Content for TS 38.141-2 Word version: 18.6.0
1 Scope p. 19
The present document specifies the Radio Frequency (RF) test methods and conformance requirements for NR Base Station (BS) type 1-H, BS type 1-O and BS type 2-O. These have been derived from, and are consistent with the radiated requirements for BS type 1-H, BS type 1-O and BS type 2-O in BS specification defined in TS 38.104.
A BS type 1-C only has conducted requirements so it does not require compliance to this specification.
A BS type 1-H has both conducted and radiated requirements so it requires compliance to the applicable requirements of this specification and TS 38.141-1.
BS type 1-O and BS type 2-O have only radiated requirements so they require compliance to this specification only.
2 References p. 19
The following documents contain provisions which, through reference in this text, constitute provisions of the present document.
- References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific.
- For a specific reference, subsequent revisions do not apply.
- For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document.
[1]
TR 21.905: "Vocabulary for 3GPP Specifications"
[2]
TS 38.104: "NR Base Station (BS) radio transmission and reception"
[3]
TS 38.141-1: "NR, Base Station (BS) conformance testing, Part 1: Conducted conformance testing"
[4]
Recommendation ITU-R M.1545: "Measurement uncertainty as it applies to test limits for the terrestrial component of International Mobile Telecommunications-2000"
[5]
ITU-R Recommendation SM.329: "Unwanted emissions in the spurious domain"
[6] Void
[7]
IEC 60 721-3-3: "Classification of environmental conditions - Part 3-3: Classification of groups of environmental parameters and their severities - Stationary use at weather protected locations"
[8]
IEC 60 721-3-4: "Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Clause 4: Stationary use at non-weather protected locations"
[9]
IEC 60 721: "Classification of environmental conditions"
[10]
IEC 60 068-2-1 (2007): "Environmental testing - Part 2: Tests. Tests A: Cold"
[11]
IEC 60 068-2-2: (2007): "Environmental testing - Part 2: Tests. Tests B: Dry heat"
[12]
IEC 60 068-2-6: (2007): "Environmental testing - Part 2: Tests - Test Fc: Vibration (sinusoidal)"
[13]
Recommendation ITU-R M.328: "Spectra and bandwidth of emissions"
[14]
FCC publication number 662911: "Emissions Testing of Transmitters with Multiple Outputs in the Same Band".
[15]
ECC/DEC/(17)06: "The harmonised use of the frequency bands 1427-1452 MHz and 1492-1518 MHz for Mobile/Fixed Communications Networks Supplemental Downlink (MFCN SDL)"
[16] Void
[17] Void
[18]
TS 36.104: "E-UTRA; Base Station (BS) radio transmission and reception"
[19]
TS 38.212: "NR; Multiplexing and channel coding"
[20]
TS 38.211: "NR; Physical channels and modulation"
[21]
TS 38.214: "NR; Physical layer procedures for data"
[22]
TS 38.331: "NR; Radio Resource Control (RRC) protocol specification"
[23]
TR 38.901: "Study on channel model for frequencies from 0.5 to 100 GHz"
[24]
TS 38.101-1: "NR; User Equipment (UE) radio transmission and reception; Part 1: Range 1 Standalone"
[25]
TS 38.101-2: "NR; User Equipment (UE) radio transmission and reception; Part 2: Range 2 Standalone"
[26]
ERC Recommendation 74-01: "Unwanted emissions in the spurious domain"
[27]
TR 25.942: "RF system scenarios".
[28]
ITU-T Recommendation O.150, "Equipment for the measurement of digital and analogue/digital parameters"
[29]
TR 37.941: "Radio Frequency (RF) conformance testing background for radiated Base Station (BS) requirements"
[30]
TS 37.145-2: "Active Antenna System (AAS) Base Station (BS) conformance testing; Part 2: radiated conformance testing".
