The following documents contain provisions which, through reference in this text, constitute provisions of the present document.
[1]
TR 21.905: "Vocabulary for 3GPP Specifications".
[2]
TS 37.104: "E-UTRA, UTRA and GSM/EDGE; Multi-Standard Radio (MSR) Base Station (BS) radio transmission and reception".
[3]
TS 25.104: "Base Station (BS) radio transmission and reception (FDD) ".
[4]
TS 25.105: "Base Station (BS) radio transmission and reception (TDD) ".
[5]
TS 36.104: "Evolved Universal Terrestrial Radio Access (E-UTRA); Base Station (BS) radio transmission and reception".
[6]
TS 45.005: "Radio transmission and reception".
[7]
ITU-R Recommendation M.1545, "Measurement uncertainty as it applies to test limits for the terrestrial component of International Mobile Telecommunications-2000".
[8]
"Title 47 of the Code of Federal Regulations (CFR)", Federal Communications Commission.
[9]
TS 36.141: "Evolved Universal Terrestrial Radio Access (E-UTRA); Base Station (BS) conformance testing".
[10]
TS 25.141: "Base Station (BS) conformance testing (FDD) ".
[11]
TS 51.021: "Base Station System (BSS) equipment specification; Radio aspects".
[12]
TS 25.142: "Base Station (BS) conformance testing (TDD) ".
[13]
Recommendation ITU-R SM.329-10, "Unwanted emissions in the spurious domain".
[14]
TR 25.942: "Radio Frequency (RF) system scenarios".
[15]
ITU-R recommendation SM.328: "Spectra and bandwidth of emissions".
[16]
IEC 60721: "Classification of environmental conditions".
[17]
IEC 60721-3-3: "Classification of environmental conditions - Part 3-3: Classification of groups of environmental parameters and their severities - Stationary use at weather protected locations".
[18]
IEC 60721-3-4: "Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 4: Stationary use at non-weather protected locations".
[19]
ETSI EN 300 019-1-3, European Standard (Telecommunications series), "Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 1-3: Classification of environmental conditions; Stationary use at weather protected locations"
[20]
ETSI EN 300 019-1-4, European Standard (Telecommunications series), "Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 1-4: Classification of environmental conditions; Stationary use at non-weather protected locations".
[21]
IEC 60068-2-1 (2007): "Environmental testing - Part 2: Tests. Tests A: Cold".
[22]
IEC 60068-2-2 (2007): "Environmental testing - Part 2: Tests. Tests B: Dry heat".
[23]
IEC 60068-2-6 (2007): "Environmental testing - Part 2: Tests - Test Fc: Vibration (sinusoidal)".
[24]
CEPT ECC Decision (13)03, "The harmonised use of the frequency band 1452-1492 MHz for Mobile/Fixed Communications Networks Supplemental Downlink (MFCN SDL)".
[25]
CEPT ECC Decision (17)06, "The harmonised use of the frequency bands 1427-1452 MHz and 1492-1518 MHz for Mobile/Fixed Communications Networks Supplemental Downlink (MFCN SDL)".
[26]
TS 38.141-1: "NR; Base Station (BS) conformance testing Part 1: Conducted conformance testing".
[27]
TS 38.104: "NR; Base Station (BS) radio transmission and reception".
[28]
TS 36.101: "Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipment (UE) radio transmission and reception".
[29]
TS 38.101-1: "NR; User Equipment (UE) radio transmission and reception; Part 1: Range 1 Standalone"