Content for TS 36.141 Word version: 18.4.0
8 Performance requirement
8.1 General
8.2 Performance requirements for PUSCH
8.3 Performance requirements for PUCCH
8.4 Performance requirements for PRACH
8.5 Performance requirements for Narrowband IoT
8.6 Performance requirements for subslot-PUSCH
8.7 Performance requirements for SPUCCH
...
...
8 Performance requirement p. 344
8.1 General p. 344
8.2 Performance requirements for PUSCH p. 344
8.2.1 Performance requirements of PUSCH in multipath fading propagation conditions transmission on single antenna port p. 344
8.2.1.1 Definition and applicability p. 344
8.2.1.2 Minimum Requirement p. 345
8.2.1.3 Test Purpose p. 345
8.2.1.4 Method of test p. 345
8.2.1.4.1 Initial Conditions p. 345
8.2.1.4.2 Procedure p. 345
8.2.1.5 Test Requirement p. 345
8.2.1A Performance requirements of PUSCH in multipath fading propagation conditions transmission on two antenna ports p. 363
8.2.1A.1 Definition and applicability p. 363
8.2.1A.2 Minimum Requirement p. 363
8.2.1A.3 Test Purpose p. 363
8.2.1A.4 Method of test p. 363
8.2.1A.4.1 Initial Conditions p. 363
8.2.1A.4.2 Procedure p. 363
8.2.1A.5 Test Requirement p. 364
8.2.2 Performance requirements for UL timing adjustment p. 366
8.2.2.1 Definition and applicability p. 366
8.2.2.2 Minimum Requirement p. 366
8.2.2.3 Test Purpose p. 366
8.2.2.4 Method of test p. 366
8.2.2.4.1 Initial Conditions p. 366
8.2.2.4.2 Procedure p. 366
8.2.2.5 Test Requirement p. 367
8.2.3 Performance requirements for HARQ-ACK multiplexed on PUSCH p. 368
8.2.3.1 Definition and applicability p. 368
8.2.3.2 Minimum Requirement p. 368
8.2.3.3 Test Purpose p. 369
8.2.3.4 Method of test p. 369
8.2.3.4.1 Initial Conditions p. 369
8.2.3.4.2 Procedure p. 369
8.2.3.5 Test Requirement p. 369
8.2.4 Performance requirements for High Speed Train conditions p. 370
8.2.4.1 Definition and applicability p. 370
8.2.4.2 Minimum Requirement p. 370
8.2.4.3 Test Purpose p. 370
8.2.4.4 Method of test p. 371
8.2.4.4.1 Initial Conditions p. 371
8.2.4.4.2 Procedure p. 371
8.2.4.5 Test Requirement p. 372
8.2.5 Performance requirements for PUSCH with TTI bundling and enhanced HARQ pattern p. 375
8.2.5.1 Definition and applicability p. 375
8.2.5.2 Minimum Requirement p. 375
8.2.5.3 Test Purpose p. 376
8.2.5.4 Method of test p. 376
8.2.5.4.1 Initial Conditions p. 376
8.2.5.4.2 Procedure p. 376
8.2.5.5 Test Requirement p. 377
8.2.6 Enhanced performance requirements type A of PUSCH in multipath fading propagation conditions with synchronous interference p. 377
8.2.6.1 Definition and applicability p. 377
8.2.6.2 Minimum Requirement p. 378
8.2.6.3 Test Purpose p. 378
8.2.6.4 Method of test p. 378
8.2.6.4.1 Initial Conditions p. 378
8.2.6.4.2 Procedure p. 378
8.2.6.5 Test Requirement p. 379
8.2.6A Enhanced performance requirements type A of PUSCH in multipath fading propagation conditions with asynchronous interference p. 381
8.2.6A.1 Definition and applicability p. 381
8.2.6A.2 Minimum Requirement p. 382
8.2.6A.3 Test Purpose p. 382
8.2.6A.4 Method of test p. 382
8.2.6A.4.1 Initial Conditions p. 382
8.2.6A.4.2 Procedure p. 382
8.2.6A.5 Test Requirement p. 383
8.2.7 Performance requirements of PUSCH in multipath fading propagation conditions transmission on single antenna port for coverage enhancment p. 385
8.2.7.1 Definition and applicability p. 385
8.2.7.2 Minimum Requirement p. 385
8.2.7.3 Test Purpose p. 385
8.2.7.4 Method of test p. 385
8.2.7.4.1 Initial Conditions p. 385
8.2.7.4.2 Procedure p. 385
8.2.7.5 Test Requirement p. 386
8.2.8 Performance requirements of PUSCH with Frame structure type 3 p. 387
8.2.8.1 Definition and applicability p. 387
8.2.8.2 Minimum Requirement p. 387
8.2.8.3 Test Purpose p. 387
8.2.8.4 Method of test p. 387
8.2.8.4.1 Initial Conditions p. 387
8.2.8.4.2 Procedure p. 387
8.2.8.5 Test Requirement p. 388
8.2.9 Enhanced performance requirements type B of PUSCH in multipath fading propagation conditions p. 388
8.2.9.1 Definition and applicability p. 388
8.2.9.2 Minimum Requirement p. 389
8.2.9.3 Test Purpose p. 389
8.2.9.4 Method of test p. 389
8.2.9.4.1 Initial Conditions p. 389
8.2.9.4.2 Procedure p. 389
8.2.9.5 Test Requirement p. 391
8.2.10 Performance requirements of PUSCH in multipath fading propagation conditions transmission on single antenna port for subPRB transmission p. 393
8.2.10.1 Definition and applicability p. 393
8.2.10.2 Minimum Requirement p. 393
8.2.10.3 Test Purpose p. 394
8.2.10.4 Method of test p. 394
8.2.10.4.1 Initial Conditions p. 394
8.2.10.4.2 Procedure p. 394
8.2.10.5 Test Requirement p. 395
8.3 Performance requirements for PUCCH p. 395
8.3.1 ACK missed detection for single user PUCCH format 1a transmission on single antenna port p. 395
8.3.1.1 Definition and applicability p. 395
8.3.1.2 Minimum Requirement p. 396
8.3.1.3 Test purpose p. 396
8.3.1.4 Method of test p. 396
8.3.1.4.1 Initial Conditions p. 396
8.3.1.4.2 Procedure p. 396
8.3.1.5 Test Requirement p. 396
8.3.2 CQI performance requirements for PUCCH format 2 transmission on single antenna port p. 397
8.3.2.1 Definition and applicability p. 397
8.3.2.2 Minimum Requirement p. 397
8.3.2.3 Test purpose p. 397
8.3.2.4 Method of test p. 397
8.3.2.4.1 Initial Conditions p. 397
8.3.2.4.2 Procedure p. 398
8.3.2.5 Test Requirement p. 398
8.3.3 ACK missed detection for multi user PUCCH format 1a p. 399
8.3.3.1 Definition and applicability p. 399
8.3.3.2 Minimum Requirement p. 399
8.3.3.3 Test purpose p. 399
8.3.3.4 Method of test p. 399
8.3.3.4.1 Initial Conditions p. 399
8.3.3.4.2 Procedure p. 399
8.3.3.5 Test Requirement p. 400
8.3.4 ACK missed detection for PUCCH format 1b with Channel Selection p. 400
8.3.4.1 Definition and applicability p. 400
8.3.4.2 Minimum Requirement p. 401
8.3.4.3 Test purpose p. 401
8.3.4.4 Method of test p. 401
8.3.4.4.1 Initial Conditions p. 401
8.3.4.4.2 Procedure p. 401
8.3.4.5 Test Requirement p. 402
8.3.5 ACK missed detection for PUCCH format 3 p. 402
8.3.5.1 Definition and applicability p. 402
8.3.5.2 Minimum Requirement p. 402
8.3.5.3 Test purpose p. 402
8.3.5.4 Method of test p. 403
8.3.5.4.1 Initial Conditions p. 403
8.3.5.4.2 Procedure p. 403
8.3.5.5 Test Requirement p. 403
8.3.6 NACK to ACK detection for PUCCH format 3 p. 404
8.3.6.1 Definition and applicability p. 404
8.3.6.2 Minimum Requirement p. 404
8.3.6.3 Test purpose p. 404
8.3.6.4 Method of test p. 404
8.3.6.4.1 Initial Conditions p. 404
8.3.6.4.2 Procedure p. 405
8.3.6.5 Test Requirement p. 405
8.3.7 ACK missed detection for PUCCH format 1a transmission on two antenna ports p. 405
8.3.7.1 Definition and applicability p. 405
8.3.7.2 Minimum Requirement p. 406
8.3.7.3 Test purpose p. 406
8.3.7.4 Method of test p. 406
8.3.7.4.1 Initial Conditions p. 406
8.3.7.4.2 Procedure p. 406
8.3.7.5 Test Requirement p. 407
8.3.8 CQI performance requirements for PUCCH format 2 transmission on two antenna ports p. 407
8.3.8.1 Definition and applicability p. 407
8.3.8.2 Minimum Requirement p. 407
8.3.8.3 Test purpose p. 407
8.3.8.4 Method of test p. 407
8.3.8.4.1 Initial Conditions p. 407
8.3.8.4.2 Procedure p. 408
8.3.8.5 Test Requirement p. 408
8.3.9 CQI performance requirements for PUCCH format 2 with DTX detection p. 409
8.3.9.1 Definition and applicability p. 409
8.3.9.2 Minimum Requirement p. 409
8.3.9.3 Test purpose p. 409
8.3.9.4 Method of test p. 409
8.3.9.4.1 Initial Conditions p. 409
8.3.9.4.2 Procedure p. 409
8.3.9.5 Test Requirement p. 410
8.3.10 ACK missed detection for PUCCH format 1a transmission on single antenna port for coverage enhancement p. 410
8.3.10.1 Definition and applicability p. 410
8.3.10.2 Minimum Requirement p. 411
8.3.10.3 Test purpose p. 411
8.3.10.4 Method of test p. 411
8.3.10.4.1 Initial Conditions p. 411
8.3.10.4.2 Procedure p. 411
8.3.10.5 Test Requirement p. 412
8.3.11 CQI performance requirements for PUCCH format 2 transmission on single antenna port for coverage enhancement p. 412
8.3.11.1 Definition and applicability p. 412
8.3.11.2 Minimum Requirement p. 412
8.3.11.3 Test purpose p. 412
8.3.11.4 Method of test p. 412
8.3.11.4.1 Initial Conditions p. 412
8.3.11.4.2 Procedure p. 412
8.3.11.5 Test Requirement p. 413
8.3.12 ACK missed detection for PUCCH format 4 p. 413
8.3.12.1 Definition and applicability p. 413
8.3.12.2 Minimum Requirement p. 414
8.3.12.3 Test purpose p. 414
8.3.12.4 Method of test p. 414
8.3.12.4.1 Initial Conditions p. 414
8.3.12.4.2 Procedure p. 414
8.3.12.5 Test Requirement p. 415
8.3.13 ACK missed detection for PUCCH format 5 p. 415
8.3.13.1 Definition and applicability p. 415
8.3.13.2 Minimum Requirement p. 416
8.3.13.3 Test purpose p. 416
8.3.13.4 Method of test p. 416
8.3.13.4.1 Initial Conditions p. 416
8.3.13.4.2 Procedure p. 416
8.3.13.5 Test Requirement p. 417
8.4 Performance requirements for PRACH p. 417
8.4.1 PRACH false alarm probability and missed detection p. 417
8.4.1.1 Definition and applicability p. 417
8.4.1.2 Minimum Requirement p. 417
8.4.1.3 Test purpose p. 418
8.4.1.4 Method of test p. 418
8.4.1.4.1 Initial Conditions p. 418
8.4.1.4.2 Procedure p. 418
8.4.1.5 Test Requirement p. 419
8.5 Performance requirements for Narrowband IoT p. 421
8.5.1 Performance requirements for NPUSCH format 1 p. 421
8.5.1.1 Definition and applicability p. 421
8.5.1.2 Minimum Requirement p. 421
8.5.1.3 Test Purpose p. 421
8.5.1.4 Method of test p. 422
8.5.1.4.1 Initial Conditions p. 422
8.5.1.4.2 Procedure p. 422
8.5.1.5 Test Requirement p. 422
8.5.2 ACK missed detection for NPUSCH format 2 p. 424
8.5.2.1 Definition and applicability p. 424
8.5.2.2 Minimum Requirement p. 424
8.5.2.3 Test purpose p. 424
8.5.2.4 Method of test p. 424
8.5.2.4.1 Initial Conditions p. 424
8.5.2.4.2 Procedure p. 424
8.5.2.5 Test Requirement p. 425
8.5.3 Performance requirements for NPRACH p. 426
8.5.3.1 Definition and applicability p. 426
8.5.3.2 Minimum Requirement p. 426
8.5.3.3 Test purpose p. 426
8.5.3.4 Method of test p. 426
8.5.3.4.1 Initial Conditions p. 426
8.5.3.4.2 Procedure p. 427
8.5.3.5 Test Requirement p. 427
8.6 Performance requirements for subslot-PUSCH p. 428
8.6.1 Definition and applicability p. 428
8.6.2 Minimum Requirement p. 428
8.6.3 Test Purpose p. 428
8.6.4 Method of test p. 428
8.6.4.1 Initial Conditions p. 428
8.6.4.2 Procedure p. 428
8.6.5 Test Requirement p. 429
8.7 Performance requirements for SPUCCH p. 430
8.7.1 ACK missed detection for single user SPUCCH format 1a p. 430
8.7.1.1 Definition and applicability p. 430
8.7.1.2 Minimum Requirement p. 430
8.7.1.3 Test Purpose p. 430
8.7.1.4 Method of test p. 431
8.7.1.4.1 Initial Conditions p. 431
8.7.1.4.2 Procedure p. 431
8.7.1.5 Test Requirement p. 431
8.7.2 ACK missed detection requirements for SPUCCH format 4 p. 432
8.7.2.1 Definition and applicability p. 432
8.7.2.2 Minimum Requirement p. 432
8.7.2.3 Test Purpose p. 432
8.7.2.4 Method of test p. 432
8.7.2.4.1 Initial Conditions p. 432
8.7.2.4.2 Procedure p. 432
8.7.2.5 Test Requirement p. 433
9 Void
