Content for TR 38.810 Word version: 16.7.0
2 References
3 Definitions, symbols and abbreviations
4 General
5 UE RF testing methodology
6 UE RRM testing methodology
7 UE demodulation and CSI testing methodology
8 Propagation conditions
...
...
2 References p. 10
3 Definitions, symbols and abbreviations p. 11
4 General p. 12
4.1 Device types and UE power classes p. 12
4.2 Testing configuration p. 13
4.3 Test interface p. 13
4.4 Equivalence criteria p. 13
5 UE RF testing methodology p. 15
5.1 General p. 15
5.2 Permitted test methods p. 15
5.2.1 Direct far field (DFF) p. 15
5.2.1.1 Description p. 15
5.2.1.2 Far-field criteria p. 16
5.2.1.3 Testing and calibration aspects p. 18
5.2.1.3.1 Calibration Measurement Procedure p. 18
5.2.1.3.2 Peak EIRP Measurement Procedure p. 18
5.2.1.3.3 TRP Measurement Procedure p. 19
5.2.1.3.4 Peak EIS Measurement Procedure p. 20
5.2.1.3.5 EVM Measurement Procedure p. 20
5.2.1.3.6 Blocking Measurement Procedure p. 21
5.2.1.3.7 TX Beam Peak direction search and EIRP Spherical Coverage p. 21
5.2.1.3.8 RX Beam Peak direction search and EIS Spherical Coverage p. 23
5.2.1.3.9 Beam Correspondence Tolerance p. 24
5.2.2 Direct far field (DFF) setup simplification for centre of beam measurements p. 25
5.2.2.1 Description p. 25
5.2.2.2 Far-field criteria p. 25
5.2.2.3 Testing and calibration aspects p. 25
5.2.3 Indirect far field (IFF) method 1 p. 25
5.2.3.1 Description p. 25
5.2.3.2 Far-field criteria p. 27
5.2.3.3 Testing and calibration aspects p. 27
5.2.4 Near field to far field transform (NFTF) p. 31
5.3 Test method applicability p. 34
6 UE RRM testing methodology p. 35
6.1 General p. 35
6.2 Measurement setup p. 35
6.2.1 Baseline setup p. 35
6.2.1.1 Description p. 35
6.2.1.2 Far-field criteria and Quiet Zone p. 37
6.2.1.3 Testing and calibration aspects p. 37
6.2.1.4 Test parameters and metrics p. 38
6.2.1.4.1 Test parameters and metrics required for UE RRM testing p. 38
6.2.1.4.2 Radiated requirements Reference point and Testing directions p. 38
6.2.1.4.3 Scenario 1 (1AoA RX beam peak) for Type 1 Requirements ("Fine" RX beams) and Mode 1 Configuration (S+N) p. 40
6.2.1.4.4 Scenario 1 (1AoA RX beam peak) for Type 2 Requirements ("Rough" RX beams) and Mode 1 Configuration (S+N) p. 41
6.2.1.4.5 Scenario 2 (1AoA RX non-beam peak) for Type 1 Requirements ("Fine" RX beams) and Mode 1 Configuration (S+N) p. 41
6.2.1.4.6 Scenario 2 (1AoA RX non-beam peak) for Type 2 Requirements ("Rough" RX beams) and Mode 1 Configuration (S+N) p. 42
6.2.1.4.7 Scenario 3 (2AoA) for Mode 1 Configuration (S+N) p. 42
6.2.1.4.8 Noc level for multi-band capable devices p. 42
6.2.1.4.9 Noc level for CA p. 42
6.3 Summary of initial uncertainty assessment p. 43
7 UE demodulation and CSI testing methodology p. 43
7.1 General p. 43
7.2 Measurement setup p. 43
7.2.1 Baseline setup p. 43
7.2.1.1 Description p. 43
7.2.1.2 Measurement distance p. 45
7.2.1.3 Test parameters p. 45
7.2.1.4 Test metrics p. 48
8 Propagation conditions p. 49
8.1 General p. 49
8.2 Multi-path fading propagation conditions p. 49
8.2.1 Single probe channel modelling methodology p. 49
8.2.2 Path Delay grid for channel models p. 53
8.3 Static propagation conditions p. 54
