Content for TS 29.389 Word version: 18.0.0
1 Scope
2 References
3 Definitions and abbreviations
3.1 Definitions
3.3 Abbreviations
4 General Description
...
...
1 Scope p. 6
The present document describes the Diameter-based interfaces between the V2X Control Function in the HPLMN and the V2X Control Function in the VPLMN (V6 interface).
This specification defines the Diameter application for V6 reference points between the V2X Control Functions. The interactions between the V2X Control Functions are specified.
The stage 2 description for V2X service features in EPS is specified in TS 23.285.
2 References p. 6
The following documents contain provisions which, through reference in this text, constitute provisions of the present document.
- References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific.
- For a specific reference, subsequent revisions do not apply.
- For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document.
[1]
TR 21.905: "Vocabulary for 3GPP Specifications".
[2]
TS 23.285: "Architecture enhancements for V2X services; Stage 2".
[3]
RFC 6733: "Diameter Base Protocol".
[[4]
TS 33.210: "3G Security; Network Domain Security; IP Network Layer Security".
[5]
RFC 4960: "Stream Control Transmission Protocol".
[6]
TS 29.229: "Cx and Dx interfaces based on the Diameter protocol".
[7]
RFC 5234: "Augmented BNF for Syntax Specifications: ABNF".
[8]
TS 23.003: "Numbering, addressing and identification".
[9]
TS 29.228: "IP multimedia (IM) Subsystem Cx and Dx Interfaces; Signalling flows and Message Elements".
[10]
TS 29.272: "Evolved Packet System; MME and SGSN Related Interfaces Based on Diameter Protocol".
[11]
TS 29.329: "Sh Interface based on the Diameter protocol".
[12]
RFC 7683: "Diameter Overload Indication Conveyance".
[13]
TS 29.336: "Home Subscriber Server (HSS) diameter interfaces for interworking with packet data networks and applications".
[14]
TS 32.299: "Telecommunication management; Charging management; Diameter charging applications".
[15]
RFC 7944: "Diameter Routing Message Priority".
[16]
TS 29.388: "V2X Control Function to V2X Control Function to Home Subscriber Server (HSS) aspects (V4)".
[17]
TS 29.345: "Inter-Proximity-services (ProSe) Function signalling aspects".
[18]
RFC 8583: "Diameter Load Information Conveyance".
3 Definitions and abbreviations p. 7
3.1 Definitions p. 7
For the purposes of the present document, the terms and definitions given in TR 21.905 and the following apply. A term defined in the present document takes precedence over the definition of the same term, if any, in TR 21.905.
3.3 Abbreviations p. 7
4 General Description p. 7
4.1 Introduction p. 7
The V6 reference point is defined between a V2X Control Function in the HPLMN and a V2X Control Function in the VPLMN.
The definition of the V6 reference points and related functionalities are given in TS 23.285.
As defined in TS 23.285, the V6 reference point is used for:
- HPLMN control of service authorization for V2X.
