Content for TS 25.141 Word version: 18.0.0
6 Transmitter p. 52
6.1 General p. 52
6.1.1 Test Models p. 53
6.1.1.1 Test Model 1 - TM1 p. 53
6.1.1.2 Test Model 2 - TM2 p. 56
6.1.1.3 Test Model 3 - TM3 p. 56
6.1.1.4 Test Model 4 - TM4 p. 57
6.1.1.4A Test Model 5 - TM5 |R5| p. 58
6.1.1.4B Test Model 6 - TM6 |R7| p. 59
6.1.1.5 DPCH Structure of the Downlink Test Models p. 61
6.1.1.6 Common channel Structure of the Downlink Test Models p. 62
6.1.1.6.1 P-CCPCH p. 62
6.1.1.6.2 PICH p. 62
6.1.1.6.3 Primary scrambling code and SCH p. 62
6.1.1.6.4 S-CCPCH containing PCH p. 62
6.1.1.7 HS-PDSCH Structure of the Downlink TM5 |R5| p. 62
6.1.1.8 HS-SCCH Structure of the Downlink Test Models 5 and 6 |R5| p. 63
6.1.1.9 HS-PDSCH Structure of the Downlink TM6 |R7| p. 63
6.2 Base station output power p. 63
6.2.1 Base station maximum output power p. 63
6.2.1.1 Definition and applicability p. 63
6.2.1.2 Minimum Requirement p. 63
6.2.1.3 Test purpose p. 63
6.2.1.4 Method of test p. 64
6.2.1.4.1 Initial conditions p. 64
6.2.1.4.2 Procedure p. 64
6.2.1.5 Test Requirements p. 64
6.2.2 Primary CPICH power accuracy p. 64
6.2.2.1 Definition and applicability p. 64
6.2.2.2 Minimum Requirement p. 64
6.2.2.3 Test purpose p. 65
6.2.2.4 Method of test p. 65
6.2.2.4.1 Initial conditions p. 65
6.2.2.4.2 Procedure p. 65
6.2.2.5 Test Requirement p. 65
6.2.3 Secondary CPICH power offset accuracy |R10| p. 65
6.2.3.1 Definition and applicability p. 65
6.2.3.2 Minimum Requirement p. 65
6.2.3.3 Test purpose p. 66
6.2.3.4 Method of test for MIMO mode p. 66
6.2.3.4.1 Initial conditions p. 66
6.2.3.4.2 Procedure p. 66
6.2.3.4A Method of test for MIMO mode with four transmit antennas |R11| p. 66
6.2.3.4A.1 Initial conditions p. 66
6.2.3.4A.2 Procedure p. 66
6.2.3.5 Test Requirement for MIMO mode p. 67
6.2.3.5A Test Requirement for MIMO mode with four transmit antennas |R11| p. 67
6.3 Frequency error p. 67
6.3.1 Definition and applicability p. 67
6.3.2 Minimum Requirement p. 67
6.3.3 Test purpose p. 67
6.3.4 Method of test p. 67
6.3.5 Test requirement p. 67
6.4 Output power dynamics p. 68
6.4.1 Inner loop power control p. 68
6.4.2 Power control steps p. 68
6.4.2.1 Definition and applicability p. 68
6.4.2.2 Minimum Requirement p. 68
6.4.2.3 Test purpose p. 68
6.4.2.4 Method of test p. 68
6.4.2.4.1 Initial conditions p. 68
6.4.2.4.2 Procedure p. 69
6.4.2.5 Test requirement p. 69
6.4.3 Power control dynamic range p. 69
6.4.3.1 Definition and applicability p. 69
6.4.3.2 Minimum Requirement p. 70
6.4.3.3 Test purpose p. 70
6.4.3.4 Method of test p. 70
6.4.3.4.1 Initial conditions p. 70
6.4.3.4.2 Procedure p. 70
6.4.3.5 Test requirement p. 70
6.4.4 Total power dynamic range p. 70
6.4.4.1 Definition and applicability p. 70
6.4.4.2 Minimum Requirement p. 70
6.4.4.3 Test purpose p. 71
6.4.4.4 Method of test p. 71
6.4.4.5 Test requirement p. 71
6.4.5 IPDL time mask |R4| p. 71
6.4.5.1 Definition and applicability p. 71
6.4.5.2 Minimum Requirement p. 71
6.4.5.3 Test purpose p. 71
6.4.5.4 Method of test p. 72
6.4.5.4.1 Initial conditions p. 72
6.4.5.4.2 Procedure p. 72
6.4.5.5 Test Requirements p. 72
6.4.6 Home base station output power for adjacent channel protection |R8| p. 73
6.4.6.1 Definition and applicability p. 73
6.4.6.2 Minimum Requirement p. 73
6.4.6.3 Test purpose p. 73
6.4.6.4 Method of test p. 74
6.4.6.4.1 Initial conditions p. 74
6.4.6.4.2 Procedure p. 74
6.4.6.5 Test Requirements p. 74
6.5 Output RF spectrum emissions p. 75
6.5.1 Occupied bandwidth p. 75
6.5.1.1 Definition and applicability p. 75
6.5.1.2 Minimum Requirements p. 75
6.5.1.3 Test purpose p. 75
6.5.1.4 Method of test p. 75
6.5.1.4.1 Initial conditions p. 75
6.5.1.4.2 Procedure p. 75
6.5.1.5 Test requirements p. 76
6.5.2 Out of band emission p. 76
6.5.2.1 Spectrum emission mask p. 76
6.5.2.1.1 Definitions and applicability p. 76
6.5.2.1.2 Minimum Requirements p. 76
6.5.2.1.3 Test purpose p. 76
6.5.2.1.4 Method of test p. 76
6.5.2.1.4.1 Initial conditions p. 76
6.5.2.1.4.2 Procedures p. 77
6.5.2.1.5 Test requirements p. 77
6.5.2.2 Adjacent Channel Leakage power Ratio (ACLR) p. 85
6.5.2.2.1 Definition and applicability p. 85
6.5.2.2.2 Minimum Requirement p. 86
6.5.2.2.3 Test purpose p. 86
6.5.2.2.4 Method of test p. 86
6.5.2.2.4.1 Initial conditions p. 86
6.5.2.2.4.2 Procedure p. 86
6.5.2.2.5 Test Requirement p. 86
6.5.2.2.6 Cumulative ACLR test requirement in non-contiguous spectrum or multiple-bands |R11| p. 87
6.5.3 Spurious emissions p. 88
6.5.3.1 Definition and applicability p. 88
6.5.3.2 Void
6.5.3.3 Void
6.5.3.4 Minimum Requirements p. 89
6.5.3.5 Test purpose p. 89
6.5.3.6 Method of Test p. 89
6.5.3.6.1 Initial conditions p. 89
6.5.3.6.2 Procedure p. 90
6.5.3.7 Test requirements p. 90
6.5.3.7.1 Spurious emissions (Category A) p. 90
6.5.3.7.2 Spurious emissions (Category B) p. 90
6.5.3.7.3 Protection of the BS receiver of own or different BS p. 91
6.5.3.7.4 Co-existence with other systems in the same geographical area p. 93
6.5.3.7.5 Co-existence with co-located and co-sited base stations p. 99
6.5.3.7.6 Co-existence with PHS p. 107
6.5.3.7.7 Co-existence with services in adjacent frequency bands p. 107
6.5.3.7.8 Void
6.5.3.7.9 Protection of Public Safety Operations |R8| p. 107
6.5.3.7.10 Co-existence with Home BS operating in other bands |R8| p. 108
6.6 Transmitter intermodulation p. 110
6.6.1 Definition and applicability p. 110
6.6.2 Minimum Requirement p. 110
6.6.3 Test purpose p. 110
6.6.4 Method of test p. 111
6.6.4.1 Initial conditions p. 111
6.6.4.2 Procedures p. 111
6.6.5 Test Requirements p. 112
6.7 Transmit modulation p. 112
6.7.1 Error Vector Magnitude p. 112
6.7.1.1 Definition and applicability p. 112
6.7.1.2 Minimum Requirement p. 112
6.7.1.3 Test Purpose p. 112
6.7.1.4 Method of Test p. 112
6.7.1.4.1 Initial Conditions p. 112
6.7.1.4.2 Procedure p. 113
6.7.1.5 Test Requirement p. 113
6.7.2 Peak Code Domain Error p. 113
6.7.2.1 Definition and applicability p. 113
6.7.2.2 Minimum requirement p. 113
6.7.2.3 Test Purpose p. 113
6.7.2.4 Method of test p. 113
6.7.2.4.1 Initial conditions p. 113
6.7.2.4.2 Procedure p. 114
6.7.2.5 Test requirement p. 114
6.7.3 Time alignment error |R5| p. 114
6.7.3.1 Definition and applicability p. 114
6.7.3.2 Minimum Requirement p. 114
6.7.3.3 Test Purpose p. 114
6.7.3.4 Method of Test p. 114
6.7.3.4.1 Initial Conditions p. 114
6.7.3.4.2 Procedure p. 115
6.7.3.5 Test Requirement p. 115
6.7.4 Relative Code Domain Error |R7| p. 115
6.7.4.1 Definition and applicability p. 115
6.7.4.2 Minimum requirement p. 115
6.7.4.3 Test Purpose p. 115
6.7.4.4 Method of test p. 116
6.7.4.4.1 Initial conditions p. 116
6.7.4.4.2 Procedure p. 116
6.7.4.5 Test requirement p. 116
7 Receiver characteristics p. 116
7.1 General p. 116
7.2 Reference sensitivity level p. 117
7.2.1 Definition and applicability p. 117
7.2.2 Minimum Requirement p. 117
7.2.3 Test purpose p. 117
7.2.4 Method of testing p. 117
7.2.4.1 Initial conditions p. 117
7.2.4.2 Procedure p. 118
7.2.5 Test requirement p. 118
7.3 Dynamic range p. 118
7.3.1 Definition and applicability p. 118
7.3.2 Minimum Requirement p. 118
7.3.3 Test purpose p. 119
7.3.4 Method of test p. 119
7.3.4.1 Initial conditions p. 119
7.3.4.2 Procedure p. 119
7.3.5 Test Requirements p. 119
7.4 Adjacent Channel Selectivity (ACS) p. 119
7.4.1 Definition and applicability p. 119
7.4.2 Minimum Requirement p. 120
7.4.3 Test purpose p. 120
7.4.4 Method of test p. 120
7.4.4.1 Initial conditions p. 120
7.4.4.2 Procedure p. 120
7.4.5 Test Requirements p. 120
7.5 Blocking characteristics p. 121
7.5.1 Definition and applicability p. 121
7.5.2 Minimum Requirements p. 121
7.5.3 Test purpose p. 121
7.5.4 Method of test p. 122
7.5.4.1 Initial conditions p. 122
7.5.4.2 Procedure p. 122
7.5.5 Test Requirements p. 123
7.6 Intermodulation characteristics p. 138
7.6.1 Definition and applicability p. 138
7.6.2 Minimum Requirement p. 138
7.6.3 Test purpose p. 138
7.6.4 Method of test p. 138
7.6.4.1 Initial conditions p. 138
7.6.4.2 Procedures p. 139
7.6.5 Test requirements p. 139
7.7 Spurious Emissions p. 140
7.7.1 Definition and applicability p. 140
7.7.2 Minimum Requirements p. 140
7.7.3 Test purpose p. 140
7.7.4 Method of test p. 140
7.7.4.1 Initial conditions p. 140
7.7.4.2 Procedure p. 140
7.7.5 Test requirements p. 141
7.8 Verification of the internal BER calculation p. 141
7.8.1 Definition and applicability p. 141
7.8.2 Minimum Requirement p. 142
7.8.3 Test purpose p. 142
7.8.4 Method of test p. 142
7.8.4.1 Initial conditions p. 142
7.8.4.2 Procedure p. 142
7.8.5 Test Requirement p. 142
