Content for TS 37.141 Word version: 17.1.0
2 References
3 Definitions, symbols and abbreviations
4 General test conditions and declarations
4.1 Measurement uncertainties and test requirements
4.2 Base Station classes
4.3 Regional requirements
4.4 Operating bands and band categories
4.5 Channel arrangement
4.6 Manufacturer's declarations of regional and optional requirements
4.7 Capability set definition and manufacturer's declarations of supported RF configurations
4.8 MSR test configurations
4.9 RF channels and test models
4.10 BS configurations
4.11 Format and interpretation of tests
4.12 Requirements for BS capable of multi-band operation
4.13 Tests for BS capable of multi-band operation with three or more bands
5 Applicability of requirements and test configurations
...
...
2 References
3 Definitions, symbols and abbreviations Word‑p. 14
4 General test conditions and declarations Word‑p. 21
4.1 Measurement uncertainties and test requirements
4.1.1 General
4.1.2 Acceptable uncertainty of Test System Word‑p. 22
4.1.2.1 Measurement of transmitter Word‑p. 23
4.1.2.2 Measurement of receiver Word‑p. 24
4.1.3 Interpretation of measurement results Word‑p. 26
4.2 Base Station classes Word‑p. 27
4.3 Regional requirements
4.4 Operating bands and band categories Word‑p. 29
4.4.1 Band category 1 aspects (BC1) Word‑p. 33
4.4.2 Band category 2 aspects (BC2) Word‑p. 34
4.4.3 Band category 3 aspects (BC3)
4.5 Channel arrangement
4.5.1 Channel spacing
4.5.1A CA Channel spacing |R10| Word‑p. 35
4.5.2 Channel raster Word‑p. 36
4.5.3 Carrier frequencies and numbering
4.6 Manufacturer's declarations of regional and optional requirements
4.6.1 Operating band and frequency range
4.6.2 Spurious emissions category Word‑p. 37
4.6.3 Additional operating band unwanted emissions
4.6.4 Co-existence with other systems
4.6.5 Co-location with other Base Stations Word‑p. 38
4.6.6 NB-IoT sub-carrier spacing |R13|
4.6.7 NB-IoT power dynamic range |R13|
4.7 Capability set definition and manufacturer's declarations of supported RF configurations
4.7.1 Definition of Capability Sets (CS)
4.7.2 Manufacturer's declarations of supported RF configurations Word‑p. 43
4.8 MSR test configurations Word‑p. 47
4.8.1 TC1: UTRA multicarrier operation
4.8.1a NTC1: UTRA multicarrier non-contiguous operation |R10|
4.8.2 TC2: E-UTRA multicarrier operation
4.8.2a NTC2: E-UTRA multicarrier non-contiguous operation |R10|
4.8.3 TC3: UTRA and E-UTRA multi RAT operation
4.8.3a NTC3: UTRA and E-UTRA multi RAT non-contiguous operation |R10|
4.8.4 TC4: BC2 transmitter operation
4.8.4.1 TC4a generation
4.8.4.2 TC4b generation
4.8.4.3 TC4c generation Word‑p. 52
4.8.4.4 TC4d generation
4.8.4.5 TC4e generation
4.8.4.6 TC4 power allocation Word‑p. 53
4.8.4a NTC4: Non-contiguous multi RAT operations with GSM for the transmitter |R10|
4.8.4a.1 NTC4a generation
4.8.4a.2 NTC4b generation Word‑p. 54
4.8.4a.3 NTC4c generation
4.8.4a.4 NTC4 power allocation Word‑p. 55
4.8.5 TC5: BC2 receiver operation
4.8.5.1 TC5a generation
4.8.5.2 TC5b generation Word‑p. 56
4.8.5a NTC5: Non-contiguous multi RAT operations with GSM for the receiver |R10|
4.8.6 TC6: Single carrier for receiver tests Word‑p. 57
4.8.7 Generation of MB-MSR test configurations |R11|
4.8.7.1 TC7a: MB-MSR test configuration for full carrier allocation
4.8.7.2 TC7b: MB-MSR test configuration with high PSD per carrier
4.8.7.3 TC7c: MB-MSR test configuration with GSM/EDGE single RAT operation in one band
4.8.8 TC8: NB-IoT standalone multi-carrier operation |R13|
4.8.9 TC9: GSM and NB-IoT standalone multi-carrier operation |R13| Word‑p. 61
4.8.10 TC10: UTRA and NB-IoT standalone multi-carrier operation |R13|
4.8.11 TC11: E-UTRA and NB-IoT standalone multi-carrier operation |R13| Word‑p. 62
4.8.12 TC12: GSM and UTRA and NB-IoT standalone multi-carrier operation |R13|
4.8.13 TC13: GSM and E-UTRA and NB-IoT standalone multi-carrier operation |R13|
4.8.14 TC14: UTRA and E-UTRA and NB-IoT standalone multi-carrier operation |R13|
4.8.15 TC15: GSM and E-UTRA with NB-IoT in-band multi-carrier operation |R13|
4.8.16 TC16: UTRA and E-UTRA with NB-IoT in-band multi-carrier operation |R13|
4.8.17 TC17: E-UTRA and E-UTRA with NB-IoT in-band multi-carrier operation |R13|
4.8.18 TC18: GSM and E-UTRA with NB-IoT guard-band multi-carrier operation |R13|
4.8.19 TC19: UTRA and E-UTRA with NB-IoT guard-band multi-carrier operation |R13|
4.8.20 TC20: E-UTRA and E-UTRA with NB-IoT guard-band multi-carrier operation |R13|
4.8.21 TC21: Contiguous operation in CS16, 18, 19 |R15|
4.8.21.0 General |R16|
4.8.21.1 TC21 generation
4.8.21.1A TC21a generation |R16| Word‑p. 68
4.8.21.1B TC21b generation |R16| Word‑p. 69
4.8.21.2 TC21 power allocation
4.8.22 NTC21: Non-contiguous operation in CS16, 18, 19 |R15| Word‑p. 70
4.8.22.0 General |R16|
4.8.22.1 NTC21 generation
4.8.22.1A NTC21a generation |R16|
4.8.22.1B NTC21b generation |R16| Word‑p. 71
4.8.22.2 NTC21 power allocation Word‑p. 72
4.8.23 TC22: Contiguous operation in CS17 |R15|
4.9 RF channels and test models
4.9.1 RF channels
4.9.2 Test models Word‑p. 74
4.10 BS configurations Word‑p. 75
4.10.1 Transmit configurations
4.10.2 Receive configurations
4.10.3 Duplexers
4.10.4 Power supply options
4.10.5 Ancillary RF amplifiers
4.10.6 BS with integrated Iuant BS modem Word‑p. 77
4.10.7 BS using antenna arrays
4.11 Format and interpretation of tests
4.12 Requirements for BS capable of multi-band operation |R11| Word‑p. 79
4.13 Tests for BS capable of multi-band operation with three or more bands |R14| Word‑p. 80
5 Applicability of requirements and test configurations
5.1 Multi-RAT capable Base Stations Word‑p. 82
5.2 Single-RAT Multi-carrier capable Base Stations Word‑p. 110
5.3 Multi-band capable Base Stations |R11| Word‑p. 122
