Content for TS 51.010-1 Word version: 13.11.0
2 References
3 Definitions, conventions and applicability
4 Test Equipment
5 Testing methodology in general (layers 1, 2, and 3)
6 Reference test methods
7 Implicit testing
8 Measurement uncertainty
9 Format of tests
10 Generic call set up procedures
11 General tests
12 Transceiver
13 Transmitter
...
...
2 References p. 70
3 Definitions, conventions and applicability p. 79
3.1 Mobile station definition and configurations p. 79
3.2 Applicability p. 80
3.2.1 Applicability of this specification p. 80
3.2.1.1 MS equipped with a connector p. 80
3.2.1.2 GPRS p. 80
3.2.2 Applicability of the individual tests p. 80
3.2.3 Applicability to terminal equipment p. 80
3.3 Definitions p. 80
3.4 Conventions for mathematical notations p. 81
3.4.1 Mathematical signs p. 81
3.4.2 Powers to the base 10 p. 81
3.5 Conventions on electrical terms p. 81
3.5.1 Radio Frequency (RF) input signal level p. 81
3.5.2 Reference sensitivity level p. 82
3.5.3 Power level of fading signal p. 82
3.6 Terms on test conditions p. 82
4 Test Equipment p. 84
4.1 Terms used to describe test equipment in the present document p. 84
4.2 Functional requirements of test equipment p. 84
5 Testing methodology in general (layers 1, 2, and 3) p. 84
5.1 Testing of optional functions and procedures p. 84
5.2 Test interfaces and facilities p. 84
5.3 Different protocol layers p. 85
5.4 Information to be provided by the apparatus supplier p. 85
5.5 Definitions of transmit and receive times p. 85
6 Reference test methods p. 85
6.1 General p. 85
6.2 Choice of frequencies in the frequency hopping mode p. 86
6.3 "Ideal" radio conditions p. 87
6.4 Standard test signals p. 87
6.5 Power (control) levels p. 87
7 Implicit testing p. 87
8 Measurement uncertainty p. 87
9 Format of tests p. 87
10 Generic call set up procedures p. 90
10.1 Generic call set-up procedure for mobile terminating speech calls p. 90
10.1.1 Initial conditions p. 90
10.1.2 Definition of system information messages p. 90
10.1.3 Procedure p. 92
10.1.4 Specific message contents p. 93
10.1a Generic call set-up procedure for mobile terminating signalling only connection p. 94
10.1a.1 Initial conditions p. 94
10.1a.2 Definition of system information messages p. 95
10.1a.3 Procedure p. 95
10.1a.4 Specific message contents p. 95
10.2 Generic call set-up procedure for mobile originating speech calls p. 96
10.2.1 Initial conditions p. 96
10.2.2 Definition of system information messages p. 96
10.2.3 Procedure p. 96
10.2.4 Specific message contents p. 97
10.2a Generic call set-up procedure for mobile originating signalling only connection p. 98
10.2a.1 Initial conditions p. 98
10.2a.2 Definition of system information messages p. 98
10.2a.3 Procedure p. 98
10.2a.4 Specific message contents p. 99
10.3 Generic call set-up procedure for mobile terminating data calls p. 99
10.3.1 Initial conditions p. 99
10.3.2 Definition of system information messages p. 100
10.3.3 Procedure p. 100
10.3.4 Specific message contents p. 100
10.4 Generic call set-up procedure for mobile originating data calls p. 102
10.4.1 Initial conditions p. 102
10.4.2 Definition of system information messages p. 102
10.4.3 Procedure p. 102
10.4.4 Specific message contents p. 103
10.5 Generic call set-up procedure for mobile terminating multislot configuration, minimum number of timeslots allocated p. 105
10.5.1 Initial conditions p. 105
10.5.2 Definition of system information messages p. 105
10.5.3 Procedure p. 105
10.5.4 Specific message contents p. 106
10.6 Generic call set-up procedure for mobile originating multislot configuration, minimum number of timeslots allocated p. 108
10.6.1 Initial conditions p. 108
10.6.2 Definition of system information messages p. 108
10.6.3 Procedure p. 109
10.6.4 Specific message contents p. 109
10.7 Generic procedure for GPRS downlink data transfer p. 111
10.7.1 Initial conditions p. 111
10.7.2 Definition of system information messages p. 111
10.7.3 Procedure p. 111
10.7.4 Specific message contents p. 112
10.8 Generic procedure for GPRS uplink data transfer p. 112
10.8.1 Initial conditions p. 112
10.8.2 Definition of system information messages p. 112
10.8.3 Procedure p. 112
10.8.4 Specific message contents p. 113
10.9 Void
10.10 Void
11 General tests p. 115
11.1 Verification of support and non-support of services (multiple numbering scheme or ISDN) p. 115
11.2 Verification of support of the single numbering scheme p. 117
11.3 Verification of non-support of services (Advice of Charge Charging (AoCC)) p. 118
11.4 Verification of non-support of services (call hold) p. 119
11.5 Verification of non-support of services (multiparty) p. 120
11.6 Verification of non-support of feature (Fixed Dialling Number (FDN)) p. 121
11.7 IMEI Security p. 122
11.7.4 Declaration p. 122
11.8 Coding of the Bearer Capability information element p. 122
11.8.1 Network to MS Direction p. 123
11.8.1.1 BS 21 to 26 - Asynchronous Service p. 123
11.8.1.1.1 BS 21 p. 123
11.8.1.1.2 BS 22 p. 126
11.8.1.1.3 BS 24 p. 127
11.8.1.1.4 BS 25 p. 127
11.8.1.1.5 BS 26 p. 127
11.8.1.1.6 BS 23 p. 127
11.8.1.2 BS 31 to 34 - Synchronous Service p. 128
11.8.1.3 BS 61 - Alternate Speech / Data p. 133
11.8.1.3.1 Speech/Asynchronous Data, Transparent p. 133
11.8.1.3.2 Speech/Asynchronous Data, Non Transparent p. 135
11.8.1.3.3 Speech/Synchronous Data p. 136
11.8.1.4 BS 81 - Speech followed by Data p. 137
11.8.1.4.1 Speech followed by Asynchronous Data p. 137
11.8.1.4.2 Speech followed by Synchronous Data p. 137
11.8.1.5 TS 61 - Alternate Speech / Facsimile group 3 p. 137
11.8.1.5.1 TS 61 - Alternate Speech / Facsimile group 3, Transparent p. 138
11.8.1.5.2 TS 61 - Alternate Speech / Facsimile group 3, Non-Transparent p. 139
11.8.1.6 TS 62 - Automatic Facsimile group 3 p. 140
11.8.2 MS to SS direction p. 140
11.8.2.1 BS 21 to 26 - Asynchronous Service p. 140
11.8.2.1.1 BS 21 p. 141
11.8.2.1.2 BS 22 p. 144
11.8.2.1.3 BS 24 p. 145
11.8.2.1.4 BS 25 p. 145
11.8.2.1.5 BS 26 p. 145
11.8.2.1.6 BS 23 p. 145
11.8.2.2 BS 31 to 34 - Synchronous Service p. 146
11.8.2.3 BS 41 to 46 - PAD Access Asynchronous p. 151
11.8.2.3.1 2) BS 41 p. 151
11.8.2.3.2 BS 42 p. 152
11.8.2.3.3 BS 44 p. 153
11.8.2.3.4 BS 45 p. 153
11.8.2.3.5 BS 46 p. 153
11.8.2.3.6 BS 43 p. 153
11.8.2.4 BS 51 to 53 - Packet Service Synchronous p. 154
11.8.2.5 BS 61 - Alternate Speech / Data p. 154
11.8.2.5.1 Speech/Asynchronous Data, Transparent p. 155
11.8.2.5.2 Speech/Asynchronous Data, Non Transparent p. 157
11.8.2.5.3 Speech/Synchronous Data p. 158
11.8.2.6 BS 81 - Speech followed by Data p. 160
11.8.2.6.1 Speech followed by Asynchronous Data p. 160
11.8.2.6.2 Speech followed by Synchronous Data p. 160
11.8.2.7 TS 61 - Alternate Speech / Facsimile group 3 p. 160
11.8.2.7.1 TS 61 - Alternate Speech / Facsimile group 3, Transparent p. 161
11.8.2.7.2 TS 61 - Alternate Speech / Facsimile group 3, Non Transparent p. 162
11.8.2.8 TS 62 - Automatic Facsimile group 3 p. 162
11.8.2.9 TS 11 and TS 12 - Speech p. 163
12 Transceiver p. 168
12.1 Conducted spurious emissions p. 168
12.1.1 MS allocated a channel p. 168
12.1.2 MS in idle mode p. 171
12.2 Radiated spurious emissions p. 173
12.2.1 MS allocated a channel p. 173
12.2.2 MS in idle mode p. 175
12.3 Conducted spurious emissions for MS supporting the R-GSM or ER-GSM frequency band p. 177
12.3.1 MS allocated a channel p. 177
12.3.2 MS in idle mode p. 179
12.4 Radiated spurious emissions for MS supporting the R-GSM or ER-GSM frequency band p. 180
12.4.1 MS allocated a channel p. 181
12.4.2 MS in idle mode p. 182
13 Transmitter p. 184
13.1 Frequency error and phase error p. 184
13.1.1 Definition p. 184
13.1.2 Conformance requirement p. 184
13.1.3 Test purpose p. 185
13.1.4 Method of test p. 185
13.1.5 Test requirements p. 187
13.1a Frequency error in VAMOS configuration p. 187
13.1b Frequency error and phase error in TIGHTER configuration \ with legacy TSC in VAMOS mode p. 189
13.2b Frequency error under multipath and interference conditions in TIGHTER configuration \ with legacy TSC in VAMOS mode p. 190
13.2 Frequency error under multipath and interference conditions p. 192
13.2.1 Definition p. 192
13.2.2 Conformance requirement p. 192
13.2.3 Test purpose p. 192
13.2.4 Method of test p. 193
13.2.5 Test requirements p. 194
13.2a Frequency error under multipath and interference conditions in VAMOS configuration p. 194
13.3 Transmitter output power and burst timing p. 196
13.3.1 Definition p. 196
13.3.2 Conformance requirement p. 197
13.3.3 Test purpose p. 198
13.3.4 Methods of test p. 199
13.3.5 Test requirements p. 202
13.4 Output RF spectrum p. 206
13.4.1 Definition p. 206
13.4.2 Conformance requirement p. 206
13.4.3 Test purpose p. 207
13.4.4 Method of test p. 207
13.4.5 Test requirements p. 210
13.5 Void
13.6 Frequency error and phase error in HSCSD multislot configurations p. 213
13.6.1 Definition p. 213
13.6.2 Conformance requirement p. 213
13.6.3 Test purpose p. 214
13.6.4 Method of test p. 214
13.6.5 Test requirements p. 216
13.7 Transmitter output power and burst timing in HSCSD configurations p. 217
13.7.1 Definition p. 217
13.7.2 Conformance requirement p. 217
13.7.3 Test purpose p. 218
13.7.4 Methods of test p. 219
13.7.5 Test requirements p. 222
13.8 Output RF spectrum in HSCSD multislot configuration p. 229
13.8.1 Definition p. 229
13.8.2 Conformance requirement p. 229
13.8.3 Test purpose p. 230
13.8.4 Method of test p. 230
13.8.5 Test requirements p. 232
13.9 Output RF spectrum for MS supporting the R-GSM or ER-GSM frequency band p. 235
13.9.1 Definition p. 235
13.9.2 Conformance requirement p. 236
13.9.3 Test purpose p. 236
13.9.4 Method of test p. 236
13.9.5 Test requirements p. 238
13.10 Void
13.11 Void
13.12 Void
13.13 Void
13.14 Void
13.15 Void
13.16 GPRS transmitter tests p. 240
13.16.1 Frequency error and phase error in GPRS multislot configuration p. 240
13.16.2 Transmitter output power in GPRS multislot configuration p. 244
13.16.3 Output RF spectrum in GPRS multislot configuration p. 256
13.17 EGPRS transmitter tests p. 263
13.17.1 Frequency error and Modulation accuracy in EGPRS Configuration p. 263
13.17.1a Frequency error and Modulation accuracy in EGPRS2A Configuration p. 267
13.17.1b Frequency error and Modulation accuracy in EC-GSM-IoT Configuration p. 271
13.17.1c Phase and amplitude coherency in EC-GSM-IoT Configuration p. 274
13.17.2 Frequency error under multipath and interference conditions p. 276
13.17.2a Frequency error under multipath and interference conditions for EGPRS2A configuration p. 278
13.17.3 EGPRS Transmitter output power p. 281
13.17.3a Transmitter output power in EGPRS2A configuration p. 290
13.17.3b Transmitter output power in for EC-GSM-IoT configuration p. 300
13.17.4 Output RF spectrum in EGPRS configuration p. 308
13.17.4a Output RF spectrum in EGPRS2A configuration p. 315
13.17.5 Void
