Content for TS 28.201 Word version: 18.1.0

6.1 Data description for network slice performance and analytics charging 6.1.1 Message contents 6.1.1.1 General 6.1.1.2 Charging Data Request message 6.1.1.3 Charging data response message 6.1.2 Ga message contents 6.1.3 CDR description on the Bns interface 6.1.3.1 General 6.1.3.2 Network slice performance and analytics CHF CDR data 6.2 Network slice performance and analytics charging specific parameters 6.2.1 Definition of network slice performance and analytics charging information 6.2.1.1 General 6.2.1.2 Definition of Performance and Analytics Charging Information 6.2.1.3 Definition of NSPA Container Information 6.2.2 Formal network slice performance and analytics charging parameter description 6.2.2.1 Network slice performance and analytics CHF CDR parameters 6.2.2.2 Network slice performance and analytics resources attributes 6.2.3 Detailed message format for converged charging 6.3 Bindings for network slice performance and analytics converged charging

6 Definition of charging information p. 17

6.1 Data description for network slice performance and analytics charging p. 17

6.1.1 Message contents p. 17

6.1.1.1 General p. 17

The Charging Data Request and Charging Data Response are specified in clause 5.1.2.2.1 of TS 32.290.

Table 6.1.1.1-1 describes the use of these messages for network slice performance and analytics charging.

Table 6.1.1.1-1: network slice performance and analytics charging messages reference table

Message	Source	Destination
Charging Data Request	CEF	CHF
Charging Data Response	CHF	CEF

The following clauses describe the different fields used in the Charging Data messages and the category in the tables is used according to the charging data configuration defined in clause 5.4 of TS 32.240.

6.1.1.2 Charging Data Request message p. 18

Table 6.1.1.2-1 illustrates the basic structure of a Charging Data Request message from the CEF as used for performance and analytics based charging.

Table 6.1.1.2-1: Charging Data Request message contents

Information Element	Category for converged charging	Description
Tenant Identifier	O_M	This field if present is the identifier of subscriber of network slice.
NF Consumer Identification	M	Described in TS 32.290.
NF Functionality	M	Described in TS 32.290.
NF Name	O_C	Described in TS 32.290.
NF Address	O_C	Described in TS 32.290.
NF PLMN ID	O_C	Described in TS 32.290.
Invocation Timestamp	M	Described in TS 32.290.
Invocation Sequence Number	M	Described in TS 32.290.
One-time Event	O_C	Described in TS 32.290.
One-time Event Type	O_C	Described in TS 32.290.
Service Specification Information	O_C	Described in TS 32.290.
Multiple Unit Usage	O_C	Described in TS 32.290, with the exception that quota management is not applicable.
Rating Group	M	Described in TS 32.290
Used Unit Container	O_C	Described in TS 32.290
Local Sequence Number	O_M	Described in TS 32.290
NSPA Container Information	O_C	This field holds the network slice performance and analytics container specific information described in clause 6.2.1.3.
NSPA Charging Information	O_C	This field holds the network slice information, which is reported to the CHF described in clause 6.2.1.2.

6.1.1.3 Charging data response message p. 19

Table 6.1.1.3-1 illustrates the basic structure of a Charging Data Response message from the CHF as used for performance and analytics based charging.

Table 6.1.1.3-1: Charging Data Response message contents

Information Element	Category for converged charging	Description
Session Identifier	O_C	Described in TS 32.290.
Invocation Timestamp	M	Described in TS 32.290.
Invocation Result	O_C	Described in TS 32.290.
Invocation Sequence Number	M	Described in TS 32.290.

6.1.2 Ga message contents p. 19

Details of the Ga message contents are specified in TS 32.295.

6.1.3 CDR description on the Bns interface p. 19

6.1.3.1 General p. 19

This clause describes the CDR content and format generated for performance and analytics based charging.

The following table provide a brief description of each CDR parameter. The category in the tables is used according to the charging data configuration defined in clause 5.4 of TS 32.240. Full definitions of the CDR parameters, sorted by the name in alphabetical order, are provided in TS 32.298.

6.1.3.2 Network slice performance and analytics CHF CDR data p. 19

If enabled, network slice performance and analytics CDRs shall be produced for each network slice (i.e. S-NSSAI).

The fields of network slice performance and analytics CHF CDR are specified in Table 6.1.3.2-1.

Table 6.1.3.2-1: Network slice performance and analytics CHF record data

Field	Category	Description
Record Type	M	CHF record.
Recording Network Function ID	O_M	This field holds the name of the recording entity, i.e. the CHF id.
Tenant Identifier	O_M	This field if present is the identifier of subscriber of network slice.
NF Consumer Information	M	This field holds the information of the CEF that used the charging service.
NF Functionality	M	This field contains the function of the node (i.e. CEF)
NF Name	O_C	This field holds the name of the CEF used.
NF Address	O_C	This field holds the IP Address of the CEF used.
NF PLMN ID	O_C	This field holds the PLMN identifier (MCC MNC) of the CEF.
List of Multiple Unit Usage	O_M	This field holds a list of changes in charging conditions for one single Network Slice Selection Assistance. The list is categorized per rating group. Each change is time stamped.
Rating Group	O_M	This filed holds the rating group.
Used Unit Container	O_C	This field holds the information connected to the reported network slice.
Local Sequence Number	M	This field holds the container sequence number.
NSPA Container Information	O_C	This field holds the network slice performance and analytics container specific information described in clause 6.2.1.3.
NSPA Charging Information	O_M	This field holds the network slice performance and analytics charging information defined in clause 6.2.1.2.
Record Opening Time	M	Described in TS 32.298.
Duration	M	Described in TS 32.298.
Record Sequence Number	C	Described in TS 32.298.
Cause for Record Closing	M	Described in TS 32.298.
Local Record Sequence Number	O_M	Described in TS 32.298.
Record Extensions	O_C	Described in TS 32.298.

6.2 Network slice performance and analytics charging specific parameters p. 20

6.2.1 Definition of network slice performance and analytics charging information p. 20

6.2.1.1 General p. 20

The Charging Information parameter used for network slice performance and analytics charging is provided in the following clauses.

6.2.1.2 Definition of Performance and Analytics Charging Information p. 20

Specific charging information used for network slice performance and analytics charging is provided within the Performance and Analytics Charging Information.

The detailed structure of the Performance and Analytics Charging Information can be found in Table 6.2.1.2-1.

Table 6.2.1.2-1: Structure of NSPA Charging Information

Information Element	Category	Description
Single NSSAI	M	This field holds network slice information the performance and analytics information belongs to.

6.2.1.3 Definition of NSPA Container Information p. 21

Specific charging information used for network slice performance and analytics charging is provided within the NSPA Container Information.

The detailed structure of the NSPA Charging Information can be found in Table 6.2.1.3-1.

Table 6.2.1.3-1: Structure of NSPA Container Information

Information Element	Category	Description
Uplink Latency	O_C	This field holds uplink latency as described in clause 6.4 of TS 28.541 uLLatency attribute (see NOTE 1).
Downlink Latency	O_C	This field holds downlink latency as described in clause 6.4 of TS 28.541 dLLatency attribute.
Uplink Throughput	O_C	This field holds uplink throughput of one single network slice as described in clause 6.4 of TS 28.541 uLThptPerSlice attribute (see NOTE 2).
Downlink Throughput	O_C	This field holds downlink throughput of one single network slice as described in clause 6.4 of TS 28.541 dLThptPerSlice attribute.
Maximum packet loss rate UL	O_C	This field holds maximum packet loss rate uplink as described in clause 5.4 of TS 28.541 maxPacketLossRateUl attribute (see NOTE 3).
Maximum packet loss rate DL	O_C	This field holds maximum packet loss rate downlink as described in clause 5.4 of TS 28.541 maxPacketLossRateDl attribute.
Service Experience statistics data	O_C	This field holds service experience statistics data as described in TS 23.288
Number of PDU sessions	O_C	This field holds the number of PDU sessions as described in TS 28.554.
Number of registered Subscribers	O_C	This field holds the number of registered subscribers as described in TS 28.554.
Load level	O_C	This field holds the load level as described in TS 23.288.
NOTE 1: For the back compatible, by default, the Latency holds the uplink latency. NOTE 2: For the back compatible, by default, the Throughput holds the uplink throughput. NOTE 3: For the back compatible, by default, the Maximum packet loss rate UL holds Maximum packet loss rate uplink.

6.2.2 Formal network slice performance and analytics charging parameter description p. 21

6.2.2.1 Network slice performance and analytics CHF CDR parameters p. 21

The detailed definitions, abstract syntax and encoding of network slice performance and analytics CHF CDRs parameters are specified in TS 32.298.

6.2.2.2 Network slice performance and analytics resources attributes p. 21

The detailed definitions of resources attributes used for network slice performance and analytics charging are specified in TS 32.291.

6.2.3 Detailed message format for converged charging p. 21

The following clause specifies per Operation Type the charging data that are sent by CEF for network slice performance and analytics converged charging.

The Operation Types are listed in the following order: I (Initial)/T (Termination)/E (Event). Therefore, when all Operation Types are possible it is marked as ITE. If only some Operation Types are allowed for a node, only the appropriate letters are used (i.e. IT or E) as indicated in the Table heading. The omission of an Operation Type for a particular field is marked with "-" (i.e. I-E). Also, when an entire field is not allowed in a node the entire cell is marked as "-".

Table 6.2.3-1 defines the basic structure of the supported fields in the Charging Data Request message for CEF converged charging.

Table 6.2.3-1: Supported fields in Charging Data Request message

Information Element	Performance and Analytics	CEF
Information Element	Supported Operation Types	E
Tenant Identifier		E
NF Consumer Identification		E
Invocation Timestamp		E
Invocation Sequence Number		E
One-time Event		E
One-time Event Type		E
Multiple Unit Usage		E
Rating Group		E
Used Unit Container		E
Local Sequence Number		E
NSPA Container Information		E
NSPA Charging Information
Single NSSAI		E

Table 6.2.3-2 defines the basic structure of the supported fields in the Charging Data Response message for CEF converged charging.

Table 6.2.3-2: Supported fields in Charging Data Response message

Information Element	Performance and Analytics	CEF
Information Element	Supported Operation Types	E
Session Identifier		E
Invocation Timestamp		E
Invocation Result		E
Invocation Sequence Number		E

6.3 Bindings for network slice performance and analytics converged charging p. 22

This mapping between the Information Elements, resource attributes and CHF CDR parameters for network slice performance and analytics converged charging is described in clause 7 of TS 32.291.