Content for TS 23.333 Word version: 18.1.0
1…
4
5…
5.8…
5.12…
5.14…
5.20…
5.24…
6…
6.1.8…
6.2…
6.2.3…
6.2.4…
6.2.5
6.2.6…
6.2.7…
6.2.8…
6.2.9…
6.2.10…
6.2.10.2.7
6.2.10.3…
6.2.11…
6.2.13…
6.2.13.2.6…
6.2.14…
6.2.15…
6.2.16…
6.2.18…
6.2.19…
6.2.19.3…
6.2.20…
6.2.21…
6.2.22…
6.2.23
6.2.24…
7
8…
8.11…
8.20
8.21
8.22
8.23…
8.30…
8.39…
8.45…
8.56…
8.22 Configure IMS Resources Procedure p. 168
This procedure is used to select multimedia-processing resources for an Mp interface connection; it is based on the procedure of the same name defined in TS 29.163.
| Procedure | Initiated | Information element name | Information element required | Information element description |
|---|---|---|---|---|
| Configure IMS Resources | MRFC | Context | M | This information element indicates the context for the bearer termination. |
| IMS Termination | M | This information element indicates the existing bearer termination. | ||
| Local IMS Resources | O | This information element indicates the resource(s) (i.e. codecs) for which the MRFP shall be prepared to receive user data. For terminations supporting any combination of video, audio and messaging this IE shall contain separate resources per stream. | ||
| Remote IMS Resources | M | This information element indicates the resource(s) (i.e. codecs) for which the MRFP shall send data. For terminations supporting any combination of video, audio and messaging this IE shall contain separate resources per stream. | ||
| Local Connection Address | O | This information element indicates the IP address and port number(s) on the MRFP that the IMS user can send user plane data to. For terminations supporting video any combination of video, audio and messaging may contain multiple addresses. | ||
| Remote Connection Address | M | This information element indicates the remote IP address and port number(s) that the MRFP can send user plane data to. For terminations supporting any combination of video, audio and messaging this may contain multiple addresses. | ||
| Notify termination heartbeat | O | This information element requests termination heartbeat indications. | ||
| ECN Enable | O | This information element requests the MRFP to apply ECN procedures. | ||
| ECN Initiation Method | C | This information element specifies the ECN Initiation method and requests the MRFP to perform IP header settings as an ECN endpoint. It may be included if ECN is enabled. | ||
| Notify ECN Failure Event | C | This information element requests a notification if an ECN related error occurs. It may be included if ECN is enabled. | ||
| Extended RTP Header for CVO | O | This information element requests the MRFP to pass on the CVO extended RTP header as defined by RFC 5285 | ||
| Generic Image Attributes | O | This information element indicates image attributes (e.g. image size) as defined by RFC 6236. | ||
| ICE Connectivity Check | C | This information element requests the MRFP to perform ICE connectivity check as defined by RFC 8445. It is only applicable for full ICE. | ||
| Notify ICE Connectivity Check Result | C | This information element requests a notification of ICE connectivity check result. It is only applicable for full ICE. | ||
| Notify New Peer Reflexive Candidate | C | This information element requests a notification of new peer reflexive candidate was discovered during a connectivity check. It is only applicable for full ICE. | ||
| Additional ICE Connectivity Check | C | This information element requests the MRFP to perform additional ICE connectivity check as defined by RFC 8445. It is only applicable for full ICE. | ||
| ICE received candidate | O | This information element is present if MRFC indicates a received candidate for ICE. | ||
| ICE received password | O | This information element is present if MRFC indicates a received password for ICE. | ||
| ICE received Ufrag | O | This information element is present if MRFC indicates a received Ufrag for ICE. | ||
| ICE received pacing | O | This information element is present if MRFC indicates a received pacing value for connectivity checks (Ta timer value). It is only applicable for full ICE. | ||
| MSRP URI Path | O | This information element provides the MSRP URI path information that the MRFP will insert in the MSRP message "To Path" header field. | ||
| Establish TCP connection | O | This information element requests the MRFP to take a TCP client role and to initiate a TCP connection establishment. | ||
| Notify TCP connection establishment Failure Event | O | This information element requests a notification if a TCP connection establishment failure occurs. | ||
| Establish (D)TLS session | O | This information element requests the MRFP to take a (D)TLS client role and to initiate a (D)TLS session establishment. | ||
| Notify (D)TLS session establishment Failure Event | O | This information element requests a notification if a (D)TLS session establishment failure occurs. | ||
| Pre-Shared Key | O | This information element is present if the MRFC wants that the media is protected using TLS tunnel established with MIKEY-TICKET procedures. It indicates the Traffic-Encrypting key associated with the Crypto Session that shall be used in TLS handshake. | ||
| Allowed RTCP APP message types | O | This information element is present if the MRFC allows the MRFP to send RTCP APP packets of the indicated types. The MRFP shall not send other RTCP APP packets. If the parameter is not supplied, the MRFP shall not send any RTCP APP packets. | ||
| Extended RTP Header for Sent ROI | O | This information element requests the MRFP to pass on the ROI extended RTP header for carriage of predefined and/or arbitrary ROI information as defined by RFC 5285 and TS 26.114. | ||
| Predefined ROI Sent | O | This information element requests the MRFP to support the RTCP feedback message capability for "Predefined ROI" type toward the ROI-sending client, expressed by the parameter "3gpp-roi-predefined", as described in TS 26.114. | ||
| Predefined ROI Received | O | This information element requests the MRFP to support the RTCP feedback message capability for "Predefined ROI" type toward the ROI-receiving clients, expressed by the parameter "3gpp-roi-predefined", as described in TS 26.114. | ||
| Arbitrary ROI Sent | O | This information element requests the MRFP to support the RTCP feedback message capability for "Arbitrary ROI" type toward the ROI-sending client, expressed by the parameter "3gpp-roi-arbitrary", as described in TS 26.114. | ||
| Arbitrary ROI Received | O | This information element requests the MRFP to support the RTCP feedback message capability for "Arbitrary ROI" type toward the ROI-receiving clients, expressed by the parameter "3gpp-roi-arbitrary", as described in TS 26.114. | ||
| Remote certificate fingerprint | O | This information element is present if the MRFC requests the MRFP to establish the CLUE data channel. It indicates the remote certificate fingerprint. | ||
| Remote sctp port | O | This information element is present if the MRFC requests the MRFP to establish the CLUE data channel. It indicates the remote SCTP port. | ||
| Remote max message size | O | This information element is present if the MRFC requests the MRFP to establish the CLUE data channel. It indicates the remote max message size. | ||
| SDPCapNeg configuration | O | This information element provides SDPCapNeg configuration(s) using as "a=acap", "a=tcap", "a=pcfg" and "a=acfg" SDP attributes. | ||
| Additional Bandwidth Properties | O | This information element indicates additional bandwidth properties using "a=bw-info" SDP attribute(s) as defined by TS 26.114. | ||
| CCM BASE | O | This information element indicates that the MRFP shall be prepared to receive and is allowed to send, respectively, the RTCP feedback "CCM FIR" and/or "CCM TMMBR" messages (defined in RFC 5104) to the end user. | ||
| Stream content | O | This information element indicates the content of the media stream as defined in RFC 4796. | ||
| Simulcast desc | O | This information element requests the MRFP to configure a termination with a simulcast capability. For the indicated media stream, it contains the list of simulcast RTP streams using the "a=simulcast" attribute defined RFC 8853. | ||
| Simulcast format | O | This information element indicates the identity and the format of the simulcast RTP stream using the "a=rid" attribute defined in RFC 8851. | ||
| CCM pause-resume | O | This information element requests the MRFP to apply "RTP-level pause and resume" procedures as defined in RFC 7728 and indicates to the MRFP which RTCP feedback "CCM PAUSE-RESUME" messages the MRFP may send to the end user. | ||
| Autonomous request | O | This information element indicates whether the MRFP is allowed to autonomously send RTCP feedback CCM PAUSE and RESUME messages. | ||
| Autonomous response | O | This information element indicates whether the MRFP is allowed to autonomously send response to a CCM PAUSE and RESUME requests i.e. RTCP feedback CCM PAUSED and REFUSED messages. | ||
| Concurrent Codec Capabilities | O | This information element indicates the concurrent codec capabilities of an MMCMH conference participant in a compact representation using the "a=ccc_list" SDP attribute defined in TS 26.114. | ||
| DBI | O | This information element indicates that the MRFP shall be prepared to receive and is allowed to send, respectively, the RTCP feedback messages for "DBI" signalling (as defined in clause 7.3.8 of TS 26.114). | ||
| Configure IMS Resources Ack | MRFP | Context | M | This information element indicates the context where the command was executed. |
| IMS Termination | M | This information element indicates the Bearer Termination where the command was executed. | ||
| Local IMS Resources | O | This information element indicates the resource(s) (i.e. codecs) for which the MRFP shall be prepared to receive user data For terminations supporting any combination of video, audio and messaging this IE shall contain separate resources per stream. | ||
| Remote IMS Resources | M | This information element indicates the resource(s) (i.e. codecs) for which the MRFP shall send data. For terminations supporting any combination of video, audio and messaging this IE shall contain separate resources per stream. | ||
| Local Connection Address | O | This information element indicates the IP address and port number(s) on the MRFP that the IMS user can send user plane data to. For terminations supporting any combination of video, audio and messaging this may contain multiple addresses. | ||
| Remote Connection Address | M | This information element indicates the remote IP address and port number(s) that the MRFP can send user plane data to. For terminations supporting any combination of video, audio and messaging this may contain multiple addresses. |
