Content for TS 38.141-1 Word version: 18.6.0
8 Conducted performance characteristics
8.1 General
8.2 Performance requirements for PUSCH
8.2.1 Performance requirements for PUSCH with transform precoding disabled
8.2.2 Performance requirements for PUSCH with transform precoding enabled
8.2.3 Performance requirements for UCI multiplexed on PUSCH
8.2.4 Performance requirements for PUSCH for high speed train
8.2.5 Performance requirements for UL timing adjustment
8.2.6 Performance requirements for PUSCH with 0.001% BLER
8.2.7 Performance requirements for PUSCH repetition Type A
8.2.8 Performance requirements for PUSCH Mapping Type B with non-slot transmission
8.2.9 Performance requirements for PUSCH msgA for 2-step RA type
8.2.10 Requirements for interlaced PUSCH
8.2.11 Performance requirements for CG-UCI multiplexed on interlaced PUSCH
8.2.12 Performance requirements for TB processing over multi-slot PUSCH (TBoMS)
8.2.13 Performance requirements for PUSCH with DMRS bundling
...
...
8 Conducted performance characteristics p. 195
8.1 General p. 195
8.1.1 Scope and definitions p. 195
8.1.2 Applicability rule p. 196
8.1.2.0 General p. 196
8.1.2.1 Applicability of PUSCH performance requirements p. 196
8.1.2.1.1 Applicability of requirements for different subcarrier spacings p. 196
8.1.2.1.2 Applicability of requirements for different channel bandwidths p. 196
8.1.2.1.3 Applicability of requirements for different configurations p. 196
8.1.2.1.7 Applicability of 2-step RA type requirements for different subcarrier spacings p. 197
8.1.2.1.8 Applicability of PUSCH with 0.001% BLER requirements p. 197
8.1.2.1.9 Applicability of PUSCH repetition type A requirements p. 197
8.1.2.2 Applicability of PUCCH performance requirements p. 197
8.1.2.2.1 Applicability of requirements for different formats p. 197
8.1.2.2.2 Applicability of requirements for different subcarrier spacings p. 197
8.1.2.2.3 Applicability of requirements for different channel bandwidths p. 197
8.1.2.2.4 Applicability of requirements for different configurations p. 197
8.1.2.2.5 Applicability of requirements for multi-slot PUCCH p. 198
8.1.2.2.6 Applicability of requirements for PUCCH sub-slot based repetition p. 198
8.1.2.3 Applicability of PRACH performance requirements p. 198
8.1.2.3.1 Applicability of requirements for different formats p. 198
8.1.2.3.2 Applicability of requirements for different subcarrier spacings p. 198
8.1.2.3.3 Applicability of requirements for different channel bandwidths p. 198
8.1.2.3.4 Applicability of requirements for different restricted set types of long PRACH format 0 p. 198
8.1.2.4 Applicability of PUSCH for high speed train performance requirements p. 198
8.1.2.4.1 Applicability of requirements for different speeds p. 198
8.1.2.4.2 Applicability of requirements for 1T1R p. 198
8.1.2.5 Applicability of interlaced PUSCH performance requirements p. 199
8.1.2.5.1 General applicability of interlaced PUSCH performance requirements p. 199
8.1.2.5.2 Applicability of requirements for different subcarrier spacings p. 199
8.1.2.5.3 Applicability of requirements for different channel bandwidths p. 199
8.1.2.5.4 Applicability of requirements for different configurations p. 199
8.1.2.5.5 Applicability of CG-UCI multiplexed on PUSCH requirements p. 199
8.1.2.6 Applicability of interlaced PUCCH performance requirements p. 199
8.1.2.6.1 General applicability of interlaced PUCCH performance requirements p. 199
8.1.2.6.2 Applicability of requirements for different formats p. 199
8.1.2.6.3 Applicability of requirements for different subcarrier spacings p. 199
8.1.2.6.4 Applicability of requirements for different channel bandwidths p. 200
8.1.2.7 Applicability of performance requirements for PRACH with LRA =1151 and LRA =571 p. 200
8.1.2.7.1 Applicability of requirements for different formats p. 200
8.1.2.7.2 Applicability of requirements for different subcarrier spacings p. 200
8.1.2.7.3 Applicability of requirements for different channel bandwidths p. 200
8.1.2.8 Applicability of performance requirements for PUSCH with TB over Multi-Slots p. 200
8.1.2.9 Applicability of performance requirements for PUSCH with DM-RS bundling p. 200
8.1.2.9.1 Applicability of requirements for TDD with different subcarrier spacings p. 200
8.1.2.9.2 Applicability of requirements for TDD with different UL-DL patterns p. 200
8.1.2.9.3 Applicability of requirements for different receiver antenna connectors p. 201
8.1.2.10 Applicability of performance requirements for PUCCH with DM-RS bundling p. 201
8.2 Performance requirements for PUSCH p. 202
8.2.1 Performance requirements for PUSCH with transform precoding disabled p. 202
8.2.1.1 Definition and applicability p. 202
8.2.1.2 Minimum Requirement p. 202
8.2.1.3 Test Purpose p. 202
8.2.1.4 Method of test p. 202
8.2.1.4.1 Initial Conditions p. 202
8.2.1.4.2 Procedure p. 202
8.2.1.5 Test Requirement p. 203
8.2.2 Performance requirements for PUSCH with transform precoding enabled p. 211
8.2.2.1 Definition and applicability p. 211
8.2.2.2 Minimum Requirement p. 211
8.2.2.3 Test Purpose p. 211
8.2.2.4 Method of test p. 211
8.2.2.4.1 Initial Conditions p. 211
8.2.2.4.2 Procedure p. 212
8.2.2.5 Test Requirement p. 213
8.2.3 Performance requirements for UCI multiplexed on PUSCH p. 213
8.2.3.1 Definition and applicability p. 213
8.2.3.2 Minimum Requirements p. 214
8.2.3.3 Test purpose p. 214
8.2.3.4 Method of test p. 214
8.2.3.4.1 Initial conditions p. 214
8.2.3.4.2 Procedure p. 214
8.2.3.5 Test Requirement p. 215
8.2.4 Performance requirements for PUSCH for high speed train p. 216
8.2.4.1 Definition and applicability p. 216
8.2.4.2 Minimum Requirement p. 216
8.2.4.3 Test Purpose p. 216
8.2.4.4 Method of test p. 217
8.2.4.4.1 Initial Conditions p. 217
8.2.4.4.2 Procedure p. 217
8.2.4.5 Test Requirement p. 218
8.2.5 Performance requirements for UL timing adjustment p. 221
8.2.5.1 Definition and applicability p. 221
8.2.5.2 Minimum Requirement p. 221
8.2.5.3 Test Purpose p. 221
8.2.5.4 Method of test p. 221
8.2.5.4.1 Initial Conditions p. 221
8.2.5.4.2 Procedure p. 221
8.2.5.5 Test Requirement for High Speed Train p. 224
8.2.6 Performance requirements for PUSCH with 0.001% BLER p. 225
8.2.6.1 Definition and applicability p. 225
8.2.6.2 Minimum Requirement p. 225
8.2.6.3 Test Purpose p. 225
8.2.6.4 Method of test p. 225
8.2.6.4.1 Initial Conditions p. 225
8.2.6.4.2 Procedure p. 225
8.2.6.5 Test Requirement p. 226
8.2.7 Performance requirements for PUSCH repetition Type A p. 227
8.2.7.1 Definition and applicability p. 227
8.2.7.2 Minimum Requirement p. 228
8.2.7.3 Test Purpose p. 228
8.2.7.4 Method of test p. 228
8.2.7.4.1 Initial Conditions p. 228
8.2.7.4.2 Procedure p. 228
8.2.7.5 Test Requirement p. 229
8.2.8 Performance requirements for PUSCH Mapping Type B with non-slot transmission p. 231
8.2.8.1 Definition and applicability p. 231
8.2.8.2 Minimum Requirement p. 231
8.2.8.3 Test Purpose p. 231
8.2.8.4 Method of test p. 231
8.2.8.4.1 Initial Conditions p. 231
8.2.8.4.2 Procedure p. 231
8.2.8.5 Test Requirement p. 232
8.2.9 Performance requirements for PUSCH msgA for 2-step RA type p. 233
8.2.9.1 Definition and applicability p. 233
8.2.9.2 Minimum Requirement p. 233
8.2.9.3 Test Purpose p. 233
8.2.9.4 Method of test p. 233
8.2.9.4.1 Initial Conditions p. 233
8.2.9.4.2 Procedure p. 233
8.2.9.5 Test Requirement p. 235
8.2.10 Requirements for interlaced PUSCH p. 236
8.2.10.1 Definition and applicability p. 236
8.2.10.2 Minimum Requirement p. 236
8.2.10.3 Test Purpose p. 237
8.2.10.4 Method of test p. 237
8.2.10.4.1 Initial Conditions p. 237
8.2.10.4.2 Procedure p. 237
8.2.10.5 Test Requirement p. 238
8.2.11 Performance requirements for CG-UCI multiplexed on interlaced PUSCH p. 239
8.2.11.1 Definition and applicability p. 239
8.2.11.2 Minimum Requirements p. 239
8.2.11.3 Test purpose p. 240
8.2.11.4 Method of test p. 240
8.2.11.4.1 Initial conditions p. 240
8.2.11.4.2 Procedure p. 240
8.2.11.5 Test Requirement p. 241
8.2.12 Performance requirements for TB processing over multi-slot PUSCH (TBoMS) p. 242
8.2.12.1 Definition and applicability p. 242
8.2.12.2 Minimum Requirement p. 242
8.2.12.3 Test Purpose p. 242
8.2.12.4 Method of test p. 242
8.2.12.4.1 Initial Conditions p. 242
8.2.12.4.2 Procedure p. 243
8.2.12.5 Test Requirement p. 244
8.2.13 Performance requirements for PUSCH with DMRS bundling p. 245
8.2.13.1 Definition and applicability p. 245
8.2.13.2 Minimum Requirement p. 245
8.2.13.3 Test Purpose p. 245
8.2.13.4 Method of test p. 245
8.2.13.4.1 Initial Conditions p. 245
8.2.13.4.2 Procedure p. 245
8.2.13.5 Test Requirement p. 246
