This clause describes the procedure for supporting location accuracy analytics.
Figure 8.5.2-1 illustrates the procedure for location accuracy analytics enablement solution.
Pre-conditions:
-
ADAES is connected to A-ADRF.
-
ADAES has discovered SEAL LMS or FLS.
Step 1.
The VAL server makes a subscription request to ADAE server for location accuracy prediction/stats, including an analytics event ID (e.g. "location accuracy prediction" or "location accuracy sustainability"), an analytics request type (if not identified specifically at the event ID) which can be the location accuracy prediction for a given location X and/or for a given UE/app. The request may include also the target area, a target VAL service, or a VAL UE, or group of UEs of the VAL service, time validity, accuracy threshold and requirements. If the VAL UEs are provided by the VAL server, this request may also include the expected route or a set of waypoints for the UEs of the VAL application.
Step 2.
The ADAE server sends a location accuracy analytics subscription response as an ACK to the VAL server.
Step 3.
The ADAE server discovers and maps the Data Sources with the respective analytics event ID for collecting location data for the corresponding VAL UEs or VAL service area.
Step 4.
The ADAE server subscribes for NWDAF UE mobility analytics per VAL UE (for all the VAL UEs) and gets notification on the per UE location/mobility analytics based on
clause 6.7.2 of TS 23.288. Such analytics may be requested for a list of waypoints per UE route (if indicated at step 1). The ADAE server subscribes also for SEAL LMS location reports for the respective VAL UEs or location reports from all VAL UEs within the requested area.
Step 5.
The ADAE server optionally requests location accuracy historical analytics /data from A-ADRF for the corresponding VAL UEs or VAL service area.
Step 6.
Based on the request, the ADAE server receives location accuracy historical analytics /data from A-ADRF for the corresponding VAL UEs or VAL service area.
Step 7.
The ADAE server abstracts or correlates the data/analytics from steps 4-6 and provides analytics on the location accuracy for the target VAL application. Depending on the event ID in step 1, the ADAE server can indicate whether the location accuracy is sustainable or is predicted to be downgraded or can be upgraded and become more granular (e.g. from meter to decimetre).
Step 8.
The ADAE server sends the location accuracy analytics notification to the consumer.
The following information flows are specified for location accuracy analytics based on
clause 8.5.2
Table 8.5.3.2-1 describes information elements for the location accuracy analytics subscription request from the VAL server to the ADAE server.
Information element |
Status |
Description |
VAL server ID | M | The identifier of the VAL server. |
Analytics ID | M |
The identifier of the location accuracy analytics event. This ID can be for example "location accuracy prediction" or "location accuracy sustainability" depending on the expected outcome.
|
Analytics type | M | The type of analytics for the event, e.g. statistics or predictions. |
VAL UE ID(s) or Group ID | M | The identity of the VAL UE(s) or group of UEs for which the analytics subscription applies. |
VAL service ID | O | The identifier of the VAL service for which location accuracy analytics is requested. |
Location accuracy requirements | M | The accuracy threshold and VAL requirements. |
Preferred confidence level | O | The level of accuracy for the analytics service (in case of prediction). |
Area of Interest | O | The geographical or service area for which the subscription request applies. |
Time validity | O | The time validity of the subscription request. |
UE mobility / route information | O | Information on the target UE or group UE mobility including the expected route/set of waypoints. |
Reporting requirements | O | It describes the requirements for analytics reporting. This requirement may include e.g. the type and frequency of reporting (periodic or event triggered), the reporting periodicity in case of periodic, and reporting thresholds. |
Table 8.5.3.3-1 describes information elements for the location accuracy analytics subscription response from the ADAE server to the VAL server.
Information element |
Status |
Description |
Result | M | The result of the analytics subscription request (positive or negative acknowledgement). |
Table 8.5.3.4-1 describes information elements for the location accuracy data request from the ADAE server to the A-ADRF.
Information element |
Status |
Description |
ADAE server ID | M | The identifier of the ADAE server. |
Analytics ID | M | The identifier of the analytics event. |
List of VAL UE IDs and addresses | M | The VAL UE(s) identifiers and IP address(es) for which the data/analytics apply. |
VAL service ID | O | The service ID, in case of requesting historical data for a particular VAL service. |
Reporting configuration | O | The configuration for data reporting. This requirement may include e.g. the frequency of reporting (periodic), the reporting periodicity in case of periodic, and reporting thresholds, whether data abstraction is needed or not. |
Data collection requirements | O | The requirements for data collection, including the format of data, frequency of reporting, level of abstraction of data, level of accuracy of data. |
Area of Interest | O | The geographical or service area for which the subscription request applies. |
Time validity | O | The time validity of the request. |
Table 8.5.3.5-1 describes information elements for the location accuracy data response from the A-ADRF to the ADAE server.
Information element |
Status |
Description |
Analytics ID | M | The identifier of the analytics event. |
List of VAL UE IDs and addresses | M | The VAL UE(s) identifiers and IP address(es) for which the analytics apply. |
VAL service ID | O | The service ID, in case of requesting historical data for a particular VAL service. |
Analytics Output | M | The reported analytics for the location accuracy, which can be in form of offline stats/historical data for a specific VAL service or for particular UE(s) or group of UEs. |
Table 8.5.3.6-1 describes information elements for the location accuracy analytics notification from the ADAE server to the VAL server.
Information element |
Status |
Description |
Analytics ID | M | The identifier of the analytics event. |
Analytics Output | M | The predictive or statistical parameter, which can be:
-
A predicted or expected location accuracy change (downgrade or upgrade) for a particular VAL service or UEs
-
the location accuracy sustainability for a VAL service or UE/group of UEs over a given time horizon/area
|
Confidence level | O | For predictive analytics, the achieved confidence level can be provided. |