Content for TS 36.141 Word version: 18.4.0
6 Transmitter characteristics
6.1 General
6.2 Base station output power
6.3 Output power dynamics
6.4 Transmit ON/OFF power
6.5 Transmitted signal quality
6.5.1 Frequency error
6.5.2 Error Vector Magnitude
6.5.3 Time alignment error
6.5.4 DL RS power
6.6 Unwanted emissions
6.6.1 Occupied bandwidth
6.6.2 Adjacent Channel Leakage power Ratio (ACLR)
6.6.3 Operating band unwanted emissions
6.6.4 Transmitter spurious emissions
6.7 Transmitter intermodulation
...
...
6 Transmitter characteristics p. 93
6.1 General p. 93
6.1.1 E-UTRA Test Models p. 93
6.1.1.1 E-UTRA Test Model 1.1 (E-TM1.1) p. 93
6.1.1.2 E-UTRA Test Model 1.2 (E-TM1.2) p. 95
6.1.1.3 E-UTRA Test Model 2 (E-TM2) p. 97
6.1.1.3a E-UTRA Test Model 2a (E-TM2a) p. 100
6.1.1.3b E-UTRA Test Model 2b (E-TM2b) p. 100
6.1.1.3c E-UTRA subslot TTI Test Model 2-1 (sE-TM2-1) p. 100
6.1.1.3d E-UTRA subslot TTI Test Model 2a (sE-TM2a-1) p. 102
6.1.1.3e E-UTRA slot TTI Test Model 2-2 (sE-TM2-2) p. 102
6.1.1.3f E-UTRA slot TTI Test Model 2a (sE-TM2a-2) p. 104
6.1.1.4 E-UTRA Test Model 3.1 (E-TM3.1) p. 104
6.1.1.4a E-UTRA Test Model 3.1a (E-TM3.1a) p. 105
6.1.1.4b E-UTRA Test Model 3.1b (E-TM3.1b) p. 105
6.1.1.4c E-UTRA subslot TTI Test Model 3.1 (sE-TM3.1-1) p. 106
6.1.1.4d E-UTRA subslot TTI Test Model 3.1a (sE-TM3.1a-1) p. 107
6.1.1.4e E-UTRA slot TTI Test Model 3.1 (sE-TM3.1-2) p. 108
6.1.1.4f E-UTRA slot TTI Test Model 3.1a (sE-TM3.1a-2) p. 108
6.1.1.5 E-UTRA Test Model 3.2 (E-TM3.2) p. 109
6.1.1.5a E-UTRA subslot TTI Test Model 3.2 (sE-TM3.2-1) p. 113
6.1.1.5b E-UTRA slot TTI Test Model 3.2 (sE-TM3.2-2) p. 125
6.1.1.6 E-UTRA Test Model 3.3 (E-TM3.3) p. 137
6.1.1.6a E-UTRA subslot TTI Test Model 3.3 (sE-TM3.3-1) p. 142
6.1.1.6b E-UTRA slot TTI Test Model 3.3 (sE-TM3.3-2) p. 148
6.1.2 Data content of Physical channels and Signals for E-TM p. 155
6.1.2.1 Reference signals p. 156
6.1.2.2 Primary Synchronization signal p. 156
6.1.2.3 Secondary Synchronization signal p. 156
6.1.2.4 PBCH p. 156
6.1.2.5 PCFICH p. 156
6.1.2.6 PHICH p. 156
6.1.2.7 PDCCH p. 157
6.1.2.8 PDSCH or sPDSCH p. 157
6.1.2.9 sPDCCH p. 157
6.1.3 NB-IoT Test Model p. 158
6.1.4 Data content of Physical channels and Signals for N-TM p. 158
6.1.4.1 Reference signals p. 159
6.1.4.2 Synchronization signals p. 159
6.1.4.3 NPBCH p. 159
6.1.4.4 NPDCCH p. 159
6.1.4.5 NPDSCH p. 159
6.1.5 Test Model for NB-IoT guard band operation p. 160
6.1.6 Test Model for NB-IoT in-band operation p. 160
6.2 Base station output power p. 160
6.2.1 Definition and applicability p. 160
6.2.2 Minimum Requirement p. 161
6.2.3 Test purpose p. 161
6.2.4 Method of test p. 162
6.2.4.1 Initial conditions p. 162
6.2.4.2 Procedure p. 162
6.2.5 Test Requirements p. 162
6.2.6 Home BS output power for adjacent UTRA channel protection p. 163
6.2.6.1 Definition and applicability p. 163
6.2.6.2 Minimum Requirement p. 164
6.2.6.3 Test purpose p. 164
6.2.6.4 Method of test p. 164
6.2.6.4.1 Initial conditions p. 164
6.2.6.4.2 Procedure p. 164
6.2.6.5 Test Requirements p. 165
6.2.7 Home BS output power for adjacent E-UTRA channel protection p. 165
6.2.7.1 Definition and applicability p. 165
6.2.7.2 Minimum Requirement p. 166
6.2.7.3 Test purpose p. 166
6.2.7.4 Method of test p. 166
6.2.7.4.1 Initial conditions p. 166
6.2.7.4.2 Procedure p. 167
6.2.7.5 Test Requirements p. 167
6.2.8 Home BS output power for co-channel E-UTRA protection p. 168
6.2.8.1 Definition and applicability p. 168
6.2.8.2 Minimum Requirement p. 169
6.2.8.3 Test purpose p. 169
6.2.8.4 Method of test p. 169
6.2.8.4.1 Initial conditions p. 169
6.2.8.4.2 Procedure p. 169
6.2.8.5 Test Requirements p. 170
6.3 Output power dynamics p. 170
6.3.1 RE Power control dynamic range p. 170
6.3.1.1 Definition and applicability p. 170
6.3.1.2 Minimum Requirement p. 170
6.3.1.3 Method of test p. 171
6.3.2 Total power dynamic range p. 171
6.3.2.1 Definition and applicability p. 171
6.3.2.2 Minimum Requirement p. 171
6.3.2.3 Test purpose p. 171
6.3.2.4 Method of test p. 171
6.3.2.4.1 Initial conditions p. 171
6.3.2.4.2 Procedure p. 171
6.3.2.5 Test Requirement p. 172
6.3.3 NB-IoT RB power dynamic range for in-band or guard band operation p. 172
6.3.3.1 Definition and applicability p. 172
6.3.3.2 Minimum Requirement p. 172
6.3.3.3 Test purpose p. 172
6.3.3.4 Method of test p. 172
6.3.3.5 Test Requirement p. 172
6.4 Transmit ON/OFF power p. 173
6.4.1 Transmitter OFF power p. 173
6.4.1.1 Definition and applicability p. 173
6.4.1.2 Minimum Requirement p. 173
6.4.1.3 Test purpose p. 173
6.4.1.4 Method of test p. 173
6.4.1.5 Test requirement p. 173
6.4.2 Transmitter transient period p. 173
6.4.2.1 Definition and applicability p. 173
6.4.2.2 Minimum Requirement p. 174
6.4.2.3 Test purpose p. 174
6.4.2.4 Method of test p. 174
6.4.2.4.1 Initial conditions p. 174
6.4.2.4.2 Procedure p. 174
6.4.2.5 Test requirement p. 175
6.5 Transmitted signal quality p. 175
6.5.1 Frequency error p. 175
6.5.1.1 Definition and applicability p. 175
6.5.1.2 Minimum Requirement p. 175
6.5.1.3 Test purpose p. 175
6.5.1.4 Method of test p. 175
6.5.1.5 Test requirement p. 175
6.5.2 Error Vector Magnitude p. 176
6.5.2.1 Definition and applicability p. 176
6.5.2.2 Minimum Requirement p. 176
6.5.2.3 Test purpose p. 176
6.5.2.4 Method of test p. 176
6.5.2.4.1 Initial conditions p. 176
6.5.2.4.2 Procedure p. 176
6.5.2.5 Test requirement p. 177
6.5.3 Time alignment error p. 178
6.5.3.1 Definition and applicability p. 178
6.5.3.2 Minimum Requirement p. 178
6.5.3.3 Test Purpose p. 178
6.5.3.4 Method of Test p. 178
6.5.3.4.1 Initial Conditions p. 178
6.5.3.4.2 Procedure p. 179
6.5.3.5 Test Requirement p. 179
6.5.4 DL RS power p. 180
6.5.4.1 Definition and applicability p. 180
6.5.4.2 Minimum Requirement p. 180
6.5.4.3 Test purpose p. 180
6.5.4.4 Method of test p. 180
6.5.4.4.1 Initial conditions p. 180
6.5.4.4.2 Procedure p. 180
6.5.4.5 Test requirement p. 180
6.6 Unwanted emissions p. 181
6.6.1 Occupied bandwidth p. 181
6.6.1.1 Definition and applicability p. 181
6.6.1.2 Minimum Requirements p. 181
6.6.1.3 Test purpose p. 181
6.6.1.4 Method of test p. 181
6.6.1.4.1 Initial conditions p. 181
6.6.1.4.2 Procedure p. 182
6.6.1.5 Test requirements p. 183
6.6.2 Adjacent Channel Leakage power Ratio (ACLR) p. 183
6.6.2.1 Definition and applicability p. 183
6.6.2.2 Minimum Requirement p. 183
6.6.2.3 Test purpose p. 184
6.6.2.4 Method of test p. 184
6.6.2.4.1 Initial conditions p. 184
6.6.2.4.2 Procedure p. 184
6.6.2.5 Test Requirement p. 185
6.6.2.6 Cumulative ACLR test requirement in non-contiguous spectrum p. 187
6.6.3 Operating band unwanted emissions p. 189
6.6.3.1 Definition and applicability p. 189
6.6.3.2 Minimum Requirement p. 190
6.6.3.3 Test purpose p. 190
6.6.3.4 Method of test p. 190
6.6.3.4.1 Initial conditions p. 190
6.6.3.4.2 Procedure p. 191
6.6.3.5 Test requirement p. 191
6.6.3.5.1 Test requirements for Wide Area BS (Category A) p. 192
6.6.3.5.2 Test requirements for Wide Area BS (Category B) p. 197
6.6.3.5.2A Test requirements for Local Area BS (Category A and B) p. 204
6.6.3.5.2B Test requirements for Home BS (Category A and B) p. 207
6.6.3.5.2C Test requirements for Medium Range BS (Category A and B) p. 208
6.6.3.5.2D Minimum requirements for Local Area and Medium Range BS in Band 46 (Category A and B) p. 213
6.6.3.5.2E Minimum requirements for stand-alone NB-IoT Wide Area BS p. 214
6.6.3.5.2F Minimum requirements for stand-alone NB-IoT Local Area BS p. 215
6.6.3.5.2G Minimum requirements for stand-alone NB-IoT Home BS p. 216
6.6.3.5.2H Minimum requirements for stand-alone NB-IoT Medium Range BS p. 217
6.6.3.5.3 Additional requirements p. 218
6.6.4 Transmitter spurious emissions p. 223
6.6.4.1 Definition and applicability p. 223
6.6.4.2 Minimum Requirements p. 223
6.6.4.3 Test Purpose p. 223
6.6.4.4 Method of Test p. 223
6.6.4.4.1 Initial conditions p. 223
6.6.4.4.2 Procedure p. 224
6.6.4.5 Test requirements p. 224
6.6.4.5.1 Spurious emissions (Category A) p. 225
6.6.4.5.2 Spurious emissions (Category B) p. 225
6.6.4.5.3 Protection of the BS receiver of own or different BS p. 225
6.6.4.5.4 Co-existence with other systems in the same geographical area p. 226
6.6.4.5.5 Co-location with other base stations p. 243
6.7 Transmitter intermodulation p. 258
6.7.1 Definition and applicability p. 258
6.7.2 Minimum Requirement p. 259
6.7.2A Additional requirement for Band 41 p. 259
6.7.3 Test purpose p. 259
6.7.4 Method of test p. 259
6.7.4.1 Initial conditions p. 259
6.7.4.2 Procedures p. 259
6.7.5 Test Requirements p. 260
6.7.6 Additional test requirements for Band 41 p. 261
