RFC 6522
The Multipart/Report Media Type for the Reporting of Mail System Administrative Messages
Internet Engineering Task Force (IETF) M. Kucherawy, Ed. Request for Comments: 6522 Cloudmark STD: 73 January 2012 Obsoletes: 3462 Category: Standards Track ISSN: 2070-1721 The Multipart/Report Media Type for the Reporting of Mail System Administrative MessagesAbstract
The multipart/report Multipurpose Internet Mail Extensions (MIME) media type is a general "family" or "container" type for electronic mail reports of any kind. Although this memo defines only the use of the multipart/report media type with respect to delivery status reports, mail processing programs will benefit if a single media type is used for all kinds of reports. This memo obsoletes "The Multipart/Report Content Type for the Reporting of Mail System Administrative Messages", RFC 3462, and marks RFC 3462 and its predecessor as "Historic". Status of This Memo This is an Internet Standards Track document. This document is a product of the Internet Engineering Task Force (IETF). It represents the consensus of the IETF community. It has received public review and has been approved for publication by the Internet Engineering Steering Group (IESG). Further information on Internet Standards is available in Section 2 of RFC 5741. Information about the current status of this document, any errata, and how to provide feedback on it may be obtained at http://www.rfc-editor.org/info/rfc6522.
Copyright Notice Copyright (c) 2012 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. This document may contain material from IETF Documents or IETF Contributions published or made publicly available before November 10, 2008. The person(s) controlling the copyright in some of this material may not have granted the IETF Trust the right to allow modifications of such material outside the IETF Standards Process. Without obtaining an adequate license from the person(s) controlling the copyright in such materials, this document may not be modified outside the IETF Standards Process, and derivative works of it may not be created outside the IETF Standards Process, except to format it for publication as an RFC or to translate it into languages other than English.Table of Contents
1. Introduction ....................................................3 2. Document Conventions ............................................3 3. The Multipart/Report Media Type .................................3 4. The text/rfc822-headers Media Type ..............................5 5. Registering New Report Types ....................................7 6. IANA Considerations .............................................7 7. Security Considerations .........................................7 8. References ......................................................7 8.1. Normative References .......................................7 8.2. Informative References .....................................8 Appendix A. Acknowledgements ......................................9
1. Introduction
[OLD-REPORT] and its antecedent declared the multipart/report media type for use within the [MIME] construct to create a container for mail system administrative reports of various kinds. Practical experience has shown that the general requirement of having that media type constrained to be used only as the outermost MIME type of a message is overly restrictive and limits such things as the transmission of multiple administrative reports within a single overall message container. In particular, it prevents one from forwarding a report as part of another multipart MIME message. This memo removes that constraint. No other changes apart from some editorial ones are made. Other memos might update other documents to establish or clarify the constraints on use of multipart/report in contexts where such are needed. This memo obsoletes RFC 3462. RFC 3462 and its predecessor, RFC 1892, have been marked as "Historic".2. Document Conventions
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [KEYWORDS].3. The Multipart/Report Media Type
The multipart/report MIME media type is a general "family" or "container" type for electronic mail reports of any kind. Although this memo defines only the use of the multipart/report media type with respect to delivery status reports, mail processing programs will benefit if a single media type is used for all kinds of reports. Per [MIME-REG], the multipart/report media type is defined as follows: Type name: multipart Subtype name: report Required parameters: boundary, report-type Optional parameters: none
Encoding considerations: 7bit should always be adequate Security considerations: see Section 7 of [RFC6522] Interoperability considerations: see Section 1 of [RFC6522] Published specification: [RFC6522] Applications that use this media type: Mail Transfer Agents, Mail User Agents, spam detection and reporting modules, virus detection modules, and message authentication modules. Additional information: Magic number(s): N/A File extension(s): N/A Macintosh file type code(s): N/A Person and email address to contact for further information: Murray S. Kucherawy <msk@cloudmark.com> Intended usage: common Restrictions on usage: none; however, other applications that register report types may establish such restrictions. Author: Murray S. Kucherawy <msk@cloudmark.com> Change controller: IESG The syntax of multipart/report is identical to the multipart/mixed content type defined in [MIME]. The report-type parameter identifies the type of report. The parameter is the MIME subtype of the second body part of the multipart/report. (See Section 5.) The multipart/report media type contains either two or three sub- parts, in the following order: 1. (REQUIRED) The first body part contains a human-readable message. The purpose of this message is to provide an easily understood description of the condition(s) that caused the report to be generated, for a human reader who might not have a user agent capable of interpreting the second section of the multipart/ report. The text in the first section can use any IANA- registered MIME media type, charset, or language. Where a description of the error is desired in several languages or
several media, a multipart/alternative construct MAY be used.
This body part MAY also be used to send detailed information that
cannot be easily formatted into the second body part.
2. (REQUIRED) A machine-parsable body part containing an account of
the reported message handling event. The purpose of this body
part is to provide a machine-readable description of the
condition(s) that caused the report to be generated, along with
details not present in the first body part that might be useful
to human experts. An initial body part, message/delivery-status,
is defined in [DSN-FORMAT].
3. (OPTIONAL) A body part containing the returned message or a
portion thereof. This information could be useful to aid human
experts in diagnosing problems. (Although it might also be
useful to allow the sender to identify the message about which
the report was issued, it is hoped that the envelope-id and
original-recipient-address returned in the message/report body
part will replace the traditional use of the returned content for
this purpose.)
Return of content can be wasteful of network bandwidth and a variety
of implementation strategies can be used. Generally, the sender
needs to choose the appropriate strategy and inform the recipient of
the required level of returned content required. In the absence of
an explicit request for level of return of content such as that
provided in [DSN-SMTP], the agent that generated the delivery service
report SHOULD return the full message content.
When 8-bit or binary data not encoded in a 7-bit form is to be
returned, and the return path is not guaranteed to be 8-bit or binary
capable, two options are available. The original message MAY be
re-encoded into a legal 7-bit MIME message or the text/rfc822-headers
media type MAY be used to return only the original message headers.
4. The text/rfc822-headers Media Type
The text/rfc822-headers media type provides a mechanism to label and
return only the [MAIL] header of a failed message. The header is not
the complete message and SHOULD NOT be returned using the message/
rfc822 media type defined in [MIME-TYPES]. The returned header is
useful for identifying the failed message and for diagnostics based
on the Received header fields.
The text/rfc822-headers media type is defined as follows:
Type name: text
Subtype name: rfc822-headers
Required parameters: None
Optional parameters: None
Encoding considerations: 7-bit is sufficient for normal mail
headers, however, if the headers are broken or extended and
require encoding to make them legal 7-bit content, they MAY be
encoded with quoted-printable as defined in [MIME].
Security considerations: See Section 7 of [RFC6522].
Interoperability considerations: none
Published specification: [RFC6522]
Applications that use this media type: Mail Transfer Agents, Mail
User Agents, spam detection and reporting modules, virus detection
modules, and message authentication modules.
Additional information:
Magic number(s): N/A
File extension(s): N/A
Macintosh file type code(s): N/A
Person and email address to contact for further information: Murray
S. Kucherawy <msk@cloudmark.com>
Intended usage: common
Restrictions on usage: none
Author: Murray S. Kucherawy <msk@cloudmark.com>
Change controller: IESG
The text/rfc822-headers body part SHOULD contain all the mail header
fields from the message that caused the report. The header includes
all header fields prior to the first blank line in the message. They
include the MIME-Version and MIME content description fields.
5. Registering New Report Types
Registration of new media types for the purpose of creating a new report format SHOULD note in the Intended Usage section of the media type registration that the type being registered is suitable for use as a report-type (i.e., the second body part) in the context of this specification.6. IANA Considerations
IANA has updated the Media Type Registry to indicate that this memo contains the current definition of the multipart/report and text/ rfc822-headers media types, obsoleting [OLD-REPORT].7. Security Considerations
Automated use of report types without authentication presents several security issues. Forging negative reports presents the opportunity for denial-of-service attacks when the reports are used for automated maintenance of directories or mailing lists. Forging positive reports can cause the sender to incorrectly believe a message was delivered when it was not. A signature covering the entire multipart/report structure could be used to prevent such forgeries; such a signature scheme is, however, beyond the scope of this document.8. References
8.1. Normative References
[KEYWORDS] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [MAIL] Resnick, P., Ed., "Internet Message Format", RFC 5322, October 2008. [MIME] Freed, N. and N. Borenstein, "Multipurpose Internet Mail Extensions (MIME) Part One: Format of Internet Message Bodies", RFC 2045, November 1996. [MIME-REG] Freed, N. and J. Klensin, "Media Type Specifications and Registration Procedures", BCP 13, RFC 4288, December 2005. [MIME-TYPES] Freed, N. and N. Borenstein, "Multipurpose Internet Mail Extensions (MIME) Part Two: Media Types", RFC 2046, November 1996.
8.2. Informative References
[DSN-FORMAT] Moore, K. and G. Vaudreuil, "An Extensible Message Format for Delivery Status Notifications", RFC 3464, January 2003. [DSN-SMTP] Moore, K., "Simple Mail Transfer Protocol (SMTP) Service Extension for Delivery Status Notifications (DSNs)", RFC 3461, January 2003. [OLD-REPORT] Vaudreuil, G., "The Multipart/Report Content Type for the Reporting of Mail System Administrative Messages", RFC 3462, January 2003.
Appendix A. Acknowledgements
The author would like to thank Dave Crocker, Frank Ellermann, Ned Freed, Randall Gellens, Alexey Melnikov, and Keith Moore for their input to this update. Thanks also go to Gregory M. Vaudreuil, the original creator of this media type.Author's Address
Murray S. Kucherawy (editor) Cloudmark 128 King St., 2nd Floor San Francisco, CA 94107 US Phone: +1 415 946 3800 EMail: msk@cloudmark.com