Procedure | Initiated | Information element name | Information element required | Information element description |
---|---|---|---|---|
Reserve IMS Resources | MRFC | Context /Context Request | M | This information element indicates the existing context or requests a new context for the bearer termination. |
Priority information | O | This information element requests the MRFP to apply priority treatment for the terminations and bearer connections in the specified context. | ||
IMS Termination Request | M | This information element requests a new bearer termination | ||
Local IMS Resources | M | This information element indicates the resource(s) (i.e. codecs) for which the MRFP shall be prepared to receive user data. For terminations supporting any combination of video, audio and messaging this IE shall contain separate resources per stream. | ||
ReserveValue | O | This information element indicates if multiple local IMS resources are to be reserved. | ||
Local Connection Address Request | M | This information element requests an IP address and port number(s) on the MRFP that the remote end can send user plane data to. For terminations supporting any combination of video, audio and messaging this may contain multiple addresses. | ||
Notify Released Bearer | O | This information element requests a notification of a released bearer. | ||
Notify termination heartbeat | M | This information element requests termination heartbeat indications. | ||
ECN Enable | O | This information element requests the MRFP to apply ECN. | ||
ECN Initiation Method | C | This information element specifies the ECN Initiation method and requests the MRFP to perform IP header settings as an ECN endpoint. It may be included only if ECN is enabled. | ||
Notify ECN Failure Event | C | This information element requests a notification if an ECN related error occurs. It may be included only if ECN is enabled. | ||
Diffserv Code Point | O | This information element requests the MRFP to apply a specific Diffserv Code Point to the IP headers. | ||
Extended RTP Header for CVO | O | This information element requests the MRFP to pass on the CVO extended RTP header as defined by RFC 5285. | ||
Generic Image Attributes | O | This information element indicates image attributes (e.g. image size) as defined by RFC 6236. | ||
ICE password request | O | This information element is present if MRFC requests an ICE password. | ||
ICE Ufrag request | O | This information element is present if MRFC requests an ICE ufrag. | ||
ICE host candidate request | O | This information element is present if MRFC requests an ICE host candidate. | ||
ICE pacing request | O | This information element is present if MRFC requests a pacing value for connectivity checks (Ta timer value). It is only applicable for full ICE. | ||
STUN server request | O | This information element is present if MRFC requests the MRFP to answer STUN connectivity checks for ICE. | ||
MSRP URI Path request | O | This information element requests the MSRP URI path information that the MRFP will insert in the MSRP message "From Path" header field. | ||
Notify TCP connection establishment Failure Event | O | This information element requests a notification if a TCP connection establishment failure occurs. | ||
Local certificate fingerprint Request | O | This information element is present if the MRFC requests the MRFP to establish the CLUE data channel. It requests the MRFP to provide a local certificate fingerprint. | ||
Local SCTP Port Request | O | This information element is present if the MRFC requests the MRFP to establish the CLUE data channel. It requests the MRFP to provide a local SCTP Port. | ||
SCTP Stream ID | O | This information element is present if the MRFC requests the MRFP to establish the CLUE data channel. It indicates the the actual SCTP stream identifier to realize the CLUE data channel. | ||
Subprotocol ID | O | This information element is present if the MRFC requests the MRFP to establish the CLUE data channel. It indicates the the protocol "CLUE" to exchange via the data channel. | ||
Local max message size Request | O | This information element is present if the MRFC requests the MRFP to establish the CLUE data channel. It requests the MRFP to provide a local max message size. | ||
Extended RTP Header for Sent ROI | O | This information element requests the MRFP to pass on the ROI extended RTP header for carriage of predefined and/or arbitrary ROI information as defined by RFC 5285 and TS 26.114. | ||
Predefined ROI Sent | O | This information element requests the MRFP to support the RTCP feedback message capability for "Predefined ROI" type toward the ROI-sending client, expressed by the parameter "3gpp-roi-predefined", as described in TS 26.114. | ||
Predefined ROI Received | O | This information element requests the MRFP to support the RTCP feedback message capability for "Predefined ROI" type toward the ROI-receiving clients, expressed by the parameter "3gpp-roi-predefined", as described in TS 26.114. | ||
Arbitrary ROI Sent | O | This information element requests the MRFP to support the RTCP feedback message capability for "Arbitrary ROI" type toward the ROI-sending client, expressed by the parameter "3gpp-roi-arbitrary", as described in TS 26.114. | ||
Arbitrary ROI Received | O | This information element requests the MRFP to support the RTCP feedback message capability for "Arbitrary ROI" type toward the ROI-receiving clients, expressed by the parameter "3gpp-roi-arbitrary", as described in TS 26.114. | ||
Notify CLUE Message Received Event | O | This information element requests a reporting of the received CLUE message. | ||
SDPCapNeg configuration | O | This information element provides SDPCapNeg configuration(s) using as "a=acap", "a=tcap", "a=pcfg" and "a=acfg" SDP attributes. | ||
MMCMH policy | O | This information element indicates that interconnection of video media streams with different stream identities (StreamIDs) is allowed in the context and that the MRFP shall handle incoming RTP media streams autonomously according to MMCMH policies defined in clause 5.11.3.5. | ||
Stream content | O | This information element indicates the content of the media stream as defined in RFC 4796. | ||
Simulcast desc | O | This information element requests the MRFP to configure a termination with a simulcast capability. For the indicated media stream, it contains the list of simulcast RTP streams using the "a=simulcast" attribute defined RFC 8853. | ||
Simulcast format | O | This information element indicates the identity and the format of the simulcast RTP stream using the "a=rid" attribute defined in RFC 8851. | ||
CCM pause-resume | O | This information element requests the MRFP to apply "RTP-level pause and resume" procedures as defined in RFC 7728 and indicates to the MRFP which RTCP feedback "CCM PAUSE-RESUME" messages the MRFP may send to the end user. | ||
Autonomous request | O | This information element indicates whether the MRFP is allowed to autonomously send RTCP feedback CCM PAUSE and RESUME messages. | ||
Autonomous response | O | This information element indicates whether the MRFP is allowed to autonomously send response to a CCM PAUSE and RESUME requests i.e. RTCP feedback CCM PAUSED and REFUSED messages. | ||
Reserve IMS Resources Ack | MRFP | Context | M | This information element indicates the context where the command was executed. |
Bearer Termination | M | This information element indicates the Bearer Termination where the command was executed. | ||
Local IMS Resources | M | This information element indicates the resource(s) (i.e. codecs) for which the MRFP shall be prepared to receive user data For terminations supporting any combination of video, audio and messaging this IE shall contain separate resources per stream. | ||
Local Connection Address | M | This information element indicates the IP address and port number(s) the MRFP shall receive user plane data from IMS. For terminations supporting any combination of video, audio and messaging this may contain multiple addresses. | ||
ICE password | C | This information element shall be present only if it was contained in the request. It indicates the ICE password assigned by the MRFP. | ||
ICE Ufrag | C | This information element shall be present only if it was contained in the request. It indicates the ICE Ufrag assigned by the MRFP. | ||
ICE host candidate | C | This information element shall be present only if it was contained in the request. It indicates the ICE host candidate assigned by the MRFP. | ||
ICE pacing | C | This information element shall be present only if it was contained in the request. It indicates a desired pacing value for connectivity checks (Ta timer value). | ||
ICE lite indication | C | This information element shall be present only if an ICE host candidate request was contained in the request, and the MRFP supports ICE lite, but not full ICE. It indicates that the MRFP only supports ICE lite. | ||
MSRP URI Path | C | This information element may be present only if the MSRP URI Path request was contained in the request. This information element provides the MSRP URI path information that the MRFP will insert in the MSRP message "From Path" header field. | ||
Local certificate fingerprint | C | This information element may be present only if the Local certificate fingerprint Request was contained in the request. It indicates the local certificate fingerprint. | ||
Local SCTP Port | C | This information element may be present only if the Local SCTP Port Request was contained in the request. It indicates the local SCTP Port. | ||
SCTP Stream ID | C | This information element shall be present if it was contained in the request. It indicates the SCTP stream identifier that the MRFP used to realize the CLUE data channel. | ||
Subprotocol ID | C | This information element shall be present if it was contained in the request. It indicates the the protocol "CLUE" to exchange via the data channel. | ||
Local max message size | C | This information element may be present only if the Local max message size Request was contained in the request. It indicates the local max message size. | ||
SDPCapNeg configuration | C | This information element shall be present only if it was contained in the request. It provides SDPCapNeg configuration(s) using as "a=acap", "a=tcap", "a=pcfg" and "a=acfg" SDP attributes. |