Content for TS 36.101 Word version: 18.6.0
1…
3…
5…
6…
6.3…
6.5
6.6…
7…
8…
8.2.2…
8.3…
8.4…
8.5…
8.7…
8.9…
8.11…
8.13…
9…
9.3
9.4
9.5…
10…
11…
12…
14…
A…
B…
C…
9 Reporting of Channel State Information
9.1 General
9.2 CQI reporting definition under AWGN conditions
...
...
9 Reporting of Channel State Information p. 1288
9.1 General p. 1288
9.1.1 Applicability of requirements p. 1288
9.1.1.1 Applicability of requirements for different channel bandwidths p. 1288
9.1.1.2 Applicability and test rules for different CA configurations and bandwidth combination sets p. 1288
9.1.1.2A Applicability and test rules for different TDD-FDD CA configurations and bandwidth combination sets p. 1289
9.1.1.3 Test coverage for different number of componenet carriers p. 1290
9.1.1.4 Applicability of performance requirements for 4Rx capable UEs p. 1290
9.1.1.4.1 Applicability rule and antenna connection for single carrier tests with 2Rx p. 1290
9.1.1.4.2 Applicability rule and antenna connection for CA tests with 2Rx p. 1292
9.1.1.4.3 Applicability rule and antenna connection for single carrier tests with 4Rx p. 1293
9.1.1.5 Applicability of requirements for UEs supporting coverage enhancement p. 1293
9.2 CQI reporting definition under AWGN conditions p. 1293
9.2.1 Minimum requirement PUCCH 1-0 (Cell-Specific Reference Symbols) p. 1293
9.2.1.1 FDD p. 1293
9.2.1.2 TDD p. 1294
9.2.1.3 FDD (CSI measurements in case two CSI subframe sets are configured) p. 1295
9.2.1.4 TDD (CSI measurements in case two CSI subframe sets are configured) p. 1298
9.2.1.5 FDD (CSI measurements in case two CSI subframe sets are configured and with CRS assistance information) p. 1301
9.2.1.6 TDD (CSI measurements in case two CSI subframe sets are configured and with CRS assistance information) p. 1304
9.2.1.7 FDD (Modulation and TBS index Table 2 and 4-bit CQI Table 2 are used) p. 1307
9.2.1.8 TDD (Modulation and TBS index Table 2 and 4-bit CQI Table 2 are used) p. 1308
9.2.1.9 FDD (Modulation and TBS index Table 3 and 4-bit CQI Table 4 are used) p. 1308
9.2.1.10 TDD (Modulation and TBS index Table 3 and 4-bit CQI Table 4 are used) p. 1309
9.2.2 Minimum requirement PUCCH 1-1 (Cell-Specific Reference Symbols) p. 1310
9.2.2.1 FDD p. 1310
9.2.2.2 TDD p. 1311
9.2.3 Minimum requirement PUCCH 1-1 (CSI Reference Symbols) p. 1312
9.2.3.1 FDD p. 1312
9.2.3.1A FDD (With channelMeasRestriction configured) p. 1313
9.2.3.2 TDD p. 1314
9.2.3.2A TDD (With channelMeasRestriction configured) p. 1315
9.2.4 Minimum requirement PUCCH 1-1 (With Single CSI Process) p. 1316
9.2.4.1 FDD p. 1317
9.2.4.1A FDD (With interferenceMeasRestriction configured) p. 1319
9.2.4.2 TDD p. 1322
9.2.4.2A TDD (With interferenceMeasRestriction configured) p. 1325
9.2.5 Minimum requirement PUCCH 1-1 (when csi-SubframeSet -r12 and EIMTA-MainConfigServCell-r12 are configured) p. 1328
9.2.6 Minimum requirement PUSCH 3-0 (Cell-Specific Reference Symbols) p. 1331
9.2.6.1 Frame structure type 3 with FDD Pcell p. 1331
9.2.6.2 Frame structure type 3 with TDD Pcell p. 1333
9.2.7 Minimum requirement PUSCH 3-1 (CSI Reference Symbol) p. 1335
