Content for TS 38.108 Word version: 18.3.0
4 General
5 Operating bands and channel arrangement
6 Conducted transmitter characteristics
7 Conducted receiver characteristics
8 Conducted performance requirements
...
...
4 General p. 23
4.1 Relationship with other core specifications p. 23
4.2 Relationship between minimum requirements and test requirements p. 23
4.3 Requirement reference points p. 23
4.4 Satellite Access Node classes p. 25
4.5 Regional requirements p. 25
4.6 Applicability of minimum requirements p. 26
5 Operating bands and channel arrangement p. 27
5.1 General p. 27
5.2 Operating bands p. 28
5.3 Satellite Access Node channel bandwidth p. 28
5.3.1 General p. 28
5.3.2 Transmission bandwidth configuration p. 29
5.3.3 Minimum guardband and transmission bandwidth configuration p. 29
5.3.4 RB alignment p. 30
5.3.5 SAN channel bandwidth per operating band p. 31
5.4 Channel arrangement p. 31
6 Conducted transmitter characteristics p. 35
6.1 General p. 35
6.2 Satellite Access Node output power p. 35
6.3 Output power dynamics p. 35
6.3.1 General p. 35
6.3.2 RE power control dynamic range p. 36
6.3.3 Total power dynamic range p. 36
6.4 Transmit ON/OFF power p. 36
6.5 Transmitted signal quality p. 37
6.5.1 Frequency error p. 37
6.5.2 Modulation quality p. 37
6.5.2.1 General p. 37
6.5.2.2 Minimum Requirement for SAN type 1-H p. 37
6.5.2.3 EVM frame structure for measurement p. 37
6.5.3 Time alignment error p. 37
6.6 Unwanted emissions p. 38
6.6.1 General p. 38
6.6.2 Occupied bandwidth p. 38
6.6.3 Adjacent Channel Leakage Power Ratio p. 38
6.6.4 Out-of-band emissions p. 39
6.6.4.1 General p. 39
6.6.4.2 Basic limits p. 39
6.6.4.3 Minimum requirements for SAN type 1-H p. 40
6.6.5 Transmitter spurious emissions p. 40
6.6.5.1 General p. 40
6.6.5.2 Basic limits p. 41
6.6.5.2.1 General transmitter spurious emissions requirements p. 41
6.6.5.2.2 Protection of the own Satellite Access Node receiver p. 41
6.6.5.2.3 Additional spurious emissions requirements p. 41
6.6.5.2.4 Co-location with other Satellite Access Nodes p. 41
6.6.5.3 Minimum requirements for SAN type 1-H p. 41
6.7 Transmitter intermodulation p. 41
7 Conducted receiver characteristics p. 42
7.1 General p. 42
7.2 Reference sensitivity level p. 42
7.3 Dynamic range p. 43
7.4 In-band selectivity and blocking p. 44
7.5 Out-of-band blocking p. 45
7.6 Receiver spurious emissions p. 45
7.7 Receiver intermodulation p. 45
7.8 In-channel selectivity p. 46
8 Conducted performance requirements p. 47
8.1 General p. 47
8.2 Performance requirements for PUSCH p. 48
8.2.1 Requirements for PUSCH with transform precoding disabled p. 48
8.2.1.1 General p. 48
8.2.1.2 Minimum requirements p. 48
8.2.2 Requirements for PUSCH with transform precoding enabled p. 49
8.2.2.1 General p. 49
8.2.2.2 Minimum requirements p. 50
8.2.3 Requirements for UL timing adjustment p. 52
8.2.4 Requirements for PUSCH repetition Type A p. 53
8.2.4.1 General p. 53
8.2.4.2 Minimum requirements p. 54
8.2.5 Requirements for PUSCH with DM-RS bundling |R18| p. 55
8.2.5.1 General p. 55
8.2.5.2 Minimum requirements p. 56
8.3 Performance requirements for PUCCH p. 57
8.3.1 DTX to ACK probability p. 57
8.3.1.1 General p. 57
8.3.1.2 Minimum requirement p. 57
8.3.2 Performance requirements for PUCCH format 0 p. 57
8.3.2.1 General p. 57
8.3.2.2 Minimum requirements p. 58
8.3.3 Performance requirements for PUCCH format 1 p. 58
8.3.3.1 NACK to ACK requirements p. 58
8.3.3.1.1 General p. 58
8.3.3.1.2 Minimum requirements p. 59
8.3.3.2 ACK missed detection requirements p. 59
8.3.3.2.1 General p. 59
8.3.3.2.2 Minimum requirements p. 60
8.3.4 Performance requirements for PUCCH format 2 p. 60
8.3.4.1 ACK missed detection requirements p. 60
8.3.4.1.1 General p. 60
8.3.4.1.2 Minimum requirements p. 60
8.3.4.2 UCI BLER performance requirements p. 61
8.3.4.2.1 General p. 61
8.3.4.2.2 Minimum requirements p. 61
8.3.5 Performance requirements for PUCCH format 3 p. 62
8.3.5.1 General p. 62
8.3.5.2 Minimum requirements p. 62
8.3.6 Performance requirements for PUCCH format 4 p. 63
8.3.6.1 General p. 63
8.3.6.2 Minimum requirement p. 63
8.3.7 Performance requirements for multi-slot PUCCH p. 64
8.4 Performance requirements for PRACH p. 66
8.4.1 PRACH False alarm probability p. 66
8.4.1.1 General p. 66
8.4.1.2 Minimum requirement p. 66
8.4.2 PRACH detection requirements p. 66
8.4.2.1 General p. 66
8.4.2.2 Minimum requirements p. 66
