Content for TS 36.133 Word version: 18.6.0
4 E-UTRAN RRC_IDLE state mobility
4.1 Cell Selection
4.2 Cell Re-selection
4.3 Minimization of Drive Tests (MDT)
4.4 MBSFN Measurements
4.5 Proximity-based Services
4.6 Cell Selection and Re-selection Requirements for UE category NB1
4.6A Cell Selection and Re-selection Requirements for UE category NB-IoT for Satellite Access
4.7 Cell Selection and Re-selection Requirements for UE category M1
4.7A Cell Selection and Re-selection Requirements for UE category M1 for Satellite Access
4.8 Idle State Positioning Measurement Requirements for UE category NB1
4.9 Idle Mode CA Measurement
4A E-UTRAN RRC_INACTIVE state mobility
4A.1 Cell Re-selection
4A.2 Requirements for UE Category M1
...
...
4 E-UTRAN RRC_IDLE state mobility p. 129
4.1 Cell Selection p. 129
4.2 Cell Re-selection p. 129
4.2.1 Introduction p. 129
4.2.2 Requirements p. 130
4.2.2.1 Measurement and evaluation of serving cell p. 131
4.2.2.2 Void
4.2.2.3 Measurements of intra-frequency E-UTRAN cells p. 132
4.2.2.4 Measurements of inter-frequency E-UTRAN cells p. 134
4.2.2.5 Measurements of inter-RAT cells p. 136
4.2.2.5.1 Measurements of UTRAN FDD cells p. 136
4.2.2.5.2 Measurements of UTRAN TDD cells p. 138
4.2.2.5.3 Measurements of GSM cells p. 139
4.2.2.5.4 Measurements of HRPD cells p. 140
4.2.2.5.5 Measurements of cdma2000 1X p. 141
4.2.2.5.6 Measurements of NR cells p. 142
4.2.2.5.7 Measurements of NR cells subject to CCA p. 145
4.2.2.5.8 Measurements of NR cells for RedCap p. 147
4.2.2.6 Evaluation of cell re-selection criteria p. 149
4.2.2.7 Maximum interruption in paging reception p. 149
4.2.2.8 Void
4.2.2.9 UE measurement capability p. 150
4.2.2.9a UE measurement capability (Increased UE carrier monitoring) p. 151
4.2.2.10 Reselection to CSG cells p. 151
4.2.2.10.1 Reselection from a non CSG to an inter-frequency CSG cell p. 152
4.2.2.10.2 Reselection from a non CSG to an inter-RAT UTRAN FDD CSG cell p. 152
4.2.2.11 Void
4.2.2.12 Void
4.2.2.13 Void
4.2.2.14 UE measurement capability for RedCap p. 153
4.3 Minimization of Drive Tests (MDT) p. 154
4.3.1 Introduction p. 154
4.3.2 Measurements p. 154
4.3.2.1 Requirements p. 154
4.3.3 Relative Time Stamp Accuracy p. 154
4.3.3.1 Requirements p. 154
4.3.4 Relative Time Stamp Accuracy for RRC Connection Establishment Failure Log Reporting p. 155
4.3.4.1 Requirements p. 155
4.3.5 Relative Time Stamp Accuracy for Radio Link Failure and Handover Failure Log Reporting p. 155
4.4 MBSFN Measurements p. 155
4.4.1 Introduction p. 155
4.4.2 MBSFN RSRP measurements p. 155
4.4.3 MBSFN RSRQ measurements p. 156
4.4.4 MCH BLER measurements p. 156
4.5 Proximity-based Services p. 156
4.5.1 Introduction p. 156
4.5.2 Requirements p. 156
4.6 Cell Selection and Re-selection Requirements for UE category NB1 p. 158
4.6.1 Cell Selection p. 158
4.6.2 Cell Re-selection p. 158
4.6.2.1 Measurement and evaluation of serving NB-IoT cell for UE category NB1 in normal coverage p. 158
4.6.2.1A Measurement and evaluation of serving NB-IoT cell for HD-FDD UE category NB1 in normal coverage when configured with WUS p. 159
4.6.2.2 Measurements of intra-frequency NB-IoT cells for UE category NB1 in normal coverage p. 160
4.6.2.3 Measurement and evaluation of serving NB-IoT cell for UE category NB1 in enhanced coverage p. 161
4.6.2.3A Measurement and evaluation of serving NB-IoT cell for HD-FDD UE category NB1 in enhanced coverage when configured with WUS p. 163
4.6.2.4 Measurements of intra-frequency NB-IoT cells for UE category NB1 in enhanced coverage p. 164
4.6.2.5 Measurements of inter-frequency NB cells for UE category NB1 in normal coverage p. 165
4.6.2.6 Measurements of inter-frequency NB-IoT cells for UE category NB1 in enhanced coverage p. 166
4.6.2.7 Maximum interruption in paging reception in normal coverage p. 168
4.6.2.7A Maximum interruption in paging reception in enhanced coverage p. 168
4.6.2.8 UE measurement capability p. 168
4.6.2.9 WUS receptions for NB1 p. 168
4.6.3 Requirements for transmission using preconfigured uplink resources for UE category NB1 p. 169
4.6A Cell Selection and Re-selection Requirements for UE category NB-IoT for Satellite Access p. 170
4.6A.1 Cell Selection p. 170
4.6A.2 Cell Re-selection for UE category NB-IoT for Satellite Access p. 170
4.6A.2.1 Measurement and evaluation of serving NB-IoT cell for UE category NB1 in normal coverage p. 170
4.6A.2.1A Measurement and evaluation of serving NB-IoT cell for HD-FDD UE category NB1 in normal coverage when configured with WUS p. 172
4.6A.2.2 Measurements of intra-frequency NB-IoT cells for UE category NB1 in normal coverage p. 173
4.6A.2.3 Measurement and evaluation of serving NB-IoT cell for UE category NB1 in enhanced coverage p. 175
4.6A.2.3A Measurement and evaluation of serving NB-IoT cell for HD-FDD UE category NB1 in enhanced coverage when configured with WUS p. 177
4.6A.2.4 Measurements of intra-frequency NB-IoT cells for UE category NB1 in enhanced coverage p. 178
4.6A.2.5 Measurements of inter-frequency NB cells for UE category NB1 in normal coverage p. 180
4.6A.2.6 Measurements of inter-frequency NB-IoT cells for UE category NB1 in enhanced coverage p. 182
4.6A.2.7 Maximum interruption in paging reception in normal coverage p. 184
4.6A.2.7A Maximum interruption in paging reception in enhanced coverage p. 184
4.6A.2.8 UE measurement capability p. 185
4.6A.2.9 WUS receptions for NB1 p. 185
4.6A.3 Requirements for transmission using preconfigured uplink resources for UE category NB-IoT for Satellite Access p. 185
4.7 Cell Selection and Re-selection Requirements for UE category M1 p. 186
4.7.1 Cell Selection p. 186
4.7.2 Cell Re-selection p. 186
4.7.2.1 Cell Re-selection requirements for UE category M1 in normal coverage p. 186
4.7.2.1.1 Measurement and evaluation of serving cell for UE category M1 in normal coverage p. 186
4.7.2.1.1A Relaxed measurement and evaluation of serving cell for UE category M1 in normal coverage p. 187
4.7.2.1.2 Measurements of intra-frequency cells for UE category M1 in normal coverage p. 188
4.7.2.1.3 Measurements of inter-frequency cells for UE category M1 in normal coverage p. 189
4.7.2.1.4 Maximum allowed layers for multiple monitoring for UE category M1 in normal coverage p. 191
4.7.2.1.5 Maximum interruption in paging reception for Category M1 UEs in normal coverage p. 191
4.7.2.2 Cell Re-selection requirements for UE category M1 in enhanced coverage p. 192
4.7.2.2.1 Measurement and evaluation of serving cell for UE category M1 in enhanced coverage p. 192
4.7.2.2.1A Relaxed measurement and evaluation of serving cell for UE category M1 in enhaned coverage p. 193
4.7.2.2.2 Measurements of intra-frequency cells for UE category M1 in enhanced coverage p. 194
4.7.2.2.3 Measurements of inter-frequency cells for UE category M1 in enhanced coverage p. 197
4.7.2.2.4 Maximum allowed layers for multiple monitoring for UE category M1 in enhanced coverage p. 198
4.7.2.2.5 Maximum interruption in paging reception for Category M1 UEs in enhanced coverage p. 199
4.7.2.3 WUS receptions for UE category M1 p. 199
4.7.3 Channel quality report for UE Category M1 in idle mode p. 199
4.7.4 Requirements for transmission using preconfigured uplink resources for UE category M1 p. 200
4.7A Cell Selection and Re-selection Requirements for UE category M1 for Satellite Access p. 201
4.7A.1 Cell Selection p. 202
4.7A.2 Cell Re-selection for UE category M1 for Satellite Access p. 202
4.7A.2.1 Cell Re-selection requirements for UE category M1 in normal coverage p. 202
4.7A.2.1.1 Measurement and evaluation of serving cell for UE category M1 in normal coverage p. 202
4.7A.2.1.1A Relaxed measurement and evaluation of serving cell for UE category M1 in normal coverage p. 204
4.7A.2.1.2 Measurements of intra-frequency cells for UE category M1 in normal coverage p. 206
4.7A.2.1.3 Measurements of inter-frequency cells for UE category M1 in normal coverage p. 208
4.7A.2.1.4 Maximum allowed layers for multiple monitoring for UE category M1 in normal coverage p. 210
4.7A.2.1.5 Maximum interruption in paging reception for Category M1 UEs in normal coverage p. 211
4.7A.2.2 Cell Re-selection requirements for UE category M1 in enhanced coverage p. 211
4.7A.2.2.1 Measurement and evaluation of serving cell for UE category M1 in enhanced coverage p. 211
4.7A.2.2.1A Relaxed measurement and evaluation of serving cell for UE category M1 in enhaned coverage p. 213
4.7A.2.2.2 Measurements of intra-frequency cells for UE category M1 in enhanced coverage p. 215
4.7A.2.2.3 Measurements of inter-frequency cells for UE category M1 in enhanced coverage p. 218
4.7A.2.2.4 Maximum allowed layers for multiple monitoring for UE category M1 in enhanced coverage p. 220
4.7A.2.2.5 Maximum interruption in paging reception for Category M1 UEs in enhanced coverage p. 221
4.7A.2.3 WUS receptions for UE category M1 p. 221
4.7A.3 Channel quality report for UE Category M1 in idle mode for Satellite Access p. 221
4.7A.4 Requirements for transmission using preconfigured uplink resources for UE category M1 for Satellite Access p. 222
4.8 Idle State Positioning Measurement Requirements for UE category NB1 p. 223
4.8.1 OTDOA Intra-Frequency RSTD Measurements for UE category NB1 for normal coverage p. 223
4.8.2 OTDOA Intra-Frequency RSTD Measurements for UE category NB1 for enhanced coverage p. 225
4.8.3 OTDOA Inter-Frequency RSTD Measurements for UE category NB1 for normal coverage p. 227
4.8.4 OTDOA Inter-Frequency RSTD Measurements for UE category NB1 for enhanced coverage p. 229
4.8.5 Intra-Frequency E-CID NRSRP and NRSRQ Measurements for UE category NB2 for normal coverage p. 231
4.8.6 Intra-Frequency E-CID NRSRP and NRSRQ Measurements for UE category NB2 for enhanced coverage p. 232
4.8.7 Inter-Frequency E-CID NRSRP and NRSRQ Measurements for UE category NB2 for normal coverage p. 234
4.8.8 Inter-Frequency E-CID NRSRP and NRSRQ Measurements for UE category NB2 for enhanced coverage p. 235
4.9 Idle Mode CA Measurement p. 237
4A E-UTRAN RRC_INACTIVE state mobility p. 239
4A.1 Cell Re-selection p. 239
4A.1.1 Introduction p. 240
4A.1.2 Requirements p. 240
4A.1.2.1 UE measurement capability p. 240
4A.1.2.2 Measurement and evaluation of serving cell p. 240
4A.1.2.3 Measurements of intra-frequency E-UTRAN cells p. 240
4A.1.2.4 Measurements of inter-frequency E-UTRAN cells p. 240
4A.1.2.5 Evaluation of cell re-selection criteria p. 240
4A.1.2.6 Maximum interruption in paging reception p. 240
4A.1.2.7 Measurements of inter-RAT NR cells p. 240
4A.1.2.8 UE measurement capability for RedCap p. 240
4A.1.2.9 Measurements of inter-RAT NR cells for RedCap p. 240
4A.2 Requirements for UE Category M1 p. 241
4A.2.1 Introduction p. 241
4A.2.2 Cell Selection p. 241
4A.2.3 Cell Reselection p. 241
4A.2.3.1 Cell Re-selection requirements for UE category M1 in normal coverage p. 241
4A.2.3.1.1 Measurement and evaluation of serving cell for UE category M1 in normal coverage p. 241
4A.2.3.1.2 Measurements of intra-frequency cells for UE category M1 in normal coverage p. 242
4A.2.3.1.3 Measurements of inter-frequency cells for UE category M1 in normal coverage p. 242
4A.2.3.1.4 Maximum allowed layers for multiple monitoring for UE category M1 in normal coverage p. 242
4A.2.3.1.5 Maximum interruption in paging reception for Category M1 UEs in normal coverage p. 242
4A.2.4 Channel quality report for UE Category M1 in idle mode p. 244
