Content for TS 45.005 Word version: 18.0.0
2 Frequency bands and channel arrangement
3 Reference configuration
4 Transmitter characteristics
5 Receiver characteristics
6 Transmitter/receiver performance
...
...
2 Frequency bands and channel arrangement p. 14
3 Reference configuration p. 17
4 Transmitter characteristics p. 18
4.1 Output power p. 18
4.1.1 Mobile Station p. 18
4.1.2 Base station p. 23
4.2 Output RF spectrum p. 26
4.2.1 Spectrum due to the modulation and wide band noise p. 26
4.2.1.1 General requirements for all types of Base stations and MS |R9| p. 26
4.2.1.2 Additional requirements for multicarrier BTS |R9| p. 27
4.2.1.3 Tables for spectrum requirements due to modulation and wideband noise |R9| p. 28
4.2.1.4 Exceptions for spectrum due to modulation and wideband noise |R9| p. 32
4.2.2 Spectrum due to switching transients p. 33
4.3 Spurious emissions p. 35
4.3.1 Principle of the specification p. 35
4.3.2 Base Transceiver Station p. 37
4.3.2.1 General requirements p. 37
4.3.2.2 Additional requirements for co-existence with GSM systems on other frequency bands p. 38
4.3.2.3 Additional requirements for co-existence with 3 G p. 39
4.3.3 Mobile Station p. 40
4.4 Radio frequency tolerance p. 42
4.5 Output level dynamic operation p. 42
4.5.1 Base Transceiver Station p. 42
4.5.2 Mobile Station p. 42
4.6 Modulation accuracy p. 43
4.6.1 GMSK modulation p. 43
4.6.2 QPSK, AQPSK, 8-PSK, 16-QAM and 32-QAM modulations p. 43
4.6.2.1 RMS EVM p. 44
4.6.2.2 Origin Offset Suppression p. 45
4.6.2.3 Peak EVM p. 45
4.6.2.4 95:th percentile p. 45
4.6.3 Phase and amplitude coherency when using blind physical layer transmissions |R13| p. 46
4.7 Intermodulation attenuation p. 46
4.7.1 Base transceiver station p. 46
4.7.2 Intra BTS intermodulation attenuation p. 46
4.7.2.1 GSM 400, GSM 900, ER-GSM 900, DCS 1800 p. 47
4.7.2.1.1 Requirements for BTS except multicarrier BTS |R12| p. 47
4.7.2.1.2 Requirements for multicarrier BTS |R12| p. 47
4.7.2.2 MXM 850 and MXM 1900 p. 47
4.7.2.3 GSM 700, GSM 850 and PCS 1900 p. 48
4.7.3 Void
4.7.4 Mobile PBX (GSM 900 only) p. 48
5 Receiver characteristics p. 49
5.1 Blocking characteristics p. 49
5.1.1 Definitions of applicable frequency ranges |R9| p. 49
5.1.2 Requirements for MS |R9| p. 51
5.1.3 Requirements for BTS |R9| p. 53
5.1.4 Signal levels of blocking signal |R9| p. 54
5.1.5 Micro- and pico-BTS |R9| p. 59
5.2 AM suppression characteristics p. 59
5.3 Intermodulation characteristics p. 61
5.4 Spurious emissions p. 62
6 Transmitter/receiver performance p. 62
6.1a MS conditions |R12| p. 62
6.1b BTS conditions |R12| p. 63
6.1 Nominal Error Rates (NER) p. 64
6.1.1 GMSK modulation p. 65
6.1.1.1 General performance requirements |R9| p. 65
6.1.1.2 Requirements for MS |R9| p. 65
6.1.1.3 Requirements for BTS |R9| p. 65
6.1.2 QPSK/8-PSK modulation p. 66
6.1.3 16-QAM/32-QAM modulation |R7| p. 67
6.2 Reference sensitivity level p. 68
6.2.1 Circuit-switched channels |R9| p. 68
6.2.1a Reference performance in VAMOS mode |R9| p. 71
6.2.2 Packet-switched channels |R9| p. 72
6.2.3 Flexible Layer One |R9| p. 74
6.2.4 Repeated associated control channel performance |R9| p. 75
6.2.4a Extended Coverage control channel and data channel performance for EC-GSM-IoT |R13| p. 75
6.2.5 Enhanced MS receiver performance |R9| p. 75
6.2.6 Additional performance conditions |R9| p. 76
6.3 Reference interference level p. 76
6.3.1 GMSK modulated speech channels and associated control channels |R9| p. 76
6.3.2 Co-channel reference interference performance |R9| p. 77
6.3.2.1 MS requirements p. 77
6.3.2.2 BTS requirements p. 77
6.3.3 Adjacent channel reference interference performance |R9| p. 78
6.3.3.1 Normal symbol rate used p. 78
6.3.3.1.1 MS requirements p. 78
6.3.3.1.2 BTS requirements p. 79
6.3.3.2 Higher symbol rate used p. 79
6.3.3.2.1 MS requirements p. 80
6.3.3.2.2 BTS requirements p. 80
6.3.4 Reference interference performance - signal levels |R9| p. 80
6.3.5 Additional reference interference performance requirements and conditions |R9| p. 82
6.4 Erroneous frame indication performance p. 84
6.5 Random access and paging performance at high input levels p. 84
6.6 Frequency hopping performance under interference conditions p. 85
6.7 Incremental Redundancy Performance for EGPRS and EGPRS2 MS p. 85
