Content for TS 38.141-2 Word version: 18.6.0
8 Radiated performance requirements
8.1 General
8.2 OTA performance requirements for PUSCH
8.3 OTA performance requirements for PUCCH
8.4 OTA performance requirements for PRACH
8 Radiated performance requirements p. 209
8.1 General p. 209
8.1.0 Scope and definitions p. 209
8.1.1 OTA demodulation branches p. 209
8.1.2 Applicability rule p. 210
8.1.2.0 General p. 210
8.1.2.1 Applicability of PUSCH performance requirements p. 210
8.1.2.1.1 Applicability of requirements for different subcarrier spacings p. 210
8.1.2.1.2 Applicability of requirements for different channel bandwidths p. 210
8.1.2.1.3 Applicability of requirements for different configurations p. 210
8.1.2.1.4 Applicability of requirements for uplink carrier aggregation p. 210
8.1.2.1.5 Applicability of requirements for TDD with different UL-DL patterns p. 210
8.1.2.1.6 Applicability of UL timing adjustment requirements for different scenarios p. 211
8.1.2.1.7 Applicability of 2-step RA type requirements for different subcarrier spacings p. 211
8.1.2.1.8 Applicability of PUSCH with 0.001% BLER requirements p. 211
8.1.2.1.9 Applicability of PUSCH repetition type A requirements p. 211
8.1.2.2 Applicability of PUCCH performance requirements p. 211
8.1.2.2.1 Applicability of requirements for different formats p. 211
8.1.2.2.2 Applicability of requirements for different subcarrier spacings p. 211
8.1.2.2.3 Applicability of requirements for different channel bandwidths p. 211
8.1.2.2.4 Applicability of requirements for different configurations p. 211
8.1.2.2.5 Applicability of requirements for multi-slot PUCCH p. 212
8.1.2.2.6 Applicability of requirements for PUCCH sub-slot based repetition p. 212
8.1.2.3 Applicability of PRACH performance requirements p. 212
8.1.2.3.1 Applicability of requirements for different formats p. 212
8.1.2.3.2 Applicability of requirements for different subcarrier spacings p. 212
8.1.2.3.3 Applicability of requirements for different channel bandwidths p. 212
8.1.2.3.4 Applicability of requirements for different restricted set types of long PRACH format 0 p. 212
8.1.2.4 Applicability of PUSCH for high speed train performance requirements p. 212
8.1.2.4.1 Applicability of requirements for different speeds p. 212
8.1.2.4.2 Applicability of requirements for 1T1R p. 212
8.1.2.4.3 Applicability of requirements for different channel bandwidths p. 213
8.1.2.4.4 Appliability of requirements for different DM-RS configurations p. 213
8.1.2.5 Applicability of interlaced PUSCH performance requirements p. 213
8.1.2.5.1 General applicability of interlaced PUSCH performance requirements p. 213
8.1.2.5.2 Applicability of requirements for different subcarrier spacings p. 213
8.1.2.5.3 Applicability of requirements for different channel bandwidths p. 213
8.1.2.5.4 Applicability of requirements for different configurations p. 213
8.1.2.5.5 Applicability of CG-UCI multiplexed on PUSCH requirements p. 213
8.1.2.6 Applicability of interlaced PUCCH performance requirements p. 214
8.1.2.6.1 General applicability of interlaced PUCCH performance requirements p. 214
8.1.2.6.2 Applicability of requirements for different formats p. 214
8.1.2.6.3 Applicability of requirements for different subcarrier spacings p. 214
8.1.2.6.4 Applicability of requirements for different channel bandwidths p. 214
8.1.2.7 Applicability of performance requirements for PRACH with LRA =1151 and LRA =571 p. 214
8.1.2.7.1 Applicability of requirements for different formats p. 214
8.1.2.7.2 Applicability of requirements for different subcarrier spacings p. 214
8.1.2.7.3 Applicability of requirements for different channel bandwidths p. 214
8.1.2.8 Applicability of performance requirements for PUSCH with TB over Multi-Slots p. 214
8.1.2.9 Applicability of performance requirements for PUSCH with DM-RS bundling p. 215
8.1.2.9.1 Applicability of requirements for TDD different subcarrier spacings p. 215
8.1.2.9.2 Applicability of requirements for TDD with different UL-DL patterns p. 215
8.1.2.9.3 Applicability of requirements for different receiver antenna connectors p. 215
8.1.2.10 Applicability of performance requirements for PUCCH with DM-RS bundling p. 215
8.2 OTA performance requirements for PUSCH p. 215
8.2.1 Performance requirements for PUSCH with transform precoding disabled p. 215
8.2.1.1 Definition and applicability p. 215
8.2.1.2 Minimum Requirement p. 215
8.2.1.3 Test purpose p. 216
8.2.1.4 Method of test p. 216
8.2.1.4.1 Initial conditions p. 216
8.2.1.4.2 Procedure p. 216
8.2.1.5 Test Requirement p. 218
8.2.2 Performance requirements for PUSCH with transform precoding enabled p. 227
8.2.2.1 Definition and applicability p. 227
8.2.2.2 Minimum Requirement p. 227
8.2.2.3 Test Purpose p. 227
8.2.2.4 Method of test p. 227
8.2.2.4.1 Initial Conditions p. 227
8.2.2.4.2 Procedure p. 227
8.2.2.5 Test Requirement p. 229
8.2.3 Performance requirements for UCI multiplexed on PUSCH p. 231
8.2.3.1 Definition and applicability p. 231
8.2.3.2 Minimum Requirement p. 231
8.2.3.3 Test purpose p. 232
8.2.3.4 Method of test p. 232
8.2.3.4.1 Initial conditions p. 232
8.2.3.4.2 Procedure p. 232
8.2.3.5 Test Requirement p. 234
8.2.4 Performance requirements for PUSCH for high speed train p. 236
8.2.4.1 Definition and applicability p. 236
8.2.4.2 Minimum Requirement p. 236
8.2.4.3 Test Purpose p. 236
8.2.4.4 Method of test p. 236
8.2.4.4.1 Initial Conditions p. 236
8.2.4.4.2 Procedure p. 237
8.2.4.5 Test Requirement for BS Type 1-O p. 239
8.2.4.6 Test Requirement for BS Type 2-O p. 241
8.2.5 Performance requirements for UL timing adjustment p. 241
8.2.5.1 Definition and applicability p. 241
8.2.5.2 Minimum Requirement p. 242
8.2.5.3 Test Purpose p. 242
8.2.5.4 Method of test p. 242
8.2.5.4.1 Initial Conditions p. 242
8.2.5.4.2 Procedure p. 242
8.2.5.5 Test Requirement for High Speed Train for BS type 1-O p. 245
8.2.5.5a Test Requirement for High Speed Train for BS type 2-O p. 246
8.2.5.6 Test Requirement for Normal Mode p. 246
8.2.6 Performance requirements for PUSCH with 0.001% BLER p. 246
8.2.6.1 Definition and applicability p. 246
8.2.6.2 Minimum Requirement p. 247
8.2.6.3 Test Purpose p. 247
8.2.6.4 Method of test p. 247
8.2.6.4.1 Initial Conditions p. 247
8.2.6.4.2 Procedure p. 247
8.2.6.5 Test requirement p. 248
8.2.7 Performance requirements for PUSCH repetition Type A p. 250
8.2.7.1 Definition and applicability p. 250
8.2.7.2 Minimum Requirement p. 250
8.2.7.3 Test purpose p. 250
8.2.7.4 Method of test p. 250
8.2.7.4.1 Initial conditions p. 250
8.2.7.4.2 Procedure p. 250
8.2.7.5 Test Requirement p. 252
8.2.8.1 Definition and applicability p. 254
8.2.8.2 Minimum Requirement p. 255
8.2.8.3 Test purpose p. 255
8.2.8.4 Method of test p. 255
8.2.8.4.1 Initial conditions p. 255
8.2.8.4.2 Procedure p. 255
8.2.8.5 Test Requirement p. 257
8.2.9 Performance requirements for MsgA PUSCH p. 259
8.2.9.1 Definition and applicability p. 259
8.2.9.2 Minimum Requirement p. 259
8.2.9.3 Test Purpose p. 259
8.2.9.4 Method of test p. 259
8.2.9.4.1 Initial Conditions p. 259
8.2.9.4.2 Procedure p. 259
8.2.9.5 Test Requirement p. 262
8.2.10 Requirements for interlaced PUSCH p. 264
8.2.10.1 Definition and applicability p. 264
8.2.10.2 Minimum Requirement p. 264
8.2.10.3 Test Purpose p. 264
8.2.10.4 Method of test p. 264
8.2.10.4.1 Initial Conditions p. 264
8.2.10.4.2 Procedure p. 265
8.2.10.5 Test Requirement p. 266
8.2.11 Performance requirements for CG-UCI multiplexed on interlaced PUSCH p. 267
8.2.11.1 Definition and applicability p. 267
8.2.11.2 Minimum Requirement p. 267
8.2.11.3 Test purpose p. 267
8.2.11.4 Method of test p. 267
8.2.11.4.1 Initial conditions p. 267
8.2.11.4.2 Procedure p. 267
8.2.11.5 Test Requirement p. 269
8.2.12 Performance requirements for TB processing over multi-slot PUSCH (TBoMS) p. 269
8.2.12.1 Definition and applicability p. 269
8.2.12.2 Minimum Requirement p. 269
8.2.12.3 Test Purpose p. 270
8.2.12.4 Method of test p. 270
8.2.12.4.1 Initial Conditions p. 270
8.2.12.4.2 Procedure p. 270
8.2.12.5 Test Requirement p. 272
8.2.13 Performance requirements for PUSCH with DMRS bundling p. 273
8.2.13.1 Definition and applicability p. 273
8.2.13.2 Minimum Requirement p. 274
8.2.13.3 Test Purpose p. 274
8.2.13.4 Method of test p. 274
8.2.13.4.1 Initial Conditions p. 274
8.2.13.4.2 Procedure p. 274
8.2.13.5 Test Requirement p. 276
8.3 OTA performance requirements for PUCCH p. 279
8.3.1 Performance requirements for PUCCH format 0 p. 279
8.3.1.1 Definition and applicability p. 279
8.3.1.2 Minimum Requirement p. 279
8.3.1.3 Test purpose p. 279
8.3.1.4 Method of test p. 279
8.3.1.4.1 Initial conditions p. 279
8.3.1.4.2 Procedure p. 279
8.3.1.5 Test Requirement p. 281
8.3.2 Performance requirements for PUCCH format 1 p. 282
8.3.2.1 NACK to ACK detection p. 282
8.3.2.1.1 Definition and applicability p. 282
8.3.2.1.2 Minimum Requirement p. 283
8.3.2.1.3 Test purpose p. 283
8.3.2.1.4 Method of test p. 283
8.3.2.1.5 Test Requirement p. 285
8.3.2.2 ACK missed detection p. 286
8.3.2.2.1 Definition and applicability p. 286
8.3.2.2.2 Minimum Requirement p. 287
8.3.2.2.3 Test purpose p. 287
8.3.2.2.4 Method of test p. 287
8.3.2.2.5 Test Requirement p. 289
8.3.3 Performance requirements for PUCCH format 2 p. 290
8.3.3.1 ACK missed detection performance requirements p. 290
8.3.3.1.1 Definition and applicability p. 290
8.3.3.1.2 Minimum Requirement p. 290
8.3.3.1.3 Test Purpose p. 290
8.3.3.1.4 Method of test p. 290
8.3.3.1.5 Test requirement p. 292
8.3.3.2 UCI BLER performance requirements p. 293
8.3.3.2.1 Definition and applicability p. 293
8.3.3.2.2 Minimum Requirement p. 294
8.3.3.2.3 Test Purpose p. 294
8.3.3.2.4 Method of test p. 294
8.3.3.2.5 Test requirement p. 295
8.3.4 Performance requirements for PUCCH format 3 p. 296
8.3.4.1 Definition and applicability p. 296
8.3.4.2 Minimum requirement p. 297
8.3.4.3 Test purpose p. 297
8.3.4.4 Method of test p. 297
8.3.4.4.1 Initial conditions p. 297
8.3.4.4.2 Procedure p. 297
8.3.4.5 Test requirement p. 298
8.3.5 Performance requirements for PUCCH format 4 p. 300
8.3.5.1 Definition and applicability p. 300
8.3.5.2 Minimum requirement p. 300
8.3.5.3 Test purpose p. 300
8.3.5.4 Method of test p. 300
8.3.5.4.1 Initial conditions p. 300
8.3.5.4.2 Procedure p. 300
8.3.5.5 Test requirement p. 302
8.3.6 Performance requirements for multi-slot PUCCH format p. 303
8.3.7 Performance requirements for interlaced PUCCH format 0 p. 307
8.3.7.1 Definition and applicability p. 307
8.3.7.2 Minimum Requirement p. 308
8.3.7.3 Test purpose p. 308
8.3.7.4 Method of test p. 308
8.3.7.4.1 Initial conditions p. 308
8.3.7.4.2 Procedure p. 308
8.3.7.5 Test Requirement p. 309
8.3.8 Performance requirements for interlaced PUCCH format 1 p. 309
8.3.8.1 NACK to ACK detection p. 309
8.3.8.1.1 Definition and applicability p. 309
8.3.8.1.2 Minimum Requirement p. 310
8.3.8.1.3 Test purpose p. 310
8.3.8.1.4 Method of test p. 310
8.3.8.1.5 Test Requirement p. 311
8.3.8.2 ACK missed detection p. 311
8.3.8.2.1 Definition and applicability p. 311
8.3.8.2.2 Minimum Requirement p. 312
8.3.8.2.3 Test purpose p. 312
8.3.8.2.4 Method of test p. 312
8.3.8.2.5 Test Requirement p. 313
8.3.9 Performance requirements for interlaced PUCCH format 2 p. 314
8.3.9.1 Definition and applicability p. 314
8.3.9.2 Minimum Requirement p. 314
8.3.9.3 Test Purpose p. 314
8.3.9.4 Method of test p. 314
8.3.9.4.1 Initial conditions p. 314
8.3.9.4.2 Procedure p. 314
8.3.9.5 Test requirement p. 315
8.3.10 Performance requirements for interlaced PUCCH format 3 p. 316
8.3.10.1 Definition and applicability p. 316
8.3.10.2 Minimum Requirement p. 316
8.3.10.3 Test Purpose p. 316
8.3.10.4 Method of test p. 316
8.3.10.4.1 Initial conditions p. 316
8.3.10.4.2 Procedure p. 316
8.3.10.5 Test requirement p. 317
8.3.11 Performance requirements for PUCCH sub-slot based repetition format 0 p. 318
8.3.11.1 Definition and applicability p. 318
8.3.11.2 Minimum Requirement p. 318
8.3.11.3 Test purpose p. 318
8.3.11.4 Method of test p. 319
8.3.11.4.1 Initial conditions p. 319
8.3.11.4.2 Procedure p. 319
8.3.11.5 Test Requirement p. 320
8.3.12 Performance requirements PUCCH format 1 with DM-RS bundling p. 320
8.3.12.1 NACK to ACK detection p. 320
8.3.12.1.1 Definition and applicability p. 320
8.3.12.1.2 Minimum Requirement p. 321
8.3.12.1.3 Test purpose p. 321
8.3.12.1.4 Method of test p. 321
8.3.12.1.4.1 Initial conditions p. 321
8.3.12.1.4.2 Procedure p. 321
8.3.12.1.5 Test Requirement p. 322
8.3.12.2 ACK missed detection p. 323
8.3.12.2.1 Definition and applicability p. 323
8.3.12.2.2 Minimum Requirement p. 324
8.3.12.2.3 Test purpose p. 324
8.3.12.2.4 Method of test p. 324
8.3.12.2.4.1 Initial conditions p. 324
8.3.12.2.4.2 Procedure p. 324
8.3.12.2.5 Test Requirement p. 326
8.3.13 Performance requirements for PUCCH format 3 with DM-RS bundling p. 327
8.3.13.1 Definition and applicability p. 327
8.3.13.2 Minimum requirement p. 327
8.3.13.3 Test purpose p. 327
8.3.13.4 Method of test p. 327
8.3.13.4.1 Initial conditions p. 327
8.3.13.4.2 Procedure p. 327
8.3.13.5 Test requirement p. 329
8.4 OTA performance requirements for PRACH p. 330
8.4.1 PRACH false alarm probability and missed detection p. 330
8.4.1.1 Definition and applicability p. 330
8.4.1.2 Minimum requirement p. 330
8.4.1.3 Test purpose p. 330
8.4.1.4 Method of test p. 330
8.4.1.4.1 Initial conditions p. 330
8.4.1.4.2 Procedure p. 331
8.4.1.5 Test requirement for Normal Mode p. 333
8.4.1.6 Test requirement for high speed train p. 335
8.4.1.7 Test requirement for PRACH with LRA=1151 and LRA=571 p. 336
