The present document specifies the digital test sequences for the GSM enhanced full rate speech codec. These sequences test for a bit exact implementation of the enhanced full rate speech transcoder (GSM 06.60 [2]), Voice Activity Detection (GSM 06.82 [6]), comfort noise (GSM 06.62 [4]) and the discontinuous transmission (GSM 06.81 [5]).
The following documents contain provisions which, through reference in this text, constitute provisions of the present document.
-
References are either specific (identified by date of publication, edition number, version number, etc.) or non specific.
-
For a specific reference, subsequent revisions do not apply.
-
For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document.
[1]
GSM 01.04: "Digital cellular telecommunication system (Phase 2+); Abbreviations and acronyms".
[2]
GSM 06.60: "Digital cellular telecommunications system (Phase 2+); Enhanced Full Rate (EFR) speech transcoding".
[3]
GSM 06.61: "Digital cellular telecommunications system (Phase 2+); Substitution and muting of lost frames for Enhanced Full Rate (EFR) speech traffic channels".
[4]
GSM 06.62: "Digital cellular telecommunications system (Phase 2+); Comfort noise aspects for Enhanced Full Rate (EFR) speech traffic channels".
[5]
GSM 06.81: "Digital cellular telecommunications system (Phase 2+); Discontinuous Transmission (DTX) for Enhanced Full Rate (EFR) speech traffic channels".
[6]
GSM 06.82: "Digital cellular telecommunications system (Phase 2+); Voice Activity Detection (VAD) for Enhanced Full Rate (EFR) speech traffic channels".
[7]
GSM 06.53: "Digital cellular telecommunications system (Phase 2+); ANSI-C code for the GSM Enhanced Full Rate (EFR) speech codec".
[8]
GSM 06.51: "Digital cellular telecommunications system (Phase 2+); Enhanced Full Rate (EFR) speech coding functions; General description".
Definition of terms used in the present document can be found in GSM 06.60 [2], GSM 06.61 [3], GSM 06.62 [4], GSM 06.81 [5] and GSM 06.82 [6].
For the purposes of the present document, the following abbreviations apply:
ETS
European Telecommunication Standard
GSM
Global System for Mobile communications
For abbreviations not given in this subclause see GSM 01.04 [1].
Digital test sequences are necessary to test for a bit exact implementation of the enhanced full rate speech transcoder (GSM 06.60 [2]), Digital test Voice Activity Detection (GSM 06.82 [6]), comfort noise (GSM 06.62 [4]) and the discontinuous transmission (GSM 06.81 [5]).
The test sequences may also be used to verify installations of the ANSI C code in GSM 06.53 [7].
Clause 5 describes the format of the files which contain the digital test sequences.
Clause 6 describes the test sequences for the speech transcoder.
Clause 7 describes the test sequences for the VAD, comfort noise and discontinuous transmission.
Clause 8 describes the method by which synchronisation is obtained between the test sequences and the speech codec under test.
Clause 9 describes the alternative acceptance testing of the speech encoder and decoder in the TRAU by means of 8 bit A- or μ-law compressed test sequences on the A-Interface.
Test sequences for an alternative and fully interoperable implementation using as a basis the 12.2 kbit/s mode of the Adaptive Multi Rate speech coder are described in section 10.
Electronic copies of the digital test sequences are provided as
clause 10, these digital test sequences are contained in the archive ts_100725v080100p0.zip which accompanies the present document.