Content for TS 38.141-1 Word version: 18.6.0
6 Conducted transmitter characteristics
6.1 General
6.2 Base station output power
6.3 Output power dynamics
6.4 Transmit ON/OFF power
6.5 Transmitted signal quality
6.6 Unwanted emissions
6.7 Transmitter intermodulation
...
...
6 Conducted transmitter characteristics p. 70
6.1 General p. 70
6.1.1 BS type 1-C p. 70
6.1.2 BS type 1-H p. 70
6.2 Base station output power p. 70
6.2.1 Definition and applicability p. 70
6.2.2 Minimum requirement p. 71
6.2.3 Test purpose p. 72
6.2.4 Method of test p. 72
6.2.4.1 Initial conditions p. 72
6.2.4.2 Procedure p. 72
6.2.5 Test requirement p. 72
6.3 Output power dynamics p. 73
6.3.1 General p. 73
6.3.2 RE power control dynamic range p. 73
6.3.2.1 Definition and applicability p. 73
6.3.2.2 Minimum requirement p. 73
6.3.2.3 Test purpose p. 73
6.3.3 Total power dynamic range p. 73
6.3.3.1 Definition and applicability p. 73
6.3.3.2 Minimum requirement p. 73
6.3.3.3 Test purpose p. 74
6.3.3.4 Method of test p. 74
6.3.3.4.1 Initial conditions p. 74
6.3.3.4.2 Procedure p. 74
6.3.3.5 Test requirements p. 74
6.3.4 NB-IoT RB power dynamic range p. 75
6.3.4.1 Definition and applicability p. 75
6.3.4.2 Minimum requirement p. 75
6.3.4.3 Test purpose p. 75
6.3.4.4 Method of test p. 75
6.3.4.5 Test requirements p. 75
6.4 Transmit ON/OFF power p. 76
6.4.1 Transmitter OFF power p. 76
6.4.1.1 Definition and applicability p. 76
6.4.1.2 Minimum requirement p. 76
6.4.1.3 Test purpose p. 76
6.4.1.4 Method of test p. 76
6.4.1.5 Test requirements p. 76
6.4.2 Transmitter transient period p. 77
6.4.2.1 Definition and applicability p. 77
6.4.2.2 Minimum requirement p. 77
6.4.2.3 Test purpose p. 77
6.4.2.4 Method of test p. 77
6.4.2.4.1 Initial conditions p. 77
6.4.2.4.2 Procedure p. 78
6.4.2.5 Test requirements p. 78
6.5 Transmitted signal quality p. 78
6.5.1 General p. 78
6.5.2 Frequency error p. 79
6.5.2.1 Definition and applicability p. 79
6.5.2.2 Minimum Requirement p. 79
6.5.2.3 Test purpose p. 79
6.5.2.4 Method of test p. 79
6.5.2.5 Test Requirements p. 79
6.5.3 Modulation quality p. 79
6.5.3.1 Definition and applicability p. 79
6.5.3.2 Minimum Requirement p. 79
6.5.3.3 Test purpose p. 80
6.5.3.4 Method of test p. 80
6.5.3.4.1 Initial conditions p. 80
6.5.3.4.2 Procedure p. 80
6.5.3.5 Test requirements p. 81
6.5.4 Time alignment error p. 83
6.5.4.1 Definition and applicability p. 83
6.5.4.2 Minimum requirement p. 83
6.5.4.3 Test purpose p. 83
6.5.4.4 Method of test p. 83
6.5.4.4.1 Initial conditions p. 83
6.5.4.4.2 Procedure p. 83
6.5.4.5 Test requirement p. 84
6.6 Unwanted emissions p. 84
6.6.1 General p. 84
6.6.2 Occupied bandwidth p. 85
6.6.2.1 Definition and applicability p. 85
6.6.2.2 Minimum Requirements p. 85
6.6.2.3 Test purpose p. 85
6.6.2.4 Method of test p. 86
6.6.2.4.1 Initial conditions p. 86
6.6.2.4.2 Procedure p. 86
6.6.2.5 Test requirements p. 87
6.6.3 Adjacent Channel Leakage Power Ratio (ACLR) p. 87
6.6.3.1 Definition and applicability p. 87
6.6.3.2 Minimum requirement p. 87
6.6.3.3 Test purpose p. 87
6.6.3.4 Method of test p. 87
6.6.3.4.1 Initial conditions p. 87
6.6.3.4.2 Procedure p. 88
6.6.3.5 Test requirements p. 88
6.6.3.5.1 General requirements p. 88
6.6.3.5.2 Limits and basic limits p. 88
6.6.3.5.3 BS type 1-C p. 92
6.6.3.5.4 BS type 1-H p. 92
6.6.4 Operating band unwanted emissions p. 93
6.6.4.1 Definition and applicability p. 93
6.6.4.2 Minimum requirement p. 94
6.6.4.3 Test purpose p. 94
6.6.4.4 Method of test p. 95
6.6.4.4.1 Initial conditions p. 95
6.6.4.4.2 Procedure p. 95
6.6.4.5 Test requirements p. 96
6.6.4.5.1 General requirements p. 96
6.6.4.5.2 Basic limits for Wide Area BS (Category A) p. 96
6.6.4.5.3 Basic limits for Wide Area BS (Category B) p. 97
6.6.4.5.3.1 Category B requirements (Option 1) p. 97
6.6.4.5.3.2 Category B requirements (Option 2) p. 100
6.6.4.5.4 Basic limits for Medium Range BS (Category A and B) p. 102
6.6.4.5.5 Basic limits for Local Area BS (Category A and B) p. 106
6.6.4.5.5A Basic limits for Local Area and Medium Range BS for band n46, n96 and n102 (Category A and B) p. 108
6.6.4.5.6 Basic limits for additional requirements p. 111
6.6.4.5.6.1 Limits in FCC Title 47 p. 111
6.6.4.5.6.2 Protection of DTT p. 111
6.6.4.5.6.3 Additional operating band unwanted emissions limits for Band n48 p. 111
6.6.4.5.6.4 Additional operating band unwanted emissions limits for Band n53 p. 111
6.6.4.5.6.5 Protection of GPS p. 112
6.6.4.5.7 BS type 1-C p. 113
6.6.4.5.8 BS type 1-H p. 113
6.6.5 Transmitter spurious emissions p. 113
6.6.5.1 Definition and applicability p. 113
6.6.5.2 Minimum requirement p. 113
6.6.5.3 Test purpose p. 114
6.6.5.4 Method of test p. 114
6.6.5.4.1 Initial conditions p. 114
6.6.5.4.2 Procedure p. 114
6.6.5.5 Test requirements p. 115
6.6.5.5.1 Basic limits p. 115
6.6.5.5.1.1 Tx spurious emissions p. 115
6.6.5.5.1.2 Protection of the BS receiver of own or different BS p. 115
6.6.5.5.1.3 Additional spurious emissions requirements p. 116
6.6.5.5.1.4 Co-location with other base stations p. 127
6.6.5.5.2 Void
6.6.5.5.3 BS type 1-C p. 133
6.6.5.5.4 BS type 1-H p. 133
6.7 Transmitter intermodulation p. 133
6.7.1 Definition and applicability p. 133
6.7.2 Minimum requirement p. 134
6.7.3 Test purpose p. 134
6.7.4 Method of test p. 134
6.7.4.1 Initial conditions p. 134
6.7.4.2 Procedure p. 134
6.7.5 Test requirements p. 135
