Content for TS 36.141 Word version: 18.4.0
3 Definitions, symbols and abbreviations
4 General test conditions and declarations
4.1 Measurement uncertainties and Test Requirements
4.2 Base station classes
4.3 Regional requirements
4.4 Selection of configurations for testing
4.5 BS Configurations
4.6 Manufacturer's declarations of regional and optional requirements
4.7 Specified frequency range and supported channel bandwidth
4.8 Format and interpretation of tests
4.9 Applicability of requirements
4.10 Test configurations for multi-carrier and/or CA operation
4.11 Applicability of test configurations
4.12 Requirements for BS capable of multi-band operation
4.13 Tests for BS capable of multi-band operation with three or more bands
...
...
3 Definitions, symbols and abbreviations p. 32
4 General test conditions and declarations p. 38
4.1 Measurement uncertainties and Test Requirements p. 38
4.1.1 General p. 38
4.1.2 Acceptable uncertainty of Test System p. 39
4.1.2.1 Measurement of transmitter p. 40
4.1.2.2 Measurement of receiver p. 41
4.1.2.3 Measurement of performance requirement p. 48
4.1.3 Interpretation of measurement results p. 54
4.2 Base station classes p. 54
4.3 Regional requirements p. 54
4.4 Selection of configurations for testing p. 57
4.5 BS Configurations p. 57
4.5.1 Transmit configurations p. 57
4.5.2 Receive configurations p. 58
4.5.3 Duplexers p. 59
4.5.4 Power supply options p. 59
4.5.5 Ancillary RF amplifiers p. 59
4.5.6 BS with integrated Iuant BS modem p. 60
4.5.7 BS using antenna arrays p. 60
4.5.7.1 Receiver tests p. 60
4.5.7.2 Transmitter tests p. 61
4.6 Manufacturer's declarations of regional and optional requirements p. 61
4.6.1 Operating band and frequency range p. 61
4.6.2 Channel bandwidth p. 62
4.6.3 Base station output power p. 62
4.6.4 Spurious emissions Category p. 62
4.6.5 Additional operating band unwanted emissions p. 62
4.6.6 Co-existence with other systems p. 63
4.6.7 Co-location with other base stations p. 63
4.6.8 Manufacturer's declarations of supported RF configurations p. 63
4.6.9 NB-IoT sub-carrier spacing p. 65
4.6.10 NB-IoT power dynamic range p. 65
4.6.11 Sub-PRB allocation p. 65
4.7 Specified frequency range and supported channel bandwidth p. 65
4.7.1 Base Station RF Bandwidth position for multi-carrier and/or CA testing p. 66
4.7.2 Aggregated Channel Bandwidth position for Contiguous CA occupied bandwidth testing p. 66
4.7.3 NB-IoT testing p. 67
4.8 Format and interpretation of tests p. 67
4.9 Applicability of requirements p. 68
4.10 Test configurations for multi-carrier and/or CA operation p. 68
4.10.1 ETC1: Contiguous spectrum operation p. 68
4.10.2 ETC2: Contiguous CA occupied bandwidth p. 69
4.10.3 ETC3: Non-contiguous spectrum operation p. 70
4.10.4 ETC4: Multi-band test configuration for full carrier allocation p. 70
4.10.5 ETC5: Multi-band test configuration with high PSD per carrier p. 71
4.10.6 ETC6: NB-IoT standalone multi-carrier operation p. 72
4.10.7 ETC7: E-UTRA and NB-IoT standalone multi-carrier operation p. 72
4.10.8 ETC8: E-UTRA and NB-IoT in-band multi-carrier operation p. 73
4.10.9 ETC9: E-UTRA and NB-IoT guard-band multi-carrier operation p. 73
4.11 Applicability of test configurations p. 74
4.12 Requirements for BS capable of multi-band operation p. 79
4.13 Tests for BS capable of multi-band operation with three or more bands p. 80
