Tech-invite3GPPspaceIETFspace
96959493929190898887868584838281807978777675747372717069686766656463626160595857565554535251504948474645444342414039383736353433323130292827262524232221201918171615141312111009080706050403020100
in Index   Prev   Next

RFC 4312

The Camellia Cipher Algorithm and Its Use With IPsec

Pages: 8
Proposed Standard
Errata

ToP   noToC   RFC4312 - Page 1
Network Working Group                                            A. Kato
Request for Comments: 4312                      NTT Software Corporation
Category: Standards Track                                      S. Moriai
                                        Sony Computer Entertainment Inc.
                                                                M. Kanda
                              Nippon Telegraph and Telephone Corporation
                                                           December 2005


          The Camellia Cipher Algorithm and Its Use With IPsec

Status of This Memo

   This document specifies an Internet standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "Internet
   Official Protocol Standards" (STD 1) for the standardization state
   and status of this protocol.  Distribution of this memo is unlimited.

Copyright Notice

   Copyright (C) The Internet Society (2005).

Abstract

This document describes the use of the Camellia block cipher algorithm in Cipher Block Chaining Mode, with an explicit Initialization Vector, as a confidentiality mechanism within the context of the IPsec Encapsulating Security Payload (ESP).

1. Introduction

This document describes the use of the Camellia block cipher algorithm in Cipher Block Chaining Mode, with an explicit Initialization Vector, as a confidentiality mechanism within the context of the IPsec Encapsulating Security Payload (ESP). Camellia was selected as a recommended cryptographic primitive by the EU NESSIE (New European Schemes for Signatures, Integrity and Encryption) project [NESSIE] and was included in the list of cryptographic techniques for Japanese e-Government systems that was selected by the Japan CRYPTREC (Cryptography Research, Evaluation Committees) [CRYPTREC]. Camellia has been submitted to several other standardization bodies, such as ISO (ISO/IEC 18033) and the IETF S/MIME Mail Security Working Group [Camellia-CMS].
ToP   noToC   RFC4312 - Page 2
   Camellia supports 128-bit block size and 128-, 192-, and 256-bit key
   lengths, i.e., the same interface specifications as the Advanced
   Encryption Standard (AES) [AES].

   Camellia is a symmetric cipher with a Feistel structure.  Camillia
   was developed jointly by NTT and Mitsubishi Electric Corporation in
   2000.  It was designed to withstand all known cryptanalytic attacks,
   and it has been scrutinized by worldwide cryptographic experts.
   Camellia is suitable for implementation in software and hardware,
   offering encryption speed in software and hardware implementations
   that is comparable to AES.

   The Camellia homepage [Camellia-Web] contains a wealth of information
   about camellia, including detailed specification, security analysis,
   performance figures, reference implementation, test vectors, and
   intellectual property information.

   The remainder of this document specifies the use of Camellia within
   the context of IPsec ESP.  For further information on how the various
   pieces of ESP fit together to provide security services, please refer
   to [ARCH], [ESP], and [ROAD].

1.1. Specification of Requirements

The keywords "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" that appear in this document are to be interpreted as described in [RFC-2119].

2. The Camellia Cipher Algorithm

All symmetric block cipher algorithms share common characteristics and variables, including mode, key size, weak keys, block size, and rounds. The following sections contain descriptions of the relevant characteristics of Camellia. The algorithm specification and object identifiers are described in [Camellia-Desc].

2.1. Mode

NIST has defined five modes of operation for AES and other FIPS- approved ciphers [SP800-38a]: CBC (Cipher Block Chaining), ECB (Electronic CodeBook), CFB (Cipher FeedBack), OFB (Output FeedBack), and CTR (Counter). The CBC mode is well defined and well understood for symmetric ciphers, and it is currently required for all other ESP ciphers. This document specifies the use of the Camellia cipher in CBC mode within ESP. This mode requires an Initialization Vector
ToP   noToC   RFC4312 - Page 3
   (IV) size that is the same as the block size.  Use of a randomly
   generated IV prevents generation of identical cipher text from
   packets that have identical data spanning the first block of the
   cipher algorithm's block size.

   The CBC IV is XOR'd with the first plaintext block before it is
   encrypted.  Then, for successive blocks, the previous cipher text
   block is XOR'd with the current plain text before it is encrypted.
   More information on CBC mode can be obtained in [SP800-38a,
   CRYPTO-S].

2.2. Key Size

Camellia supports three key sizes: 128 bits, 192 bits, and 256 bits. The default key size is 128 bits, and all implementations MUST support this key size. Implementations MAY also support key sizes of 192 bits and 256 bits. Camellia uses a different number of rounds for each of the defined key sizes. When a 128-bit key is used, implementations MUST use 18 rounds. When a 192-bit key is used, implementations MUST use 24 rounds. When a 256-bit key is used, implementations MUST use 24 rounds.

2.3. Weak Keys

At the time of writing this document, there are no known weak keys for Camellia.

2.4. Block Size and Padding

Camellia uses a block size of sixteen octets (128 bits). Padding is required by the algorithms to maintain a 16-octet (128-bit) block size. Padding MUST be added, as specified in [ESP], such that the data to be encrypted (which includes the ESP Pad Length and Next Header fields) is a multiple of 16 octets. Because of the algorithm-specific padding requirement, no additional padding is required to ensure that the ciphertext terminates on a 4-octet boundary. That is, maintaining a 16-octet block size guarantees that the ESP Pad Length and Next Header fields will be right-aligned within a 4-octet word). Additional padding MAY be included, as specified in [ESP], as long as the 16-octet block size is maintained.
ToP   noToC   RFC4312 - Page 4

2.5. Performance

Performance figures of Camellia are available at [Camellia-Web]. This web site also includes performance comparison with the AES cipher and other AES finalists. The NESSIE project [NESSIE] has reported performance of Optimized Implementations independently.

3. ESP Payload

The ESP payload is made up of the IV followed by raw cipher-text. Thus, the payload field, as defined in [ESP], is broken down according to the following diagram: +---------------+---------------+---------------+---------------+ | | + Initialization Vector (16 octets) + | | +---------------+---------------+---------------+---------------+ | | ~ Encrypted Payload (variable length, a multiple of 16 octets) ~ | | +---------------------------------------------------------------+ The IV field MUST be the same size as the block size of the cipher algorithm being used. The IV MUST be chosen at random, and MUST be unpredictable. Including the IV in each datagram ensures that each received datagram can be decrypted, even when some datagrams are dropped or re-ordered in transit. To avoid CBC encryption of very similar plaintext blocks in different packets, implementations MUST NOT use a counter or other low Hamming-distance source for IVs.

3.1. ESP Algorithmic Interactions

Currently, there are no known issues regarding interactions between the Camellia and other aspects of ESP, such as the use of certain authentication schemes.

3.2. Keying Material

The minimum number of bits sent from the key exchange protocol to the ESP algorithm must be greater than or equal to the key size. The cipher's encryption and decryption key is taken from the first 128, 192, or 256 bits of the keying material.
ToP   noToC   RFC4312 - Page 5

4. Interaction with Internet Key Exchange [IKE]

Camellia was designed to follow the same API as the AES cipher. Therefore, this section defines only Phase 1 Identifier and Phase 2 Identifier. Any other consideration related to interaction with IKE is the same as that of the AES cipher. Details can be found in [AES-IPSEC].

4.1. Phase 1 Identifier

For Phase 1 negotiations, IANA has assigned an Encryption Algorithm ID of 8 for CAMELLIA-CBC.

4.2. Phase 2 Identifier

For Phase 2 negotiations, IANA has assigned an ESP Transform Identifier of 22 for ESP_CAMELLIA.

5. Security Considerations

Implementations are encouraged to use the largest key sizes they can, taking into account performance considerations for their particular hardware and software configuration. Note that encryption necessarily affects both sides of a secure channel, so such consideration must take into account not only the client side, but also the server. However, a key size of 128 bits is considered secure for the foreseeable future. No security problem has been found on Camellia [CRYPTREC][NESSIE].

6. IANA Considerations

IANA has assigned Encryption Algorithm ID = 8 to CAMELLIA-CBC. IANA has assigned ESP Transform Identifier = 22 to ESP_CAMELLIA.

7. Acknowledgements

Portions of this text were unabashedly borrowed from [AES-IPSEC]. This work was done when the first author worked for NTT.
ToP   noToC   RFC4312 - Page 6

8. References

8.1. Normative References

[Camellia-Desc] Matsui, M., Nakajima, J., and S. Moriai, "A Description of the Camellia Encryption Algorithm", RFC 3713, April 2004. [ESP] Kent, S., "IP Encapsulating Security Payload (ESP)", RFC 4303, December 2005.

8.2. Informative References

[AES] NIST, FIPS PUB 197, "Advanced Encryption Standard (AES)," November 2001. http://csrc.nist.gov/publications/fips/fips197/ fips-197.{ps,pdf}. [AES-IPSEC] Frankel, S., Glenn, R., and S. Kelly, "The AES-CBC Cipher Algorithm and Its Use With IPsec," RFC 3602, September 2003. [ARCH] Kent, S. and R. Atkinson, "Security Architecture for the Internet Protocol", RFC 2401, November 1998. [Camellia-CMS] Moriai, S. and A. Kato, "Use of the Camellia Encryption Algorithm in Cryptographic Message Syntax (CMS)", RFC 3657, January 2004. [Camellia-Web] Camellia web site: http://info.isl.ntt.co.jp/camellia/. [CRYPTO-S] Schneier, B., "Applied Cryptography Second Edition", John Wiley & Sons, New York, NY, 1995, ISBN 0-471- 12845-7. [CRYPTREC] Information-technology Promotion Agency (IPA), Japan, CRYPTREC. http://www.ipa.go.jp/security/enc/CRYPTREC/ index- e.html. [IKE] Harkins, D. and D. Carrel, "The Internet Key Exchange (IKE)", RFC 2409, November 1998. [SP800-38a] Dworkin, M., "Recommendation for Block Cipher Modes of Operation - Methods and Techniques", NIST Special Publication 800-38A, December 2001.
ToP   noToC   RFC4312 - Page 7
   [NESSIE]         The NESSIE project (New European Schemes for
                    Signatures, Integrity and Encryption),
                    http://www.cosic.esat.kuleuven.ac.be/nessie/.

   [ROAD]           Thayer, R., Doraswamy, N., and R. Glenn, "IP
                    Security Document Roadmap", RFC 2411, November 1998.

   [RFC-2119]       Bradner, S., "Key words for use in RFCs to Indicate
                    Requirement Levels", BCP 14, RFC 2119, March 1997.

Authors' Addresses

Akihiro Kato NTT Software Corporation Phone: +81-45-212-7934 Fax: +81-45-212-7410 EMail: akato@po.ntts.co.jp Shiho Moriai Sony Computer Entertainment Inc. Phone: +81-3-6438-7523 Fax: +81-3-6438-8629 EMail: camellia@isl.ntt.co.jp (Camellia team) shiho@rd.scei.sony.co.jp (Shiho Moriai) Masayuki Kanda Nippon Telegraph and Telephone Corporation Phone: +81-46-859-2437 Fax: +81-46-859-3365 EMail: kanda@isl.ntt.co.jp
ToP   noToC   RFC4312 - Page 8
Full Copyright Statement

   Copyright (C) The Internet Society (2005).

   This document is subject to the rights, licenses and restrictions
   contained in BCP 78, and except as set forth therein, the authors
   retain all their rights.

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
   ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
   INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
   INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Intellectual Property

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at ietf-
   ipr@ietf.org.

Acknowledgement

   Funding for the RFC Editor function is currently provided by the
   Internet Society.