Tech-invite  3GPPspace  IETFspace
21  22  23  24  25  26  27  28  29  31  32  33  34  35  36  37  38  4‑5x

Content for  TS 38.413  Word version:  18.2.0

Top   Top   Up   Prev   Next
1…   4…   8…   8.2…   8.2.3…   8.3…   8.3.4…   8.4…   8.4.3…   8.5…   8.7…   8.8…   8.10…   8.12…   8.17…   9…   9.2…   9.2.2…   9.2.3…   9.2.4…   9.2.6…   9.2.7…   9.2.9…   9.2.11…   9.2.16…   9.2.17…   9.3…   9.3.1.21…   9.3.1.41…   9.3.1.61…   9.3.1.81…   9.3.1.101…   9.3.1.121…   9.3.1.141…   9.3.1.161…   9.3.1.181…   9.3.1.205…   9.3.1.222…   9.3.1.245…   9.3.2…   9.3.3…   9.3.3.21…   9.3.3.42…   9.3.4…   9.3.4.10…   9.3.5…   9.4…   9.4.4   9.4.5   9.4.6…   9.5…   10… 
9.3.1.245 Network Controlled Repeater Authorized  9.3.1.246 Aerial UE Subscription Information  9.3.1.247 NR A2X Services Authorized  9.3.1.248 LTE A2X Services Authorized  9.3.1.249 A2X PC5 QoS Parameters  9.3.1.250 Clock Quality Reporting Control Information  9.3.1.251 Clock Quality Acceptance Criteria  9.3.1.252 RAN Timing Synchronisation Status Information  9.3.1.253 Clock Accuracy  9.3.1.254 RAN TSS Scope  9.3.1.255 Burst Arrival Time Window  9.3.1.256 Periodicity Range  9.3.1.257 TSC Traffic Characteristics Feedback  9.3.1.258 TSC Feedback Information  9.3.1.259 Mobile IAB Authorized  9.3.1.260 Mobile IAB-MT User Location Information  9.3.1.261 Partially Allowed NSSAI  9.3.1.262 Associated Session ID  9.3.1.263 MBS Assistance Information  9.3.1.264 PDU Set QoS Information  9.3.1.265 N6 Jitter Information  9.3.1.266 ECN Marking or Congestion Information Reporting Request  9.3.1.267 ECN Marking or Congestion Information Reporting Status  9.3.1.268 PDU Set based Handling Indicator  9.3.1.269 Ranging and Sidelink Positioning Service Information  9.3.1.270 RSPP Transport QoS Parameters  9.3.1.271 User Plane Failure Indication  9.3.1.272 QoE and RVQoE Reporting Paths 
...

 

9.3.1.245  Network Controlled Repeater Authorized |R18|  p. 311

This IE provides the authorization status of the UE to act as a Network Controlled Repeater.
IE/Group Name Pre­sence Range IE type and reference Semantics description
Network Controlled Repeater AuthorizedMENUMERATED (authorized, not authorized, ...)Indicates whether the UE is authorized as Network Controlled Repeater
Up

9.3.1.246  Aerial UE Subscription Information |R18|  p. 311

This information element is used by the NG-RAN node to know if the UE is allowed to use aerial function, refer to TS 23.501.
IE/Group Name Pre­sence Range IE type and reference Semantics description
Aerial UE Subscription InformationMENUMERATED (allowed, not allowed,…)
Up

9.3.1.247  NR A2X Services Authorized |R18|  p. 311

This IE provides information on the authorization status of the UE to use the NR sidelink for A2X services.
IE/Group Name Pre­sence Range IE type and reference Semantics description
UAV UEOENUMERATED (authorized, not authorized, ...)Indicates whether the UE is authorized as UAV UE
UAV controller UEOENUMERATED (authorized, not authorized, ...)Indicates whether the UE is authorized as UAV controller UE
Up

9.3.1.248  LTE A2X Services Authorized |R18|  p. 311

This IE provides information on the authorization status of the UE to use the LTE sidelink for A2X services.
IE/Group Name Pre­sence Range IE type and reference Semantics description
UAV UEOENUMERATED (authorized, not authorized, ...)Indicates whether the UE is authorized as UAV UE
UAV controller UEOENUMERATED (authorized, not authorized, ...)Indicates whether the UE is authorized as UAV controller UE
Up

9.3.1.249  A2X PC5 QoS Parameters |R18|  p. 312

This IE provides information on the PC5 QoS parameters of the UE's sidelink communication for A2X.
IE/Group Name Pre­sence Range IE type and reference Semantics description
A2X PC5 QoS Flow List1
>A2X PC5 QoS Flow Item1..<maxnoofPC5QoSFlows>
>>A2X PQIMINTEGER (0..255, …)PQI is a special 5QI as specified in TS 23.501.
>>A2X PC5 Flow Bit Rates0..1Only applies for GBR QoS Flows.
>>>A2X Guaranteed Flow Bit RateMBit Rate
9.3.1.4		Guaranteed Bit Rate for the PC5 QoS flow. Details in TS 23.501.
>>>A2X Maximum Flow Bit RateMBit Rate
9.3.1.4		Maximum Bit Rate for the PC5 QoS flow. Details in TS 23.501.
>>A2X RangeOENUMERATED (m50, m80, m180, m200, m350, m400, m500, m700, m1000, …)Only applies for groupcast
A2X PC5 Link Aggregate Bit RatesOBit Rate
9.3.1.4		Only applies for non-GBR QoS Flows.
Range bound Explanation
maxnoofPC5QoSFlowsMaximum no. of PC5 QoS flows allowed towards one UE. Value is 2048.
Up

9.3.1.250  Clock Quality Reporting Control Information |R18|  p. 312

This IE indicates the clock quality reporting control information as defined in TS 23.501.
IE/Group Name Pre­sence Range IE type and reference Semantics description
CHOICE Clock Quality Detail LevelM
>clock quality metricsNULL
>clock quality acceptance indication
>>Clock Quality Acceptance CriteriaM 9.3.1.251
Up

9.3.1.251  Clock Quality Acceptance Criteria |R18|  p. 312

This IE indicates the clock quality acceptance criteria as defined in TS 23.501.
IE/Group Name Pre­sence Range IE type and reference Semantics description
Synchronisation StateOBIT STRING {
locked (0),
holdover (1),
freeRun (2) }
(SIZE (8, …))		Each position in the bitmap represents a synchronisation state.
If a bit is set to "1", the respective synchronisation state is acceptable. If a bit is set to "0", the respective synchronisation state is not acceptable.
Bits 3-7 reserved for future use.
Traceable to UTCOENUMERATED (true, …)
Traceable to GNSSOENUMERATED (true, …)
Clock Frequency StabilityOBIT STRING (SIZE (16))Indicates the offsetScaledLogVariance as specified in TS 23.501.
Clock AccuracyOINTEGER (1..40000000, …)Clock accuracy expressed in units of 25 ns.
Parent Time SourceOBIT STRING {
syncE (0),
pTP (1),
gNSS (2),
atomicClock (3),
terrestrialRadio (4),
serialTimeCode (5),
nTP (6),
handset (7),
other (8) }
(SIZE (16, …))		 Each position in the bitmap represents a parent time source. If a bit is set to "1", the respective parent time source is acceptable. If a bit is set to "0", the respective parent time source is not acceptable.
Bits 9-15 reserved for future use.
Up

9.3.1.252  RAN Timing Synchronisation Status Information |R18|  p. 313

This IE indicates the RAN timing synchronisation status information provided towards the AMF as defined in TS 23.501.
IE/Group Name Pre­sence Range IE type and reference Semantics description
Synchronisation StateOENUMERATED (locked, holdover, freeRun, …)
Traceable to UTCOENUMERATED (true, false, …)
Traceable to GNSSOENUMERATED (true, false, …)
Clock Frequency StabilityOBIT STRING (SIZE (16))Indicates the offsetScaledLogVariance as specified in TS 23.501.
Clock AccuracyO 9.3.1.253
Parent Time SourceOENUMERATED (syncE, pTP, gNSS, atomicClock, terrestrialRadio, serialTimeCode, nTP, handSet, other, …)
Up

9.3.1.253  Clock Accuracy |R18|  p. 313

This IE indicates the clock accuracy as defined in TS 23.501.
IE/Group Name Pre­sence Range IE type and reference Semantics description
CHOICE Clock AccuracyM
>Value
>>Clock Accuracy ValueMINTEGER (1.. 40000000, …)Indicates the absolute clock accuracy value. Unit in 25ns.
>Index
>>Clock Accuracy IndexMINTEGER (32..47, ...) Indicates the clockAccuracy enumeration value specified in Table 5 of clause 7.6.2.6 of IEEE Std 1588 [55].
Up

9.3.1.254  RAN TSS Scope |R18|  p. 314

This IE indicates the scope of the RAN timing synchronisation status as defined in TS 23.501.
IE/Group Name Pre­sence Range IE type and reference Semantics description
CHOICE RAN TSS scopeM
>RAN node level
>>Global gNB IDM 9.3.1.6
>cell list level
>>RAN TSS Cell List1
>>>RAN TSS Cell Item1..<maxnoofCellsTSS>
>>>>NR CGIM 9.3.1.7
Range bound Explanation
maxnoofCellsTSSMaximum no. of Cell IDs in the scope of the RAN timing synchronisation status. Value is 16384.
Up

9.3.1.255  Burst Arrival Time Window |R18|  p. 314

This IE indicates the burst arrival time window of the TSC QoS flow as defined in TS 23.501.
IE/Group Name Pre­sence Range IE type and reference Semantics description
Burst Arrival Time Window StartMINTEGER (0..640000, …)Start of the burst arrival time window calculated with reference to the Burst Arrival Time IE, expressed in units of 1 us. Integer values are negative.
Burst Arrival Time Window EndMINTEGER (0..640000, …)End of the burst arrival time window calculated with reference to the Burst Arrival Time IE, expressed in units of 1 us. Integer values are positive.
Up

9.3.1.256  Periodicity Range |R18|  p. 314

This IE indicates the periodicity range for the TSC QoS flow as defined in TS 23.501.
IE/Group Name Pre­sence Range IE type and reference Semantics description
CHOICE Periodicity RangeM
>Periodicity Bound
>>Periodicity Lower BoundMPeriodicity
9.3.1.132
>>Periodicity Upper BoundMPeriodicity
9.3.1.132
>Periodicity List
>>Allowed Periodicity List1
>>>Allowed Periodicity Item1..<maxnoofPeriodicities>
>>>>Allowed PeriodicityMPeriodicity
9.3.1.132
Range bound Explanation
maxnoofPeriodicitiesMaximum no. of allowed periodicities. Value is 8.
Up

9.3.1.257  TSC Traffic Characteristics Feedback |R18|  p. 315

This IE provides the TSC traffic characteristics feedback of a TSC QoS flow (see TS 23.501.
IE/Group Name Pre­sence Range IE type and reference Semantics description
TSC Feedback Information DownlinkOTSC Feedback Information
9.3.1.258
TSC Feedback Information UplinkOTSC Feedback Information
9.3.1.258
Up

9.3.1.258  TSC Feedback Information |R18|  p. 315

This IE provides the TSC feedback information for a TSC QoS flow in the uplink or downlink (see TS 23.501).
IE/Group Name Pre­sence Range IE type and reference Semantics description
Burst Arrival Time OffsetMINTEGER (-640000..640000, …)Burst arrival time offset expressed in units of 1 us.
Adjusted PeriodicityOPeriodicity
9.3.1.132		Not applicable to reactive RAN feedback.
Up

9.3.1.259  Mobile IAB Authorized |R18|  p. 315

This IE provides information about the authorization status of the mobile IAB-node.
IE/Group Name Pre­sence Range IE type and reference Semantics description
Mobile IAB AuthorizedMENUMERATED (authorized, not authorized, ...)Indicates the mobile IAB-node authorization status.
Up

9.3.1.260  Mobile IAB-MT User Location Information |R18|  p. 315

This IE contains the NR CGI and the TAI for the co-located mobile IAB-MT of the UE's serving mobile IAB-DU.
IE/Group Name Pre­sence Range IE type and reference Semantics description
NR CGIM 9.3.1.7The NR CGI of the cell, which is the serving cell of the mobile IAB-MT co-located with the mobile IAB-DU that serves the UE.
TAIO 9.3.3.11The TAI supported by the cell, which is the serving cell of the mobile IAB-MT co-located with the UE's serving mobile IAB-DU.
Up

9.3.1.261  Partially Allowed NSSAI |R18|  p. 316

This IE contains a list of S-NSSAI(s) partially permitted by the network for the UE.
IE/Group Name Pre­sence Range IE type and reference Semantics description
Partially Allowed S-NSSAI List1
>Partially Allowed S-NSSAI Item1..<maxnoofPartiallyAllowedS-NSSAIs>
>>S-NSSAIM 9.3.1.24
Range bound Explanation
maxnoofPartiallyAllowedS-NSSAIsMaximum no. of partially allowed S-NSSAI. Value is 8.
Up

9.3.1.262  Associated Session ID |R18|  p. 316

This IE is used to associate MBS Session IDs providing identical user data.
IE/Group Name Pre­sence Range IE type and reference Semantics description
Associated Session IDMOCTET STRINGCoded as the AssociatedSessionId IE defined in TS 29.571.
The gNB does not interpret the content of the Associated Session ID IE.
Up

9.3.1.263  MBS Assistance Information |R18|  p. 316

This IE provides MBS Assistance Information as specified in TS 38.300 and TS 23.247.
IE/Group Name Pre­sence Range IE type and reference Semantics description
MBS Assistance InformationMENUMERATED (true, ...)
Up

9.3.1.264  PDU Set QoS Information |R18|  p. 316

This IE defines the PDU Set QoS Parameters to be applied to a QoS flow.
IE/Group Name Pre­sence Range IE type and reference Semantics description
PDU Set Packet Delay BudgetOExtended Packet Delay Budget
9.3.1.135		PDU Set Delay Budget as specified in TS 23.501.
PDU Set Error RateOPacket Error Rate
9.3.1.81		PDU Set Error Rate as specified in TS 23.501.
PDU Set Integrated Handling InformationOENUMERATED (true, false, …)PDU Set Integrated Handling Information as specified in TS 23.501.
Up

9.3.1.265  N6 Jitter Information |R18|  p. 317

This IE indicates the N6 jitter information associated with the Periodicity in downlink.
IE/Group Name Pre­sence Range IE type and reference Semantics description
N6 Jitter Lower BoundMINTEGER (-127.. 127)Indicates the lower bound of the N6 jitter. The unit is: 0.5ms.
N6 Jitter Upper BoundMINTEGER (-127.. 127)Indicates the upper bound of the N6 jitter. The unit is: 0.5ms.
Up

9.3.1.266  ECN Marking or Congestion Information Reporting Request |R18|  p. 317

This IE indicates to the NG-RAN node to perform ECN marking or to report information for ECN marking or to report congestion information for a QoS Flow.
IE/Group Name Pre­sence Range IE type and reference Semantics description
CHOICE ECN Marking or Congestion Information RequestM
>ECN Marking at RAN
>>ECN Marking at NG-RAN RequestMENUMERATED (ul, dl, both, stop, …)
>ECN Marking at UPF
>>ECN Marking at UPF RequestMENUMERATED (ul, dl, both, stop, …)
>Congestion Information
>>Congestion Information RequestMENUMERATED (ul, dl, both, stop, …)
Up

9.3.1.267  ECN Marking or Congestion Information Reporting Status |R18|  p. 317

This IE contains a list of QoS flows with activation status information for NG-RAN node to perform ECN marking or to report information for ECN marking or to report congestion information reporting.
IE/Group Name Pre­sence Range IE type and reference Semantics description
ECN Marking or Congestion Information Reporting Status Item1..<maxnoofQoSFlows >
>QoS Flow IdentifierM 9.3.1.51
>Activation StatusMENUMERATED (active, not Active, ,…)Indicates whether ECN marking at NG-RAN or reporting information for ECN marking at UPF or congestion information reporting is active or not active.
Range bound Explanation
maxnoofQoSFlowsMaximum no. of QoS flows allowed within one PDU session. Value is 64.
Up

9.3.1.268  PDU Set based Handling Indicator |R18|  p. 318

This IE indicates whether PDU Set based Handling is supported for the NG-RAN node.
IE/Group Name Pre­sence Range IE type and reference Semantics description
PDU Set based Handling IndicatorMENUMERATED (supported, …)
Up

9.3.1.269  Ranging and Sidelink Positioning Service Information |R18|  p. 318

9.3.1.270  RSPP Transport QoS Parameters |R18|  p. 318

9.3.1.271  User Plane Failure Indication |R18|  p. 319

9.3.1.272  QoE and RVQoE Reporting Paths |R18|  p. 319

Up   Top   ToC