13: Section 5.1 (DataOfferedc)"
::= { frsldPvcDataEntry 8 }
frsldPvcDataDataOfferedE OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets that were offered through
frsldPvcCtrlTransmitRP in excess of the CIR.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime."
REFERENCE
"FRF.13: Section 5.1 (DataOfferede)"
::= { frsldPvcDataEntry 9 }
frsldPvcDataHCFrDeliveredC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that were received at
frsldPvcCtrlReceiveRP and determined to have been
sent within CIR. This object is a 64-bit version
of frsldPvcDataFrDeliveredC.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime."
REFERENCE
"FRF.13: Section 4.1 (FramesDeliveredc)"
::= { frsldPvcDataEntry 10 }
frsldPvcDataHCFrDeliveredE OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that were received at
frsldPvcCtrlReceiveRP and determined to have been
sent in excess of the CIR. This object is a 64-bit
version of frsldPvcDataFrDeliveredE.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime."
REFERENCE
"FRF.13: Section 4.1 (FramesDeliverede)"
::= { frsldPvcDataEntry 11 }
frsldPvcDataHCFrOfferedC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that were offered through
frsldPvcCtrlTransmitRP within CIR. This object is
a 64-bit version of frsldPvcDataFrOfferedC.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime."
REFERENCE
"FRF.13: Section 4.1 (FramesOfferedc)"
::= { frsldPvcDataEntry 12 }
frsldPvcDataHCFrOfferedE OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that were offered through
frsldPvcCtrlTransmitRP in excess of the CIR. This
object is a 64-bit version of frsldPvcDataFrOfferedE.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime."
REFERENCE
"FRF.13: Section 4.1 (FramesOfferede)"
::= { frsldPvcDataEntry 13 }
frsldPvcDataHCDataDeliveredC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets that were received at
frsldPvcCtrlReceiveRP and determined to have been
sent within CIR. This object is a 64-bit version of
frsldPvcDataDataDeliveredC.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime."
REFERENCE
"FRF.13: Section 5.1 (DataDeliveredc)"
::= { frsldPvcDataEntry 14 }
frsldPvcDataHCDataDeliveredE OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets that were received at
frsldPvcCtrlReceiveRP and determined to have been
sent in excess of the CIR. This object is a 64-bit
version of frsldPvcDataDataDeliveredE.
Discontinuities in the value of this counter can
occur at re-initialization of the management system
and at other times as indicated by
frsldPvcCtrlLastPurgeTime."
REFERENCE
"FRF.13: Section 5.1 (DataDeliverede)"
::= { frsldPvcDataEntry 15 }
(next page on part 3)
