Content for TS 25.142 Word version: 18.0.0
A Measurement Channels
B Propagation conditions
C Global in-channel Tx test
D Derivation of Test Requirements
E Acceptable uncertainty of Test Equipment
F General rules for statistical testing
$ Change History
A (Normative) Measurement Channels p. 212
A.1 Void
A.2 Reference measurement channel p. 212
A.2.1 UL reference measurement channel (12,2 kbps) p. 212
A.2.1.1 3,84 Mcps TDD option |R4| p. 212
A.2.1.2 1,28 Mcps option |R4| p. 213
A.2.1.3 7,68 Mcps TDD Option |R7| p. 214
A.2.2 UL reference measurement channel (64 kbps) p. 215
A.2.2.1 3,84 Mcps TDD option |R4| p. 215
A.2.2.2 1,28 Mcps TDD option |R4| p. 217
A.2.2.3 7,68 Mcps TDD Option |R7| p. 218
A.2.3 UL reference measurement channel (144 kbps) p. 219
A.2.3.1 3,84 Mcps TDD option |R4| p. 219
A.2.3.2 1,28 Mcps TDD option |R4| p. 221
A.2.3.3 7,68 Mcps TDD Option |R7| p. 222
A.2.4 UL reference measurement channel (384 kbps) p. 223
A.2.4.1 3,84 Mcps TDD option |R4| p. 223
A.2.4.2 1,28 Mcps TDD option |R4| p. 225
A.2.4.3 7,68 Mcps TDD Option |R7| p. 226
A.2.5 RACH reference measurement channel p. 227
A.3 E-DCH Reference measurement channels |R6| p. 232
A.3.1 E-DCH Fixed Reference Channels p. 232
A.3.1.1 3,84 Mcps TDD Option |R7| p. 232
A.3.1.1.1 Fixed Reference Channel 1 (FRC1) p. 232
A.3.1.1.2 Fixed Reference Channel 2 (FRC2) p. 233
A.3.1.1.3 Fixed Reference Channel 3 (FRC3) p. 233
A.3.1.2 1.28Mcps TDD Option |R7| p. 234
A.3.1.2.1 Fixed reference channel 1(FRC1) p. 234
A.3.1.2.2 Fixed reference channel 2(FRC2) p. 235
A.3.1.2.3 Fixed reference channel 3(FRC3) p. 236
A.3.1.2.4 Fixed reference channel 4(FRC4) p. 237
A.3.1.3 7,68 Mcps TDD Option |R7| p. 238
A.4 HS-SICH Reference measurement channels |R7| p. 241
A.4.1 3,84 Mcps TDD Option p. 241
A.4.2 1,28 Mcps TDD Option p. 241
B (Normative) Propagation conditions p. 243
B.1 Static propagation condition p. 243
B.2 Multi-path fading propagation conditions p. 243
B.2.1 3,84 Mcps TDD option |R4| p. 243
B.2.2 1,28 Mcps TDD option |R4| p. 243
B.2.3 7,68 Mcps TDD option |R7| p. 244
B.3 High speed train conditions |R9| p. 245
C (Normative) Global in-channel Tx test p. 247
C.1 General p. 247
C.2 Definition of the process p. 247
C.2.1 Basic principle p. 247
C.2.2 Output signal of the Tx under test p. 247
C.2.3 Reference signal p. 247
C.2.4 Classification of measurement results p. 248
C.2.5 Process definition to achieve results of type "deviation" p. 248
C.2.5.1 Decision Point Power p. 249
C.2.5.2 Code-Domain Power p. 249
C.2.6 Process definition to achieve results of type "residual" p. 249
C.3 Notes p. 251
C.3.1 Symbol length p. 251
C.3.2 Deviation p. 251
C.3.3 Residual p. 251
C.3.4 TDD p. 251
C.3.5 Synch channel p. 251
C.3.6 Formula for the minimum process p. 252
C.3.7 Formula for EVM p. 253
D Derivation of Test Requirements p. 253
E Acceptable uncertainty of Test Equipment p. 260
F (Normative) General rules for statistical testing |R5| p. 262
F.1 Statistical testing of receiver BER/BLER performance p. 262
F.1.1 Error Definition p. 262
F.1.2 Test Method p. 262
F.1.3 Test Criteria p. 262
F.1.4 Calculation assumptions p. 262
F.1.4.1 Statistical independence p. 262
F.1.4.2 Applied formulas p. 262
F.1.4.3 Approximation of the distribution p. 263
F.1.5 Definition of good pass fail decision p. 263
F.1.6 Good balance between test time and statistical significance p. 264
F.1.7 Pass fail decision rules p. 265
F.1.8 Test conditions for BER,BLER Tests p. 266
F.1.9 Practical Use (informative) p. 267
$ Change History p. 270
