B.1.1  Conditions for measurements of intra-frequency E-UTRAN cells for cell re-selection  p. 4273

B.1.2  Conditions for measurements of inter-frequency E-UTRAN cells for cell re-selection  p. 4273

B.1.3  Conditions for measurements of intra-frequency E-UTRAN cells for cell re-selection for UE Category M1  p. 4273

B.1.4  Conditions for measurements of intra-frequency NB-IoT cells for cell re-selection for UE Category NB1  p. 4275

B.1.5  Conditions for measurements of inter-frequency NB-IoT cells for cell re-selection for UE Category NB1  p. 4276

B.1.6  Conditions for measurements of intra-frequency E-UTRAN cells for cell re-selection for UE Category 1bis  p. 4276

B.1.7  Conditions for measurements of E-UTRAN cells for cell re-selection for UE Category M2  p. 4276

B.1.8  Conditions for measurements of inter-frequency E-UTRAN cells for cell re-selection for UE Category M1  p. 4279

B.1.9  Conditions for measurements of intra-frequency E-UTRAN cells for cell re-selection for UE Category M1 for satellite access  p. 4279

B.1.10  Conditions for measurements of intra-frequency NB-IoT cells for cell re-selection for UE Category NB1 and NB2 for satellite access  p. 4280

B.2.1  Conditions for E-UTRAN intra-frequency measurements  p. 4281

B.2.2  Conditions for E-UTRAN intra-frequency measurements with autonomous gaps  p. 4281

B.2.3  Conditions for E-UTRAN inter-frequency measurements  p. 4282

B.2.4  Conditions for E-UTRAN inter-frequency measurements with autonomous gaps  p. 4282

B.2.5  Conditions for E-UTRAN OTDOA intra-frequency RSTD Measurements  p. 4282

B.2.6  Conditions for E-UTRAN OTDOA inter-frequency RSTD Measurements  p. 4283

B.2.7  Conditions for Measurements of the secondary component carrier with deactivated SCell  p. 4283

B.2.8  Conditions for E-UTRAN Intra-Frequency Measurements under Time Domain Measurement Resource Restriction  p. 4283

B.2.9  Conditions for E-UTRAN Intra-Frequency Measurements under Time Domain Measurement Resource Restriction with CRS Assistance Information  p. 4284

B.2.10  Conditions for E-UTRAN intra-frequency discovery signal measurements  p. 4285

B.2.11  Conditions for E-UTRAN inter-frequency discovery signal measurements  p. 4285

B.2.12  Conditions for E-UTRAN intra-frequency discovery signal measurements under operation with frame structure 3  p. 4286

B.2.13  Conditions for E-UTRAN inter-frequency discovery signal measurements under operation with frame structure 3  p. 4287

B.2.14  Conditions for E-UTRAN intra-frequency measurements by UE Category M1  p. 4287

B.2.15  Conditions for NB-IoT intra-frequency measurements by UE Category NB1  p. 4289

B.2.16  Conditions for NB-IoT intra-frequency RSTD measurements by UE Category NB1  p. 4290

B.2.17  Conditions for NB-IoT inter-frequency RSTD measurements by UE Category NB1  p. 4290

B.2.18  Conditions for E-UTRAN inter-frequency measurements by UE Category M1  p. 4291

B.2.19  Conditions for E-UTRAN measurements by UE Category M2  p. 4292

B.2.20  Conditions for E-UTRAN inter-frequency RSTD measurements by UE Category M1  p. 4293

B.2.21  Conditions for E-UTRAN inter-frequency RSTD measurements by UE Category M2  p. 4294

B.2.22  Conditions for E-UTRAN intra-frequency RSTD measurements by UE Category M1  p. 4294

B.2.23  Conditions for E-UTRAN intra-frequency RSTD measurements by UE Category M2  p. 4295

B.2.24  Conditions for intra-frequency neighbour cell measurements of NB-IoT cells for UE Category NB1  p. 4295

B.2.25  Conditions for inter-frequency neighbour cell measurements of NB-IoT cells for UE Category NB1  p. 4296

B.2.26  Conditions for E-UTRAN intra-frequency measurements by UE Category M1 for satellite access  p. 4296

B.2.27  Conditions for NB-IoT intra-frequency measurements by UE Category NB1 and NB2 for satellite access  p. 4297

B.3.1  Conditions for intra-frequency RSRP and RSRQ Accuracy Requirements  p. 4297

B.3.2  Void

B.3.3  Conditions for inter-frequency RSRP and RSRQ Accuracy Requirements  p. 4298

B.3.4  Conditions for inter-frequency relative RSRP and RSRQ Accuracy Requirements  p. 4298

B.3.5  Conditions for UE Rx - Tx time difference  p. 4298

B.3.6  Conditions for intra-frequency Reference Signal Time Difference (RSTD) measurements  p. 4298

B.3.7  Conditions for inter-frequency RSTD measurements  p. 4298

B.3.8  Conditions for Intra-Frequency Relative RSRP Accuracy Requirements  p. 4299

B.3.9  Conditions for Intra-Frequency Absolute RSRP and RSRQ Accuracy Requirements under Time Domain Measurement Resource Restriction  p. 4299

B.3.10  Conditions for Intra-Frequency Relative RSRP Accuracy Requirements under Time Domain Measurement Resource Restriction  p. 4299

B.3.11  Conditions for Intra-Frequency Absolute RSRP and RSRQ Accuracy Requirements under Time Domain Measurement Resource Restriction with CRS Assistance Information  p. 4299

B.3.12  Conditions for Intra-Frequency Relative RSRP Accuracy Requirements under Time Domain Measurement Resource Restriction with CRS Assistance Information  p. 4300

B.3.13  Conditions for UE Rx-Tx Time Difference Measurement under Time Domain Measurement Resource Restriction with CRS Assistance Information  p. 4300

B.3.14  Conditions for Intra-Frequency Absolute Discovery Signal Measurement Accuracy Requirements  p. 4300

B.3.15  Conditions for Intra-Frequency Relative Discovery Signal Measurement Accuracy Requirements  p. 4301

B.3.16  Conditions for Inter-Frequency Absolute Discovery Signal Measurement Accuracy Requirements  p. 4301

B.3.17  Conditions for Inter-Frequency Relative Discovery Signal Measurement Accuracy Requirements  p. 4302

B.3.18  Conditions for Intra-frequency Absolute RS-SINR Accuracy Requirements  p. 4302

B.3.19  Conditions for Inter-frequency Absolute RS-SINR Accuracy Requirements  p. 4302

B.3.20  Conditions for Inter-frequency Relative RS-SINR Accuracy Requirements  p. 4302

B.3.21  Conditions for Intra-Frequency Absolute Accuracy Requirements for Measurements under Operation with Frame Structure 3  p. 4302

B.3.22  Conditions for Intra-Frequency Relative Accuracy Requirements for Measurements under Operation with Frame Structure 3  p. 4303

B.3.23  Conditions for Inter-Frequency Absolute Accuracy Requirements for Measurements under Operation with Frame Structure 3  p. 4304

B.3.24  Conditions for Inter-Frequency Relative Accuracy Requirements for Measurements under Operation with Frame Structure 3  p. 4304

B.3.25  Conditions for NB-IoT intra-frequency Absolute NRSRP and NRSRQ Accuracy Requirements for UE Category NB1  p. 4305

B.3.26  Conditions for NB-IoT inter-frequency Absolute NRSRP and NRSRQ Accuracy Requirements for UE Category NB1  p. 4305

B.3.27  Conditions for intra-frequency RSRP and RSRQ Accuracy Requirements for Category 0  p. 4305

B.3.28  Conditions for Intra-Frequency Relative RSRP Accuracy Requirements for Category 0  p. 4306

B.3.29  Conditions for intra-frequency Reference Signal Time Difference (RSTD) measurements for NB1  p. 4306

B.3.30  Conditions for inter-frequency Reference Signal Time Difference (RSTD) measurements for NB1  p. 4306

B.3.31  Conditions for inter-frequency Reference Signal Time Difference (RSTD) measurements for Cat M1  p. 4306

B.3.32  Conditions for inter-frequency Reference Signal Time Difference (RSTD) measurements for Cat M2  p. 4306

B.3.33  Conditions for intra-frequency Reference Signal Time Difference (RSTD) measurements for Cat M1  p. 4307

B.3.34  Conditions for intra-frequency Reference Signal Time Difference (RSTD) measurements for Cat M2  p. 4307

B.4.1  General  p. 4307

B.4.2  Receiver sensitivity relaxation for UE supporting CA  p. 4307

B.4.3  Receiver sensitivity relaxation for UE configured with CA  p. 4307

B.5.1  Conditions for S-RSRP Accuracy Requirements  p. 4308

B.5.2  Conditions for Relative S-RSRP Accuracy Requirements  p. 4308

B.5.3  Conditions for Selection/Reselection to Intra-frequency SyncRef UE  p. 4309

B.5.4  Conditions for SD-RSRP Accuracy Requirements  p. 4309

B.5.5  Conditions for Relative SD-RSRP Accuracy Requirements  p. 4310

B.6.1  Test parameters for GNSS signals  p. 4310

B.6.2  Conditions for Absolute S-RSRP Accuracy Requirements  p. 4310

B.6.3  Conditions for Relative S-RSRP Accuracy Requirements  p. 4310

B.6.4  Conditions for Selection/Reselection to Intra-frequency SyncRef UE  p. 4311

B.6.5  Conditions for Absolute PSSCH-RSRP Accuracy Requirements  p. 4311

B.7.1  Conditions for Maximum Timing Difference Between Uplink and Downlink Carriers in Carrier Aggregation  p. 4312