Content for TS 38.108 Word version: 18.3.0
9 Radiated transmitter characteristics
10 Radiated receiver characteristics
11 Radiated performance requirements
9 Radiated transmitter characteristics p. 67
9.1 General p. 67
9.2 Radiated transmit power p. 67
9.2.1 General p. 67
9.2.2 Minimum requirement for SAN type 1-H and SAN type 1-O p. 68
9.2.3 Minimum requirement for SAN type 2-O |R18| p. 68
9.3 OTA Satellite Access Node output power p. 68
9.3.1 General p. 68
9.3.2 Minimum requirement for SAN type 1-O p. 68
9.3.3 Minimum requirement for SAN type 2-O |R18| p. 68
9.4 OTA output power dynamics p. 68
9.4.1 General p. 68
9.4.2 OTA RE power control dynamic range p. 69
9.4.3 OTA total power dynamic range p. 69
9.5 OTA transmit ON/OFF power p. 69
9.6 OTA transmitted signal quality p. 70
9.6.1 OTA frequency error p. 70
9.6.1.1 General p. 70
9.6.1.2 Minimum requirement for SAN type 1-O p. 70
9.6.1.3 Minimum requirement for SAN type 2-O |R18| p. 70
9.6.2 OTA modulation quality p. 70
9.6.2.1 General p. 70
9.6.2.2 Minimum requirement for SAN type 1-O p. 70
9.6.2.3 Minimum requirement for SAN type 2-O |R18| p. 70
9.6.3 OTA time alignment error p. 71
9.7 OTA unwanted emissions p. 71
9.7.1 General p. 71
9.7.2 OTA occupied bandwidth p. 71
9.7.3 OTA Adjacent Channel Leakage Power Ratio (ACLR) p. 71
9.7.3.1 General p. 71
9.7.3.2 Minimum requirement for SAN type 1-O p. 71
9.7.3.3 Minimum requirement for SAN type 2-O |R18| p. 72
9.7.4 OTA out-of-band emissions p. 72
9.7.4.1 General p. 72
9.7.4.2 Minimum requirement for SAN type 1-O p. 72
9.7.4.3 Minimum requirement for SAN type 2-O |R18| p. 72
9.7.5 OTA transmitter spurious emissions p. 73
9.7.5.1 General p. 73
9.7.5.2 Minimum requirement for SAN type 1-O p. 73
9.7.5.2.1 General p. 73
9.7.5.2.2 General OTA transmitter spurious emissions requirements p. 73
9.7.5.2.3 Protection of the SAN receiver p. 73
9.7.5.2.4 Additional spurious emissions requirements p. 74
9.7.5.3 Minimum requirement for SAN type 2-O |R18| p. 74
9.8 OTA transmitter intermodulation p. 74
10 Radiated receiver characteristics p. 75
10.1 General p. 75
10.2 OTA sensitivity p. 75
10.3 OTA reference sensitivity level p. 76
10.3.1 General p. 76
10.3.2 Minimum requirement for SAN type 1-O p. 76
10.3.3 Minimum requirement for SAN type 2-O |R18| p. 77
10.4 OTA dynamic range p. 78
10.5 OTA in-band selectivity and blocking p. 79
10.5.1 OTA adjacent channel selectivity p. 79
10.5.1.1 General p. 79
10.5.1.2 Minimum requirement for SAN type 1-O p. 79
10.5.1.3 Minimum requirement for SAN type 2-O |R18| p. 80
10.5.2 OTA in-band blocking p. 81
10.6 OTA out-of-band blocking p. 81
10.6.1 General p. 81
10.6.2 Minimum requirement for SAN type 1-O p. 81
10.6.3 Minimum requirement for SAN type 2-O |R18| p. 82
10.7 OTA receiver spurious emissions p. 82
10.8 OTA receiver intermodulation p. 82
10.9 OTA in-channel selectivity p. 83
11 Radiated performance requirements p. 85
11.1 General p. 85
11.2 Performance requirements for PUSCH p. 86
11.2.1 Requirements for SAN type 1-O p. 86
11.2.1.1 Requirements for PUSCH with transform precoding disabled |R18| p. 86
11.2.1.2 Requirements for PUSCH with transform precoding enabled |R18| p. 86
11.2.1.3 Requirements for UL timing adjustment |R18| p. 86
11.2.1.4 Requirements for PUSCH repetition Type A |R18| p. 86
11.2.2 Requirements for SAN type 2-O p. 86
11.2.2.1 Requirements for PUSCH with transform precoding disabled |R18| p. 86
11.2.2.1.1 General p. 86
11.2.2.1.2 Minimum requirements p. 86
11.2.2.2 Requirements for PUSCH with transform precoding enabled |R18| p. 87
11.2.2.2.1 General p. 87
11.2.2.2.2 Minimum requirements p. 87
11.2.2.3 Requirements for PUSCH repetition Type A |R18| p. 88
11.2.2.3.1 General p. 88
11.2.2.3.2 Minimum requirements p. 88
11.3 Performance requirements for PUCCH p. 89
11.3.1 Requirements for SAN type 1-O p. 89
11.3.1.1 DTX to ACK probability p. 89
11.3.1.2 Performance requirements for PUCCH format 0 p. 89
11.3.1.3 Performance requirements for PUCCH format 1 p. 89
11.3.1.4 Performance requirements for PUCCH format 2 p. 89
11.3.1.5 Performance requirements for PUCCH format 3 p. 89
11.3.1.6 Performance requirements for PUCCH format 4 p. 89
11.3.1.7 Performance requirements for multi-slot PUCCH p. 89
11.3.2 Requirements for SAN type 2-O |R18| p. 89
11.3.2.1 General p. 89
11.3.2.2 Performance requirements for PUCCH format 0 p. 90
11.3.2.2.1 General p. 90
11.3.2.2.2 Minimum requirements p. 90
11.3.2.3 Performance requirements for PUCCH format 1. p. 90
11.3.2.4 Performance requirements for PUCCH format 2 p. 92
11.3.2.4.1 ACK missed detection requirements p. 92
11.3.2.4.2 UCI BLER performance requirements p. 92
11.3.2.4.2.1 Genera p. 92
11.3.2.4.2.2 Minimum requirements p. 93
11.3.2.5 Performance requirements for PUCCH format 3 p. 93
11.3.2.5.1 General p. 93
11.3.2.5.2 Minimum requirements p. 93
11.3.2.6 Performance requirements for PUCCH format 4 p. 94
11.3.2.6.1 General p. 94
11.3.2.6.2 Minimum requirements p. 94
11.4 Performance requirements for PRACH p. 95
