Tech-
invite
3GPP
space
IETF
space
21
22
23
24
25
26
27
28
29
31
32
33
34
35
36
37
38
4‑5x
Content for
TS 36.141
Word version: 17.0.0
1…
3.2…
4…
5…
6…
7…
8…
A…
4
General test conditions and declarations
4.1
Measurement uncertainties and Test Requirements
4.2
Base station classes
4.3
Regional requirements
4.4
Selection of configurations for testing
4.5
BS Configurations
4.6
Manufacturer's declarations of regional and optional requirements
4.7
Specified frequency range and supported channel bandwidth
4.8
Format and interpretation of tests
4.9
Applicability of requirements
4.10
Test configurations for multi-carrier and/or CA operation
4.11
Applicability of test configurations
4.12
Requirements for BS capable of multi-band operation
4.13
Tests for BS capable of multi-band operation with three or more bands
...
4
General test conditions and declarations
Word‑p. 25
4.1
Measurement uncertainties and Test Requirements
4.1.1
General
4.1.2
Acceptable uncertainty of Test System
Word‑p. 26
4.1.2.1
Measurement of transmitter
Word‑p. 27
4.1.2.2
Measurement of receiver
Word‑p. 28
4.1.2.3
Measurement of performance requirement
Word‑p. 35
4.1.3
Interpretation of measurement results
Word‑p. 41
4.2
Base station classes
4.3
Regional requirements
4.4
Selection of configurations for testing
Word‑p. 44
4.5
BS Configurations
4.5.1
Transmit configurations
4.5.1.1
Transmission with multiple transmitter antenna connectors
Word‑p. 45
4.5.2
Receive configurations
4.5.2.1
Reception with multiple receiver antenna connectors, receiver diversity
4.5.3
Duplexers
Word‑p. 46
4.5.4
Power supply options
4.5.5
Ancillary RF amplifiers
4.5.6
BS with integrated Iuant BS modem
Word‑p. 47
4.5.7
BS using antenna arrays
4.5.7.1
Receiver tests
4.5.7.2
Transmitter tests
Word‑p. 48
4.6
Manufacturer's declarations of regional and optional requirements
4.6.1
Operating band and frequency range
4.6.2
Channel bandwidth
Word‑p. 49
4.6.3
Base station output power
4.6.4
Spurious emissions Category
4.6.5
Additional operating band unwanted emissions
4.6.6
Co-existence with other systems
Word‑p. 50
4.6.7
Co-location with other base stations
4.6.8
Manufacturer's declarations of supported RF configurations
|R10|
4.6.9
NB-IoT sub-carrier spacing
|R13|
Word‑p. 52
4.6.10
NB-IoT power dynamic range
|R13|
4.7
Specified frequency range and supported channel bandwidth
4.7.1
Base Station RF Bandwidth position for multi-carrier and/or CA testing
|R10|
4.7.2
Aggregated Channel Bandwidth position for Contiguous CA occupied bandwidth testing
|R10|
Word‑p. 53
4.7.3
NB-IoT testing
|R13|
4.8
Format and interpretation of tests
Word‑p. 54
4.9
Applicability of requirements
|R11|
4.10
Test configurations for multi-carrier and/or CA operation
|R10|
Word‑p. 55
4.10.1
ETC1: Contiguous spectrum operation
4.10.1.1
ETC1 generation
4.10.1.2
ETC1 power allocation
Word‑p. 56
4.10.2
ETC2: Contiguous CA occupied bandwidth
4.10.2.1
ETC2 generation
4.10.2.2
ETC2 power allocation
4.10.3
ETC3: Non-contiguous spectrum operation
|R11|
Word‑p. 57
4.10.3.1
ETC3 generation
4.10.3.2
ETC3 power allocation
4.10.3.24
VOID
4.10.4
ETC4: Multi-band test configuration for full carrier allocation
|R11|
4.10.4.1
ETC4 generation
4.10.4.2
ETC4 power allocation
Word‑p. 58
4.10.5
ETC5: Multi-band test configuration with high PSD per carrier
|R11|
4.10.5.1
ETC5 generation
4.10.5.2
ETC5 power allocation
Word‑p. 59
4.10.6
ETC6: NB-IoT standalone multi-carrier operation
|R13|
4.10.6.1
ETC6 generation
4.10.6.2
ETC6 power allocation
4.10.7
ETC7: E-UTRA and NB-IoT standalone multi-carrier operation
|R13|
4.10.7.1
ETC7 generation
4.10.7.2
ETC7 power allocation
Word‑p. 60
4.10.8
ETC8: E-UTRA and NB-IoT in-band multi-carrier operation
|R13|
4.10.8.1
ETC8 generation
4.10.8.2
ETC8 power allocation
4.10.9
ETC9: E-UTRA and NB-IoT guard-band multi-carrier operation
|R13|
4.10.9.1
ETC9 generation
4.10.9.2
ETC9 power allocation
Word‑p. 61
4.11
Applicability of test configurations
|R11|
4.12
Requirements for BS capable of multi-band operation
|R11|
Word‑p. 66
4.13
Tests for BS capable of multi-band operation with three or more bands
|R14|
Word‑p. 67