Content for TS 25.142 Word version: 18.0.0
7 Receiver characteristics p. 138
7.1 General p. 138
7.2 Reference sensitivity level p. 139
7.2.1 Definition and applicability p. 139
7.2.2 Minimum Requirements p. 139
7.2.2.1 3,84 Mcps TDD option |R4| p. 139
7.2.2.2 1,28 Mcps option |R4| p. 140
7.2.2.3 7,68 Mcps TDD option |R7| p. 140
7.2.3 Test purpose p. 140
7.2.4 Method of test p. 140
7.2.4.1 Initial conditions p. 140
7.2.4.1.0 General test requirements |R4| p. 140
7.2.4.1.1 3,84 Mcps TDD option |R4| p. 140
7.2.4.1.2 1,28 Mcps TDD option |R4| p. 141
7.2.4.1.3 7,68 Mcps TDD option |R7| p. 141
7.2.4.2 Procedure p. 141
7.2.5 Test Requirements p. 141
7.3 Dynamic range p. 142
7.3.1 Definition and applicability p. 142
7.3.2 Minimum Requirements p. 142
7.3.2.1 3,84 Mcps TDD option |R4| p. 142
7.3.2.2 1,28 Mcps TDD option |R4| p. 142
7.3.2.3 7,68 Mcps TDD option |R7| p. 143
7.3.3 Test purpose p. 143
7.3.4 Method of test p. 143
7.3.4.1 Initial conditions p. 143
7.3.4.1.0 General test conditions |R4| p. 143
7.3.4.1.1 3,84 Mcps TDD option |R4| p. 143
7.3.4.1.2 1,28 Mcps TDD option |R4| p. 144
7.3.4.1.3 7,68 Mcps TDD option |R7| p. 144
7.3.4.2 Procedure p. 144
7.3.5 Test Requirements p. 144
7.4 Adjacent Channel Selectivity (ACS) p. 145
7.4.1 Definition and applicability p. 145
7.4.2 Minimum Requirements p. 145
7.4.2.1 3,84 Mcps TDD option |R4| p. 145
7.4.2.2 1,28 Mcps TDD option |R4| p. 146
7.4.2.3 7,68 Mcps TDD option |R7| p. 146
7.4.3 Test purpose p. 147
7.4.4 Method of test p. 147
7.4.4.1 Initial conditions p. 147
7.4.4.1.0 General test conditions |R4| p. 147
7.4.4.1.1 3,84 Mcps TDD option |R4| p. 147
7.4.4.1.2 1,28 Mcps TDD option |R4| p. 147
7.4.4.1.3 7,68 Mcps TDD option |R7| p. 148
7.4.4.2 Procedure p. 148
7.4.5 Test Requirements p. 149
7.5 Blocking characteristics p. 149
7.5.1 Definition and applicability p. 149
7.5.1.1 3,84 Mcps TDD option |R4| p. 149
7.5.1.2 1,28 Mcps TDD option |R4| p. 149
7.5.1.3 7,68 Mcps TDD option |R7| p. 149
7.5.2 Minimum Requirements p. 149
7.5.2.1 3,84 Mcps TDD option p. 149
7.5.2.1.1 General requirements |R4| p. 149
7.5.2.1.2 Co-location with GSM, DCS, UTRA-FDD and/or E-UTRA FDD |R4| p. 151
7.5.2.1.3 Void
7.5.2.2 1,28 Mcps TDD option p. 152
7.5.2.2.1 General requirements |R4| p. 152
7.5.2.2.2 Co-location with GSM, DCS, UTRA FDD and/or E-UTRA FDD, UTRA TDD and/or E-UTRA TDD |R4| p. 156
7.5.2.2.3 Void
7.5.2.3 7,68 Mcps TDD option |R7| p. 160
7.5.3 Test purpose p. 163
7.5.3.1 3,84 Mcps TDD option |R4| p. 163
7.5.3.2 1,28 Mcps TDD option |R4| p. 163
7.5.3.3 7,68 Mcps TDD option |R7| p. 163
7.5.4 Method of test p. 163
7.5.4.1 Initial conditions p. 163
7.5.4.2 Procedure p. 164
7.5.5 Test Requirements p. 165
7.6 Intermodulation characteristics p. 165
7.6.1 Definition and applicability p. 165
7.6.2 Minimum Requirements p. 165
7.6.2.1 3,84 Mcps TDD option |R4| p. 165
7.6.2.2 1,28 Mcps TDD option |R4| p. 166
7.6.2.3 7,68 Mcps TDD option |R7| p. 166
7.6.3 Test purpose p. 167
7.6.4 Method of test p. 167
7.6.4.1 Initial conditions p. 167
7.6.4.1.1 3,84 Mcps TDD option |R5| p. 167
7.6.4.1.2 1,28 Mcps TDD option |R5| p. 167
7.6.4.1.3 7,68 Mcps TDD option |R7| p. 167
7.6.4.2 Procedure p. 168
7.6.5 Test Requirements p. 169
7.7 Spurious emissions p. 169
7.7.1 Definition and applicability p. 169
7.7.2 Minimum Requirements p. 169
7.7.2.1 3,84 Mcps TDD option |R4| p. 169
7.7.2.2 1,28 Mcps TDD option |R4| p. 170
7.7.2.3 7,68 Mcps TDD option |R7| p. 170
7.7.3 Test purpose p. 171
7.7.4 Method of test p. 171
7.7.4.1 Initial conditions p. 171
7.7.4.1.0 General test conditions |R4| p. 171
7.7.4.1.1 3,84 Mcps TDD option |R4| p. 171
7.7.4.1.2 1,28 Mcps TDD option |R4| p. 171
7.7.4.1.3 7,68 Mcps TDD option |R7| p. 172
7.7.4.2 Procedure p. 172
7.7.5 Test Requirements p. 174
