Content for TS 37.145-2 Word version: 18.6.0
1 Scope p. 24
The present document specifies radiated test methods and conformance requirements for 2 types of AAS BS; hybrid requirements set which specify requirements for a hybrid AAS BS with both a conducted and a radiated interface and OTA requirements set which specify requirements for an OTA AAS BS which has a radiated interface only.
The hybrid AAS BS requirements are specified for E-UTRA AAS Base Station (BS), the FDD mode of UTRA AAS Base Station (BS), the 1,28 Mcps TDD mode of UTRA AAS Base Station (BS) in single RAT and any MSR AAS Base Station (BS) implementation of these RATs including NR operation.
The OTA AAS BS requirements are specified for E-UTRA AAS Base Station (BS), the FDD mode of UTRA AAS Base Station (BS), in single RAT and any MSR AAS Base Station (BS) implementation of these RATs and/or NR.
The requirements have been derived from, and are consistent with non-AAS BS specifications in TS 25.104, TS 25.105, TS 36.104 or TS 37.104 and where applicable with the NR specification TS 38.104. The technical specification TS 37.145 is in 2 parts, part TS 37.145-1 covers conducted requirements and part TS 37.145-2 (the present document) covers radiated requirements.
The present document does not establish radiated test methods and conformance requirements for Band 46 operation as it is not supported by AAS BS. Conducted Band 46 test requirements are still applicable for AAS BS for protection of and against Band 46 operation, as specified in TS 37.145-1.
The present document does not establish minimum RF characteristics or minimum performance requirements for Narrow-Band Internet of Things (NB-IoT) in band, NB-IoT guard band, or standalone NB-IoT operation, for AAS BS in single RAT E-UTRA operation or in MSR operation using E-UTRA.
2 References p. 24
The following documents contain provisions which, through reference in this text, constitute provisions of the present document.
- References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific.
- For a specific reference, subsequent revisions do not apply.
- For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document.
[1]
TR 21.905: "Vocabulary for 3GPP Specifications".
[2]
TS 25.104: "Base Station (BS) radio transmission and reception (FDD)".
[3]
TS 25.105: "Base Station (BS) radio transmission and reception (TDD)".
[4]
TS 36.104: "Evolved Universal Terrestrial Radio Access (E-UTRA); Base Station (BS) radio transmission and reception".
[5]
TS 37.104: "NR, E-UTRA, UTRA and GSM/EDGE; Multi-Standard Radio (MSR) Base Station (BS) radio transmission and reception".
[6]
TS 37.105: "Active Antenna System (AAS) Base Station (BS) transmission and reception".
[7] Void
[8]
Recommendation ITU-R M.1545: "Measurement uncertainty as it applies to test limits for the terrestrial component of International Mobile Telecommunications-2000".
[9]
TS 37.145-1: "Active Antenna System (AAS) Base Station (BS) conformance testing; Part 1: Conducted conformance testing".
[10]
TS 25.141: "Base Station (BS) conformance testing (FDD)".
[11]
TS 25.142: "Base Station (BS) conformance testing (TDD)".
[12]
TS 36.141: "Evolved Universal Terrestrial Radio Access (E-UTRA); Base Station (BS) conformance testing".
[13]
TS 37.141: "NR, E-UTRA, UTRA and GSM/EDGE; Multi-Standard Radio (MSR) Base Station (BS) conformance testing".
[14]
Recommendation ITU-R M.328: "Spectra and bandwidth of emissions".
[15]
TS 25.331: (V14.3.0): "Radio Resource Control (RRC); Protocol specification (Release 14)".
[16]
Recommendation ITU-R SM.329-10: "Unwanted emissions in the spurious domain".
[17]
FCC publication number 662911: "Emissions Testing of Transmitters with Multiple Outputs in the Same Band"
[18]
"Title 47 of the Code of Federal Regulations (CFR)", Federal Communications Commission
[19]
CEPT ECC Decision (13)03, "The harmonised use of the frequency band 1452-1492 MHz for Mobile/Fixed Communications Networks Supplemental Downlink (MFCN SDL)".
[20]
IEC 60721: "Classification of environmental conditions"
[21]
IEC 60721-3-3: "Classification of environmental conditions - Part 3-3: Classification of groups of environmental parameters and their severities - Stationary use at weather protected locations"
[22]
IEC 60721-3-4: "Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 4: Stationary use at non-weather protected locations"
[23]
ETSI EN 300 019-1-3: "Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 1-3: Classification of environmental conditions; Stationary use at weatherprotected locations"
[24]
ETSI EN 300 019-1-4: "Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 1-4: Classification of environmental conditions; Stationary use at non-weatherprotected locations"
[25]
IEC 60068-2-1 (2007): "Environmental testing - Part 2: Tests. Tests A: Cold"
[26]
IEC 60068-2-2 (2007): "Environmental testing - Part 2: Tests. Tests B: Dry heat"
[27]
IEC 60068-2-6 (2007): "Environmental testing - Part 2: Tests - Test Fc: Vibration (sinusoidal)"
[28]
TS 36.211: "Evolved Universal Terrestrial Radio Access (E-UTRA); Physical channels and modulation"
[29] Void
[30]
Recommendation ITU-T O.153: "Basic parameters for the measurement of error performance at bit rates below the primary rate"
[31]
TR 25.942: "Radio Frequency (RF) system scenarios".
[32]
TS 45.004: "Digital cellular telecommunications system (Phase 2+); Modulation".
[33]
TS 38.104: "NR Base Station (BS) radio transmission and reception".
[34]
TS 38.141-2: "Base Station (BS) conformance testing Part 2: Radiated conformance testing".
[35]
TS 38.141-1: "NR;Base Station (BS) conformance testing; Part 1: Conducted conformance testing".
[36]
TS 38.211: "NR; Physical channels and modulation".
[37]
TS 38.104: (V15.6.0): "NR Base Station (BS) radio transmission and reception (Release 15)".
[38]
TR 37.941: "Radio Frequency (RF) conformance testing background for radiated Base Station (BS) requirements".
