Tech-invite3GPPspaceIETFspace
96959493929190898887868584838281807978777675747372717069686766656463626160595857565554535251504948474645444342414039383736353433323130292827262524232221201918171615141312111009080706050403020100
in Index   Prev   Next

RFC 0416

ARC System Will Be Unavailable for Use During Thanksgiving Week

Pages: 2
Unclassified

ToP   noToC   RFC0416 - Page 1
NETWORK WORKING GROUP                           James C. Norton (SRI-ARC)
Request for Comments #416                          7-NOV-72
NIC #12542

 THE ARC SYSTEM WILL BE UNAVAILABLE FOR USE DURING THANKSGIVING WEEK
	
The ARC PDP-10 system will be unavailable for ARC and NIC users
from Friday, November 17 (6:00 pm PST ) through Sunday, November
26. (10:00 pm PST).  This will give our hardware team a period of
nine days to work on equipment with a loss of only three SRI
working days to users (Monday, Tuesday, and Wednesday.)

This is the Network Information Center's notice to its network
users of the schedule.

    In addition, a login message will be sent starting about 6
    November to all users showing schedule.

       It will read something like: "THE ARC/NIC PDP-10 SYSTEM
      WILL BE UNAVAILABLE FOR USE FROM FRIDAY NOV 17 (6:00 pm
      PST) THRU SUNDAY NOV 26 (10:00 pm PST) FOR MAJOR HARDWARE
      WORK AS OUTLINED IN (12542,)".

For those who are interested, the hardware facility work to be
done during this period will include:

   Removal of the Bryant disk, Bryant disk controller and
   Cybernex drum-disk interference.

   Moving the Tasker display system and DEC dispack (old and
   new) equipment to their new locations.

   Having Bryant people run a combination drum maintenance and
   training session to teach ARC people how to change heads and
   clean the drum.

   Redoing the power cabling to the drum.

   Putting the new signal cable in between drum and controller.

   Debugging the parity checker.
ToP   noToC   RFC0416 - Page 2
   Making a check of all main signal levels in XCORE.

   Debugging the new cable from the parity checker to XCORE.

   Wiring the parity bit through the Cybernex XCORE interface.

   Getting any necessary power wiring done.

   Building a wall for the next dispack location.


    [ This RFC was put into machine readable form for entry ]
    [ into the online RFC archives by BBN Corp. under the   ]
    [ direction of Alex McKenzie.                      1/97 ]