Content for TS 38.115-1 Word version: 18.5.0
1 Scope p. 14
The present document specifies the Radio Frequency (RF) test methods and conformance requirements for RF repeater type 1-C ,network controlled repeater type 1-C and 1-H. These have been derived from, and are consistent with the conducted requirements for repeater type 1-C, network controlled repeater type 1-C and 1-H in NR repeater specification defined in TS 38.106.
RF repeater type 1-C, NCR type 1-C and 1-H only have conducted requirements so it requires compliance to this specification only.
RF repeater type 2-O and NCR type 2-O have only radiated requirements so it requires compliance to TS 38.115-2 only.
2 References p. 14
The following documents contain provisions which, through reference in this text, constitute provisions of the present document.
- References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific.
- For a specific reference, subsequent revisions do not apply.
- For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document.
[1]
TR 21.905: "Vocabulary for 3GPP Specifications".
[2]
TS 38.106: "NR; Repeater Radio Transmission and Reception"
[3]
TS 38.115-2: "NR; Repeater conformance testing, Part 2: Radiated conformance testing"
[4]
ITU-R Recommendation SM.329: "Unwanted emissions in the spurious domain"
[5]
TS 38.104: "NR; Base Station (BS) radio transmission and reception"
[6]
TS 36.104: "Evolved Universal Terrestrial Radio Access (E-UTRA); Base Station (BS) radio transmission and reception"
[7]
TS 38.141-1: "NR; Base Station (BS) conformance testing, Part 1: Conducted conformance testing"
[8]
TS 38.211: "NR; Physical channels and modulation"
[9]
TS 38.101-1: "NR; User Equipment (UE) radio transmission and reception; Part 1: Range 1 Standalone"
[10]
TS 38.331: "NR; Radio Resource Control (RRC) protocol specification"
[11]
ITU-R Recommendation M.1545: "Measurement uncertainty as it applies to test limits for the terrestrial component of International Mobile Telecommunications - 2000"
[12]
ITU-T Recommendation O.150: "Equipment for the measurement of digital and analogue/digital parameters"
[13]
Federal Communications Commission: "Title 47 of the Code of Federal Regulations (CFR) "
[14]
ECC/DEC/(17)06: "The harmonised use of the frequency bands 1427-1452 MHz and 1492-1518 MHz for Mobile/Fixed Communications Networks Supplemental Downlink (MFCN SDL)"
[15]
TR 25.942: "RF system scenarios"
[16]
IEC 60 721-3-3: "Classification of environmental conditions - Part 3-3: Classification of groups of environmental parameters and their severities - Stationary use at weather protected locations"
[17]
IEC 60 721-3-4: "Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Clause 4: Stationary use at non-weather protected locations"
[18]
IEC 60 721: "Classification of environmental conditions"
[19]
IEC 60 068-2-1 (2007): "Environmental testing - Part 2: Tests. Tests A: Cold"
[20]
IEC 60 068-2-2: (2007): "Environmental testing - Part 2: Tests. Tests B: Dry heat"
[21]
IEC 60 068-2-6: (2007): "Environmental testing - Part 2: Tests - Test Fc: Vibration (sinusoidal)"
[22]
TS 38.101-1: "NR; User Equipment (UE) radio transmission and reception; Part 1: Range 1 Standalone"
[23]
TS 38.214: "NR; Physical layer procedures for data"
[24]
TR 38.901: "Study on channel model for frequencies from 0.5 to 100 GHz"
