Content for TR 36.788 Word version: 15.0.0
2 References
3 Definitions, symbols and abbreviations
4 Background
5 V2X scenarios in Rel-15
6 Co-existence study
7 Transmit characteristics
8 Receiver characteristics
$ Change History
2 References p. 6
3 Definitions, symbols and abbreviations p. 6
4 Background p. 7
4.1 Justification p. 7
4.2 Objective p. 7
5 V2X scenarios in Rel-15 p. 8
6 Co-existence study p. 11
7 Transmit characteristics p. 11
7.1 64QAM over PC5 p. 11
7.1.1 MPR for single carrier for power class 3 p. 11
7.1.2 MPR for single carrier for power class 2 p. 12
7.1.3 MPR for 10MHz+10MHz for power class 3 p. 12
7.1.4 A-MPR for 64QAM p. 13
7.2 Intra-band scenario p. 13
7.2.1 Transmit power p. 13
7.2.1.1 Maximum output power p. 13
7.2.1.2 UE maximum output power for modulation / channel bandwidth p. 13
7.2.2 Output RF spectrum emissions p. 13
7.2.3 Transmit intermodulation p. 14
7.3 Inter-band scenario p. 14
7.4 Diversity scenario p. 14
7.4.1 Transmit power p. 14
7.4.2 Output power dynamics p. 15
7.4.2.1 Minimum output power p. 15
7.4.2.2 Transmit OFF power p. 15
7.4.2.3 ON/OFF time mask p. 16
7.4.2.4 Power control p. 16
7.4.3 Transmit signal quality p. 16
7.4.4 Occupied bandwidth p. 16
7.4.5 Out of band emission p. 16
7.4.6 Spurious emission p. 17
7.4.7 Transmit intermodulation p. 17
7.4.8 Time alignment error p. 17
8 Receiver characteristics p. 17
8.1 64QAM over PC5 p. 17
8.2 Intra-band contiguous scenario p. 18
8.2.1 REFSENS p. 18
8.2.2 Maximum input level p. 18
8.2.3 Adjacent Channel Selectivity (ACS) p. 18
8.2.4 Blocking characteristics p. 19
8.2.4.1 In-band blocking p. 19
8.2.4.2 Out-of-band blocking p. 20
8.2.5 Spurious response p. 20
8.2.6 Intermodulation characteristics p. 21
8.2.7 RX spurious emissions p. 21
8.2.8 Receiver image p. 21
8.3 Inter-band scenario p. 21
$ Change History p. 23
