Content for TS 29.388 Word version: 18.0.0
1 Scope
2 References
3 Definitions and abbreviations
3.1 Definitions
3.2 Abbreviations
4 General Description
4.1 Introduction
...
...
1 Scope p. 6
The present document describes the Diameter-based V4 interface between the V2X Control Function and the Home Subscriber Server (HSS) defined for V2X services.
This specification defines the Diameter application for V4 reference point between the V2X Control Function and the HSS. The interactions between the V2X Control Function and the HSS are specified.
The stage 2 description for V2X service features in EPS is specified in TS 23.285.
2 References p. 6
The following documents contain provisions which, through reference in this text, constitute provisions of the present document.
- References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific.
- For a specific reference, subsequent revisions do not apply.
- For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document.
[1]
TR 21.905: "Vocabulary for 3GPP Specifications".
[2]
TS 23.285: "Architecture enhancements for V2X services; Stage 2".
[3]
RFC 6733: "Diameter Base Protocol".
[4]
TS 33.210: "3G Security; Network Domain Security; IP Network Layer Security".
[5]
RFC 4960: "Stream Control Transmission Protocol".
[6]
TS 29.229: "Cx and Dx interfaces based on the Diameter protocol".
[7]
RFC 5234: "Augmented BNF for Syntax Specifications: ABNF".
[8]
TS 23.003: "Numbering, addressing and identification".
[9]
TS 29.228: "IP multimedia (IM) Subsystem Cx and Dx Interfaces; Signalling flows and Message Elements".
[10]
TS 29.272: "Evolved Packet System; MME and SGSN Related Interfaces Based on Diameter Protocol".
[11]
TS 29.329: "Sh Interface based on the Diameter protocol".
[12]
RFC 7683: "Diameter Overload Indication Conveyance".
[13]
RFC 7944: "Diameter Routing Message Priority".
[14]
TS 23.007: "Restoration procedures".
[15]
TS 29.344: "Proximity-services (ProSe) Function to Home Subscriber Server (HSS) aspects".
[16]
RFC 8583: "Diameter Load Information Conveyance".
3 Definitions and abbreviations p. 7
3.1 Definitions p. 7
For the purposes of the present document, the terms and definitions given in TR 21.905 and the following apply. A term defined in the present document takes precedence over the definition of the same term, if any, in TR 21.905.
3.2 Abbreviations p. 7
4 General Description p. 7
4.1 Introduction p. 7
The V4 reference point between the V2X Control Function and the HSS is defined in the TS 23.285.
This document describes the V4 interface related procedures, message parameters and protocol specifications.
The V4 interface allows the V2X Control Function to retrieve V2X related subscription data in order to authorise access from the UE for V2X services.
