Content for TS 38.115-1 Word version: 18.5.0
3 Definitions of terms, symbols and abbreviations
4 General conducted test conditions and declarations
5 Operating bands and channel arrangement
6 Conducted characteristics
3 Definitions of terms, symbols and abbreviations p. 15
4 General conducted test conditions and declarations p. 17
4.1 Measurement uncertainties and test requirements p. 17
4.1.1 General p. 17
4.1.2 Acceptable uncertainty of Test System p. 17
4.1.3 Interpretation of measurement results p. 19
4.2 Conducted requirement reference points p. 19
4.3 Repeater classes p. 19
4.4 Regional requirements p. 20
4.5 Repeater configurations p. 20
4.5.1 General configurations p. 20
4.5.2 Transmission with multiple BS-side antenna connectors p. 20
4.5.3 Transmission with multiple UE-side antenna connectors p. 21
4.5.4 Duplexers p. 21
4.5.5 Power supply options p. 21
4.5.6 Ancillary RF amplifiers p. 21
4.5.7 Combining of repeaters p. 22
4.6 Manufacturer declarations p. 22
4.7 Test configurations p. 24
4.7.1 General p. 24
4.7.2 Test signal used to build Test Configurations p. 24
4.7.3 RTC1: Contiguous spectrum operation p. 24
4.7.3.1 RTC1 generation p. 24
4.7.3.2 RTC1 power allocation p. 25
4.7.5 RTC2: Non-contiguous spectrum operation p. 25
4.7.5.1 RTC2 generation p. 25
4.7.5.2 RTC2 power allocation p. 25
4.7.6 RTC3: Multi-band test configuration for full carrier allocation p. 25
4.7.6.1 RTC3 generation p. 25
4.7.6.2 RTC3 power allocation p. 26
4.7.7 RTC4: Multi-band test configuration with high PSD per carrier p. 26
4.7.7.1 RTC4 generation p. 26
4.7.7.2 RTC4 power allocation p. 26
4.8 Applicability of requirements p. 26
4.8.1 General p. 26
4.8.2 Applicability of test configurations for single-band operation p. 26
4.8.4 Applicability of test configurations for multi-band operation p. 27
4.9 RF channels and test models p. 28
4.9.1 RF channels p. 28
4.9.2 Test models p. 29
4.9.2.1 General p. 29
4.9.2.2 FR1 test models for repeater type 1-C for DL p. 29
4.9.2.3 FR1 test models for repeater type 1-C for UL p. 29
4.9.2.3.1 General p. 29
4.9.2.3.2 FR1 test model 1.1 (RUL-FR1-TM1.1) p. 30
4.9.2.3.3 FR1 test model 2 (RUL-FR1-TM2) p. 31
4.9.2.3.3a FR1 test model 2a (RUL-FR1-TM2a) p. 31
4.9.2.3.4 FR1 test model 3.1 (RUL-FR1-TM3.1) p. 31
4.9.2.3.5 FR1 test model 3.1a (RUL-FR1-TM3.1a) p. 31
4.9.2.4 Data content of Physical channels and Signals for RUL-FR1-TM p. 32
4.9.2.4.1 General p. 32
4.9.2.4.2 PUSCH p. 32
4.10 Requirements for contiguous and non-contiguous spectrum p. 32
4.11 Requirements for repeater capable of multi-band operation p. 33
4.12 Format and interpretation of tests p. 33
5 Operating bands and channel arrangement p. 34
6 Conducted characteristics p. 34
6.1 General p. 34
6.2 Repeater output power p. 34
6.2.1 Definition and applicability p. 34
6.2.2 Minimum requirement p. 35
6.2.3 Test purpose p. 35
6.2.4 Method of test p. 35
6.2.4.1 Initial conditions p. 35
6.2.4.2 Procedure p. 36
6.2.5 Test requirement p. 36
6.3 Frequency stability p. 36
6.3.1 Definition and applicability p. 36
6.3.2 Minimum Requirement p. 36
6.3.3 Test purpose p. 37
6.3.4 Method of test p. 37
6.3.5 Test Requirements p. 37
6.4 Out of band gain p. 37
6.4.1 Definition and applicability p. 37
6.4.2 Minimum Requirement p. 37
6.4.3 Test purpose p. 37
6.4.4 Method of test p. 37
6.4.4.1 Initial conditions p. 37
6.4.4.2 Procedure p. 37
6.4.5 Test Requirements p. 37
6.5 Unwanted emissions p. 38
6.5.1 General p. 38
6.5.2 Adjacent Channel Leakage Power Ratio (ACLR) p. 39
6.5.2.1 Definition and applicability p. 39
6.5.2.2 Minimum requirement p. 39
6.5.2.3 Test purpose p. 39
6.5.2.4 Method of test p. 39
6.5.2.4.1 Initial conditions p. 39
6.5.2.4.2 Procedure p. 39
6.5.2.5 Test requirements p. 40
6.5.3 Operating band unwanted emissions p. 44
6.5.3.1 Definition and applicability p. 44
6.5.3.2 Minimum requirement p. 45
6.5.3.3 Test purpose p. 45
6.5.3.3a Method of test p. 46
6.5.3.3a.1 Initial conditions p. 46
6.5.3.3a.2 Procedure p. 46
6.5.3.4 Test requirements p. 46
6.5.3.4.1 Minimum requirements for Wide Area repeater type 1-C (Category A) p. 46
6.5.3.4.2 Minimum requirements for Wide Area repeater type 1-C (Category B) p. 48
6.5.3.4.2.1 Category B requirements (Option 1) p. 48
6.5.3.4.2.2 Category B requirements (Option 2) p. 49
6.5.3.4.3 Minimum requirements for Medium Range repeater type 1-C (Category A and B) for DL p. 50
6.5.3.4.4 Minimum requirements for Local Area repeater type 1-C (Category A and B) p. 52
6.5.3.4.5 Minimum requirements for additional requirements p. 53
6.5.4 Transmitter spurious emissions p. 53
6.5.4.1 Definition and applicability p. 53
6.5.4.2 Minimum requirement p. 54
6.5.4.3 Test purpose p. 54
6.5.4.4 Method of test p. 54
6.5.4.4.1 Initial conditions p. 54
6.5.4.4.2 Procedure p. 54
6.5.4.5 Test requirements p. 55
6.5.5 Receiver spurious emissions p. 71
6.5.5.1 Definition and applicability p. 71
6.5.5.2 Minimum requirement p. 71
6.5.5.3 Test purpose p. 71
6.5.5.4 Method of test p. 71
6.5.5.4.1 Initial conditions p. 71
6.5.5.4.2 Procedure p. 71
6.5.5.5 Test requirements p. 72
6.6 Repeater Error Vector Magnitude p. 72
6.6.1 Downlink repeater error vector magnitude p. 72
6.6.1.1 General p. 72
6.6.1.2 Minimum requirements p. 73
6.6.1.3 Test purpose p. 73
6.6.1.4 Method of test p. 73
6.6.1.4.1 Initial conditions p. 73
6.6.1.4.2 Procedure p. 73
6.6.1.5 Test requirement p. 74
6.6.2 Uplink repeater error vector magnitude p. 74
6.6.2.1 General p. 74
6.6.2.2 Minimum requirement p. 74
6.6.2.2a Test purpose p. 75
6.6.2.3 Method of test p. 75
6.6.2.3.1 Initial conditions p. 75
6.6.2.3.2 Procedure p. 75
6.6.2.4 Test requirement p. 76
6.7 Input intermodulation p. 76
6.7.1 Definition and applicability p. 76
6.7.1.1 General p. 76
6.7.1.2 Minimum requirements p. 76
6.7.1.3 Test purpose p. 76
6.7.1.4 Method of test p. 76
6.7.1.4.1 Initial conditions p. 76
6.7.1.4.2 Procedure p. 76
6.7.1.5 Test requirements p. 77
6.8 Output intermodulation p. 79
6.8.1 Definition and applicability p. 79
6.8.1.1 General p. 79
6.8.1.2 Minimum requirements p. 79
6.8.1.3 Test purpose p. 79
6.8.1.4 Method of test p. 79
6.8.1.4.1 Initial conditions p. 79
6.8.1.4.2 Procedure p. 79
6.8.1.5 Test requirements p. 80
6.9 Adjacent Channel Rejection Ratio (ACRR) p. 81
6.9.1 Definitions and applicability p. 81
6.9.2 Co-existence with UTRA, E-UTRA and NR p. 81
6.10 Transmit ON/OFF power p. 83
6.10.1 Transmitter OFF power p. 83
6.10.1.1 Definition and applicability p. 83
6.10.1.2 Minimum requirement p. 83
6.10.1.3 Test purpose p. 83
6.10.1.4 Method of test p. 84
6.10.1.5 Test requirements p. 84
6.10.2 Transmitter transient period p. 84
6.10.2.1 Definition and applicability p. 84
6.10.2.2 Minimum requirement p. 84
6.10.2.3 Test purpose p. 84
6.10.2.4 Method of test p. 85
6.10.2.4.1 Initial conditions p. 85
6.10.2.4.2 Procedure p. 85
